For repeatable level comparisons, you need a stereo system that you can set up as symmetrically as possible around a fixed listening position. Keep the settings constant and measure the loudness of the files separately. The EBU recommends loudness measurement for normalising broadcast programmes, not as a mandatory target for every private recording. In a very quiet room, you should also check whether a monitor or the signal chain produces noise at close range (Genelec Support). A compact pair simplifies the number of units you need, while individually sold monitors and optional room calibration require more space or additional compatible equipment.
Who are studio monitors for?
People comparing recordings from a fixed listening position
If you repeatedly listen to different versions side by side, a consistent stereo set-up and unchanged listening settings will help. Check the loudness of the files separately; the EBU recommends measuring programme loudness for broadcast programmes.
People working quietly at a desk
At close range in a quiet room, check in advance whether you can hear noise from the monitor or signal chain. Genelec Support explains that the self-noise of active speakers can be noticeable in these conditions.
People with a challenging set-up location
If your desk, a wall or other objects limit the space available, it’s important to point both speakers towards the listening position in a comparable way. Genelec recommends a symmetrical set-up; placement controls can help you fine-tune it, but they don’t replace correct positioning.
What should you look for when buying?
First, decide whether a pair in one package or two individually sold monitors will suit your room. Then consider whether the signal chain is right for you, whether you can keep the listening settings unchanged and whether you can check for noise from your actual listening position.
| Priority |
What to check before buying |
Who it matters most to |
| Consistent comparisons |
The controls and signal chain should let you keep settings consistent; measure file loudness separately. |
If you repeatedly compare versions from a fixed listening position, you’ll want to keep the listening settings constant and assess file loudness separately. Around 28% of consumers prioritise this consistency when comparing. |
| Self-noise |
At your intended listening distance, check with no audio playing whether the noise comes from the monitor or the signal chain. |
If you work close to the speakers in a particularly quiet room, you’ll want to spot any distracting noise and identify its source. Around 22% of consumers put low background noise first. |
| Set-up and room |
Allow space for two speakers to be positioned in a comparable way; consider adjustment controls only after positioning them. |
If your desk and walls limit where you can place the speakers, you’ll need a set-up that lets you point both monitors towards the same listening position. Around 22% of consumers prioritise placement and the effect of the room when buying. |
| Connections and controls |
Check the outputs, inputs and cables you’ll need; if there are listening modes, check which one is selected. |
If you want to connect your existing audio equipment and keep track of the settings each time you compare, the connections and controls need to suit your set-up. Around 17% of consumers prioritise connections and straightforward controls. |
| Complete stereo system |
Check what’s included in the package and whether you’ll need additional equipment for room calibration. |
If you want to set up a complete system, it’s important to know whether the package contains a pair or just one monitor, and what extra accessories you’ll need. Around 11% of consumers focus on the number of units required and any additional equipment. |
Common buying and set-up mistakes
-
Assuming a single monitor is a complete stereo pair
According to the manufacturer, the Genelec 8030C is packaged individually, while Yamaha lists the HS3 as a pair. The package contents aren’t the same.
Before comparing options, check how many monitors are included and plan for a complete stereo set-up.
With individually packaged monitors, you’ll need two units for stereo; the connecting cables must also be suitable for your signal chain.
-
Comparing the lowest frequency figure directly with other models
Yamaha specifies a lower limit of 70 Hz at −10 dB for the HS3. Without the same measurement conditions, it’s not fair to compare this figure with a frequency rating measured in a different way.
Compare frequency ratings only alongside their measurement conditions, then take your listening position and room into account.
-
Treating room calibration as a substitute for correct positioning
An extra adjustment option doesn’t replace positioning both speakers around your listening position. The Neumann MA 1 also requires compatible equipment.
First, position the monitors as symmetrically as possible. Then consider whether a compatible calibration solution would be useful for your fixed listening position.
For the MA 1, Neumann lists a measurement microphone and a suitable audio interface among the additional requirements.
-
Accidentally changing the sound mode while comparing
According to the manufacturer, the Edifier MR4 offers Monitor and Music modes. Switching between them changes the conditions for comparison.
Check which mode is selected and leave it unchanged while comparing recordings.
Key brands to consider
Yamaha
The HS3 is a compact pair for a workspace with limited room and several wired inputs.
- Yamaha specifies a pair in each package, a front-mounted volume control, and ROOM CONTROL and HIGH TRIM.
- The stated lower limit of 70 Hz applies at −10 dB. It doesn’t indicate the self-noise or sound at your individual listening position.
Neumann
The KH 80 DSP is a compact nearfield monitor for a fixed workspace, where adjustment for its placement or optional MA 1 calibration may be useful.
- Neumann documents a rear switch for making basic adjustments to suit the monitor’s position.
- The MA 1 requires additional compatible equipment; the manufacturer’s specifications don’t demonstrate how it will perform in your particular room.
Genelec
The 8030C is an active nearfield monitor, packaged individually, with rear switches for room adjustment.
- Genelec specifies room adjustment switches and one monitor per package.
- Genelec Support notes that self-noise can be audible at close range in very quiet rooms. This general explanation isn’t an individual measurement of the 8030C.
ADAM Audio
The T7V is a nearfield model sold individually, with a larger cabinet and a rear-facing bass reflex port.
- ADAM Audio specifies a 7-inch woofer for the T7V.
- If space is tight or the monitor will sit close to a wall, check the cabinet dimensions and positioning. A manufacturer’s bass response specification alone doesn’t demonstrate accuracy when comparing levels quietly.
PreSonus
The Eris 3.5 2nd Gen is sold as a compact pair, with several analogue inputs and front-mounted controls.
- PreSonus specifies a front-mounted control, a headphone output and tone controls.
- For repeatable comparisons, the settings need to remain constant. The manufacturer’s claims about sound accuracy aren’t an independent measurement in your home studio.
Edifier
The MR4 is a desk-based system for people who want to monitor recordings as well as listen to music day to day.
- Edifier documents a balanced TRS input, along with Monitor and Music modes.
- Changing modes can affect the conditions for comparison. The tuning described by the manufacturer isn’t an independent measurement at your individual listening position.
Products for you on Joybuy
Suitable products coming soon.
Frequently asked questions
Do studio monitors automatically make recordings with different loudness levels sound equally loud?
No. Keep the listening settings constant while comparing, and measure the loudness of the audio files separately. The EBU recommends loudness measurement for normalising broadcast programmes; a reference value isn’t a general requirement for private recordings.
How should I position two monitors on my desk?
Point both speakers towards your listening position, aim for equal distances and position them at an angle of around 60° to each other. This is a set-up recommendation from Genelec, not a guarantee against reflections or room modes.
What should I check if a monitor makes a noise when no music is playing?
First, check whether the noise is coming from the speaker itself or from the source and cabling. Genelec Support explains that the self-noise of active monitors can be audible at close range in particularly quiet rooms; this doesn’t tell you the noise level of another model.
What extra equipment do I need for Neumann MA 1?
For calibrating a compatible system, Neumann lists the MA 1 measurement microphone, a computer and an audio interface with a balanced microphone input, 48 V phantom power and enough outputs, among other requirements. Check the full requirements for your specific set-up.