Who this selection is for

Checking archival audio

You check restored speech or music recordings and want to distinguish playback issues from faults in the file. The International Association of Sound and Audiovisual Archives describes quality control as an important part of audiovisual preservation.

Limited desk space

You want to set up a clear stereo system at your computer and first need to work out the space, connections and positioning. Genelec points out that room acoustics and speaker placement, as well as the speakers themselves, affect what reaches your listening position.

Home office with an audio interface

You have room to position two monitors separately and want to compare connections, bass specifications and possible room correction options.

What to consider when choosing

When checking restored recordings, consider the speakers and listening position together: Genelec points out that room acoustics affect playback.

Consideration What to check before buying Who is this particularly important to?
Assessing details and artefacts Check whether you can set playback modes consistently, and note down the settings when comparing recordings. If I want to assess voices, details and restoration artefacts, I need consistent playback conditions. Around 29% of consumers put checking detail first.
Desk positioning Measure the available space and listening distance; aim for a symmetrical layout, with both monitors at the same height. When space is limited, I want to be able to position both monitors to suit my listening position. Around 24% of consumers prioritise suitable positioning in a small room.
Assessing low frequencies Compare frequency specifications only alongside their dB reference level, and take the room at your listening position into account. If I want to assess the low frequencies in a recording, I need to interpret the specifications alongside their reference level. Around 18% of consumers prioritise checking bass.
Connecting to a computer or interface Match your source’s outputs to the inputs on the specific model, such as USB-C, XLR, TRS or RCA. I want to connect the monitors to my computer or existing audio interface in a suitable way. Around 17% of consumers consider the signal path their most important concern.
Complete stereo system Check the number of units, what’s included, which cables you’ll need and whether you need any additional calibration equipment. To get my stereo system ready to use, I want to check the number of units and required accessories before comparing products. Around 12% of consumers place the greatest emphasis on the overall setup.

Common buying mistakes

  • Assuming a single monitor is the same as a stereo pair

    The Yamaha HS5 and KRK ROKIT 5 Generation Five are sold as individual monitors, while ADAM Audio describes the D3V as a pair. So an offer for one unit does not automatically include a complete stereo system.

    Check the number of units and what’s included before buying. If necessary, budget for a second monitor and suitable connection cables.

    A stereo system may require a second monitor in addition to the first.

  • Choosing solely by the lowest Hertz figure

    The stated frequency limits use different dB reference levels, and the room also affects the bass at your listening position. The figures are therefore not always directly comparable.

    Read the frequency limit and dB reference level together, and consider speaker placement and your listening position before using specification-sheet figures to make a buying decision.

  • Treating automatic room correction as a complete solution

    Neumann MA 1 requires, among other things, an MA 1 measurement microphone and a suitable audio interface. Calibration is no substitute for positioning your monitors sensibly.

    Before buying, check the requirements for the specific model and make sure they work with your existing interface and planned listening position.

Relevant brands and product ranges

ADAM Audio

The D3V is described as a compact desktop pair; the T5V and T7V are separate active nearfield monitors.

  • ADAM Audio says the D3V offers USB-C, two balanced TRS sockets and included desktop stands. According to the manufacturer, the T Series offers XLR and RCA connections.
  • These specifications do not prove that restoration faults are easier to detect. The T Series has rear-facing bass ports.

Yamaha

The HS Series comprises active nearfield monitors designed to be positioned separately; the HS5 is a documented model.

  • Yamaha Europe lists balanced XLR and jack inputs, as well as ROOM CONTROL and HIGH TRIM, for the HS5.
  • Yamaha specifies 74 Hz at −3 dB for the HS5. One HS5 is a single monitor, not a stereo pair.

Genelec

The 8010A is a compact option; the 8030C is a larger model from the same manufacturer.

  • Genelec gives the 8010A dimensions of 195 × 121 × 115 mm with the Iso-Pod, and a lower frequency limit of 67 Hz at −6 dB. For the 8030C, the manufacturer specifies 47 Hz at −6 dB.
  • These figures do not allow for a general conclusion about how well restoration faults can be detected with either model.

KRK

According to the manufacturer, the ROKIT 5 Generation Five offers different listening modes and EQ options.

  • KRK describes Mix, Focus and Create modes, as well as 25 EQ combinations.
  • The modes change the playback. For a consistent comparison, keep the selected setting the same.

Neumann

The KH 120 II is a nearfield monitor with optional automatic room correction via MA 1.

  • For the KH 120 II, Neumann recommends a listening distance of 1–2 m and specifies a frequency range of 44 Hz to 21 kHz at ±3 dB.
  • MA 1 requires, among other things, an MA 1 measurement microphone and a suitable audio interface. The manufacturer’s specifications are no substitute for assessing your own room.

Joybuy products

Similar products coming soon.

Frequently asked questions

How should I position two monitors to check archival audio?

Point both monitors towards your listening position and start with a layout that is as symmetrical as possible. Genelec describes a 60° angle between the left and right monitors at the listening position. Then check playback in the room, as reflections and room modes can affect it.

Do I need a separate amplifier for active monitors?

The models described here are active, so they do not need a separate power amplifier. ADAM Audio describes the D3V as connecting directly to a computer via USB-C; with the Yamaha HS5, you’ll need a suitable analogue XLR or jack output.

What should I plan for with a stereo system or automatic calibration?

First check whether the offer includes one monitor or a pair. For Neumann MA 1, the manufacturer also specifies an MA 1 measurement microphone and a suitable audio interface; any other accessories you need will depend on your signal chain.

Which consumer rights and markings matter when buying in Germany?

When buying as a consumer, the seller’s statutory liability for defects is distinct from a voluntary guarantee. The European Commission states that a two-year period generally applies to liability for a lack of conformity that becomes apparent within that period; the terms of the specific purchase remain relevant. CE requirements apply only to products for which the relevant EU rules require the marking. CE is not a sound-quality seal.