For mixing a folk demo in a quiet student room, open-back studio headphones are a sensible starting point, provided sound leakage won’t disturb anyone. If you’re recording vocals or instruments at the same time, or sharing a room, a closed-back model is a better choice as it leaks less sound; RTINGS recommends closed-back headphones for recording. Check the fit and connection with your own device, and listen to the mix on another system too: Sonarworks points out that headphones have their own frequency response.
Who each design is right for
Mixing a folk demo in a quiet room
If you want to assess vocals, acoustic instruments and how they sit together in the mix, and you can listen without interruption, an open-back model could be a good fit. Make sure sound leakage won’t disturb anyone; for recording, RTINGS highlights the lower sound leakage of closed-back headphones.
Recording in a shared room
If you’re monitoring while singing or playing, or working alongside other people, isolation and keeping sound away from the microphone are important factors to consider. How well a pair of headphones isolates you also depends on how they fit.
Mixing on a laptop for long sessions
For longer sessions, consider how the headphones fit you, whether the connection is compatible, and how loud they can get from your laptop or audio interface. Also check whether replaceable parts, such as the ear pads, are available for the exact model variant.
What to consider when buying
Open-back
A good fit if: you’re monitoring vocals and acoustic guitar in a quiet space, and sound leakage won’t disturb anyone.
Trade-off: This design offers little isolation and may not be suitable when recording with a microphone at the same time.
Closed-back
A good fit if: you’re recording in the same room or background noise is distracting you while you work.
Trade-off: The level of isolation you get also depends on how the ear pads fit.
Semi-open
A good fit if: your room is usually quiet and some sound leakage is acceptable.
Trade-off: For quiet recordings, don’t assume this design will provide the same isolation as a closed-back model without testing it first.
When mixing a folk demo in a student room, the main thing to consider is whether you need to monitor without interruption or record at the same time.
| Buying criterion |
What to check when buying |
Who it matters most to |
| Assessing the sound |
Listen to familiar speech and music, then check a test mix on a second listening system. |
If I want to assess vocals and acoustic instruments in a mix, I need sound reproduction I can interpret reliably. Around 36% of consumers are likely to prioritise sound quality above all else when buying. |
| Isolation |
Check the design and fit; during a test recording, listen for any headphone sound picked up by the microphone. |
If I’m working in a shared room or recording at the same time, I want to limit background noise and sound reaching the microphone. Around 29% of consumers are likely to prioritise isolation above all else when buying. |
| Fit and replacement parts |
Test the fit for a realistic working session and check whether replacement ear pads or cables are available for the exact variant. |
If I’m mixing for a long time, I want to avoid pressure points and know whether worn parts can be replaced. Around 21% of consumers are likely to put comfort and durability first. |
| Connection and drive requirements |
Check the headphone output and the plug you need; try the volume you want on your own device at a moderate level. |
If I’m working on a laptop or audio interface, the headphones need to match its connection and deliver enough volume. Around 14% of consumers are likely to prioritise connection and drive requirements above all else when buying. |
Common buying and usage pitfalls
-
Open-back headphones are automatically suitable for recording vocals
When you’re recording with a microphone, sound from open-back headphones can bleed into the recording.
Consider mixing and microphone recording separately, and check before you record whether the microphone picks up sound from your headphones.
-
The design or the word “studio” guarantees a reliable mix
Headphones have their own frequency response, so a manufacturer’s description is no substitute for checking the mix elsewhere.
Use familiar reference tracks and listen to the demo mix on another system if one is available.
If the mix sounds different on other systems, you may need to make further adjustments.
-
The DT 770 PRO and DT 770 PRO X are the same variant
According to beyerdynamic, the 80-ohm DT 770 PRO has a fixed cable, while the separate DT 770 PRO X is listed with a detachable cable and 48 Ohms.
Before buying, check the full model name, impedance variant, plug and cable.
Brands to consider
beyerdynamic
The open-back DT 900 PRO X is intended for mixing, according to the manufacturer; closed-back models such as the DT 770 PRO and DT 770 PRO X are designed for different monitoring and recording conditions.
- beyerdynamic lists a detachable cable and several replacement parts for the DT 900 PRO X.
- The 80-ohm DT 770 PRO has a fixed cable. Manufacturer sound descriptions are not independent measurements.
Audio-Technica
The closed-back ATH-M40x is described by the manufacturer as suitable for recording, mixing and monitoring, making it an option when isolation is important.
- Audio-Technica lists a foldable design and passive isolation.
- The manufacturer’s claim of neutral sound reproduction has not been independently confirmed; check the fit and how your mixes translate separately.
Sennheiser
The open-back HD 490 PRO is a studio mixing model; the also-open-back HD 600 is sold as a reference headphone. Closed-back HD models are designed for different monitoring and recording tasks.
- Sennheiser lists two pairs of ear pads and replaceable ear pads for the HD 490 PRO.
- According to the official specifications, the HD 600 has an impedance of 300 Ohms. Check that your device’s output is suitable; manufacturer descriptions don’t prove that a model will suit your personal sound preferences.
AKG
The K240 Studio is a semi-open option for a quiet listening space, provided sound leakage is acceptable.
- AKG lists a detachable cable with a Mini XLR connection.
- For quiet microphone recordings, don’t assume the semi-open design will provide enough isolation without testing it first.
Sony
The closed-back MDR-7506 is another monitoring option for recording in a room.
- Sony lists an impedance of 63 Ohms and includes a 3.5 mm/6.3 mm adapter.
- These specifications alone don’t prove that the headphones will deliver neutral sound for folk mixing or fit you well.
Joybuy products
Related products will be available soon.
Frequently asked questions
Can I use the same open-back headphones for recording vocals and mixing?
If a microphone is recording at the same time, sound from open-back headphones can bleed into the recording. Try a test recording; for this situation, a well-fitting closed-back model is the more obvious starting point.
How do I connect the headphones to a laptop or audio interface?
Check that the headphone output matches the plug and accessories supplied with the exact model variant. For example, the DT 900 PRO X is listed with a 3.5 mm plug and a 6.35 mm adapter; check on your own device whether it can reach a suitable volume.
What should I bear in mind during long mixing sessions and when caring for my headphones?
Check the fit over a longer session and whether ear pads and cables are available for your specific model. Keep the volume moderate and take listening breaks; the World Health Organization explains that volume and listening duration both affect the risk.
What are my rights when buying online in Germany?
Online purchases generally come with a 14-day right to cancel; the consumer advice centre says the period starts from the conclusion of the contract or receipt of the goods ordered. The statutory guarantee for faulty goods is separate from a voluntary warranty; the circumstances of the contract and any exceptions may be relevant in individual cases.
Can I put old studio headphones in my household rubbish?
No. The German Environment Agency points out that waste electrical equipment should be collected separately and must not go in household rubbish.