Who are the different designs best suited to?

Mixing at a shared desk

If someone is working beside you, background noise and sound leaking from your headphones will affect which design is right for you. Thomann’s guide to headphone designs describes open-back models as offering little isolation.

Vocal producers with a recording setup

If you switch between recording and mixing at the same desk, sound from your headphones can leak into the microphone. KRK describes the KNS 8402 as a closed-back model for setups where isolation or vocal recording matters.

Mixing during quiet periods

If your workspace is quiet and sound leakage won’t disturb anyone, open-back models are also worth considering. Beyerdynamic and Sennheiser both list open-back models for mixing.

What should you look for when buying?

Closed-back

A better fit if: you mix right beside other people, need to block out background noise or record in the same spot.

The trade-off: headphones can feel warm or tight during longer sessions; you should also check the sound with your own vocals.

Open-back

A better fit if: the shared desk is quiet and sound leakage won’t bother anyone.

The trade-off: background noise gets in more easily and other people can hear what you’re listening to; sound bleed can also be an issue when using a microphone.

Semi-open

A better fit if: you can try the particular model at your own workspace to see whether its compromise works for you.

The trade-off: this design isn’t soundproof, so you’ll still need to check whether other people can hear the sound or a microphone picks it up.

Buying criterion What to look for Who is it important for?
Isolation and sound leakage Check the closed-back ear cups and how they fit your head; if you’re recording, test for sound bleed with your microphone. When I’m working at a shared desk, I want to avoid disturbing others and make sure background noise doesn’t mask quiet vocals. Around 36% of consumers prioritise isolation and low sound leakage.
Vocal balance and stereo separation Assess quiet harmony vocals, the mid-range and panning using your own reference tracks; check the finished mix on a second playback system too. When layering vocals, I want to judge the level and position of each voice reliably. Around 29% of consumers prioritise vocal balance and stereo separation.
Comfort during long sessions Try them on with your own glasses for a realistic length of time; check the condition of the ear pads and whether replacements are available. When I’m working on lots of vocal tracks over an extended period, I want the fit and ear pads to stay comfortable. Around 21% of consumers prioritise long-term comfort.
Connections and maintenance Check the plug size, adapter and cable length against your audio interface; check what’s included with the specific model. If I want to use the connections I already have and replace the cable or ear pads when needed, the exact model variant matters. Around 14% of consumers prioritise connections and maintenance.

Avoiding buying pitfalls

  • Only thinking about the person at the next desk after you’ve bought

    Open-back ear cups let background noise in and allow sound to escape. This can disturb others at a shared desk.

    Before buying, find out whether the space will be quiet while you’re mixing and whether sound leakage is acceptable.

  • Assuming closed-back means an automatically uncoloured sound

    The design can improve isolation, but Thomann’s guide also notes that it can introduce resonance and other changes to the sound.

    Test the specific model with your own vocals and check the mix on another playback system as well.

  • Assuming similarly named variants are interchangeable

    Audio-Technica’s replacement cable information applies to certain wired ATH-Mx models, not the ATH-M50xBT2 or ATH-M50xBT. Impedance can also vary between DT-770-PRO versions.

    Check the full model name, socket and what’s included rather than comparing series names alone.

Key brands at a glance

beyerdynamic

The closed-back DT 700 PRO X is worth considering for a shared workspace; the DT 900 PRO X is an open-back option for quiet sessions.

  • beyerdynamic specifically lists the DT 700 PRO X for mixing too.
  • This is the manufacturer’s claim for this model, not an independent listening comparison. The open-back DT 900 PRO X offers little isolation at a shared desk.

Audio-Technica

The wired ATH-M50x is a closed-back model that may suit you if you need a replaceable cable.

  • Audio-Technica describes the ATH-M50x as closed-back; its European accessories information lists compatible replacement cables for certain wired ATH-Mx models.
  • This compatibility information doesn’t apply to the ATH-M50xBT2 or ATH-M50xBT. A manufacturer’s assessment of the sound doesn’t prove that vocal harmonies will sound neutral.

Sennheiser

The open-back HD 490 PRO is an option for quiet mixing sessions.

  • Sennheiser includes two sets of ear pads with different sound signatures; according to the manufacturer, the pads are washable and replaceable.
  • Open-back ear cups offer little isolation, so they’re not suitable if others at the desk need quiet or a microphone is in use at the same time.

KRK

The closed-back KNS 8402 may suit a workspace where isolation or vocal recording matters.

  • KRK lists replaceable ear pads and cables.
  • The manufacturer’s stated isolation of up to 30 dBA depends on the conditions, so it’s no guarantee of how well they’ll fit your head or work at your desk.

Audeze

The open-back LCD-X is a mixing option for quiet workspaces.

  • Audeze describes the design as open-back and highlights its spatial presentation.
  • An open-back design offers little isolation at a shared desk. The manufacturer’s information alone doesn’t confirm whether a particular edition is suitable or what’s included.

Suitable products at Joybuy

Suitable products will be available soon.

Frequently asked questions

Can I use closed-back headphones to mix vocal harmonies?

Yes, a closed-back model may be suitable, provided you test the specific headphones with your own tracks. Manufacturer beyerdynamic specifically lists the DT 700 PRO X for mixing too; Thomann’s general guide also notes that closed-back headphones can affect the sound. So check important decisions on a second playback system as well.

What should I check first at my workspace?

First, make sure the output socket is compatible with the plug and adapter supplied with the specific model. If you record vocals in the same spot, test with your microphone to see whether headphone sound gets into the recording; a closed-back design can reduce this risk.

How should I look after studio headphones I use regularly?

Follow the care instructions for the specific model and check whether the ear pads and cable can be replaced separately. Sennheiser says the HD 490 PRO’s ear pads are washable and replaceable; Audio-Technica’s replacement cables are for certain wired ATH-Mx models.

What are my return and guarantee rights when buying online?

For a distance purchase from a trader in the EU, you generally have 14 days from delivery to withdraw from the contract. According to Your Europe, you may have to pay the return postage if the seller has correctly informed you and doesn’t cover the cost. Separately, faulty goods are covered by a legal guarantee of at least two years from the seller; check who your seller is and which terms apply to your purchase.

How can I protect my hearing during long mixing sessions?

The World Health Organization recommends keeping the volume low and giving your ears regular breaks from loud sounds. If a reliable volume indicator is available, it also recommends staying below an average of 80 dB. This is health advice, not a general legal limit for every private headphone mix.