Who these monitors might suit

People checking restoration work

You compare the original, the processed version and, where available, the removed residual signal, so that wanted speech or music doesn’t disappear along with the noise unnoticed. The Audacity manual recommends listening to the residual signal too, to help assess possible damage to the wanted audio.

People working at a compact listening setup

You need to position two channels alongside your screen and work surface in a way that minimises the effect of reflections from the desk and room on your assessment. Genelec recommends angling both monitors towards your listening position and planning a symmetrical stereo setup.

Archive listeners with a fixed computer setup

You need a playback path that suits your files and the outputs you already have. Manufacturer information from ADAM Audio, Kali Audio and Yamaha shows why USB desktop pairs, analogue pairs and two monitors sold individually differ in their connections and what’s included in the box.

Buying priorities and points to check

Compact stereo desktop pair

A good fit if: desk space is limited and you want to connect your computer directly via USB-C or through suitable analogue outputs.

Consider: USB-C alone doesn’t tell you the format in which a particular model processes files internally. Your desk and room will also affect playback.

Two analogue nearfield monitors sold individually

A good fit if: your interface has suitable analogue outputs and you can position both speakers evenly at your listening position.

Consider: if a model is sold individually, you’ll need to budget for two monitors for stereo. Optional calibration may require additional components.

Compact analogue stereo pair

A good fit if: you don’t need USB audio, want to switch between analogue sources and are looking for a package sold as a pair.

Consider: check that your existing analogue outputs match the inputs. Frequency figures can only be compared when they use the same dB reference.

Priority What to check before buying Relevant consumer need
Assessing restoration artefacts Listen to comparison passages at your intended listening position; check whether you can listen to a removed residual signal separately. When restoring quiet passages, I want to be able to assess the wanted audio and removed noise separately. Around 33 % of consumers prioritise checking for possible restoration artefacts.
Desk placement Measure the available space and listening distance; plan for matching heights and distances, with both monitors angled towards your seat. When space is limited, I want to position both channels symmetrically alongside my screen and assess them from my actual listening position. Around 27 % of consumers prioritise a space-saving setup.
Choosing the right signal path Check your computer or interface outputs against the model’s inputs, and consider how the chosen input processes digital audio. When playing archive files through my existing computer or interface setup, the signal path needs to match the connections and file format. Around 20 % of consumers put this connection path first.
A complete stereo setup Check what’s included in the box and which cables you’ll need. If you’re planning to use MA-1 calibration, also factor in the measurement microphone, interface and network components. When I want to listen in stereo or use calibration, I want to know which speakers and additional components I’ll actually need. Around 20 % of consumers prioritise a complete stereo setup and, where relevant, calibration equipment.

Common buying and comparison mistakes

  • Assuming one monitor is a complete stereo pair

    Genelec lists the 8010A as one monitor per box, while Yamaha lists the HS3 as a pair. The packaging information therefore refers to different quantities.

    Before deciding what you need for stereo, check the number of units in the specific offer, how many channels you need and which cables are required.

  • Assuming USB-C guarantees unchanged playback of every archive format

    ADAM Audio states that the D3V processes audio internally at 48 kHz and 16 Bit in USB mode. This doesn’t mean that 96- or 192-kHz files are played back in their original format.

    Check the format specifications for the exact input you plan to use.

  • Comparing different frequency limits directly

    Genelec specifies 67 Hz at −6 dB for the 8010A; Yamaha specifies 70 Hz at −10 dB for the HS3. The different dB references mean these figures aren’t directly comparable.

    Always check frequency figures alongside their dB reference, and assess the bass at your intended listening position.

  • Assuming automatic calibration is included with the monitor package

    Neumann’s documented MA-1 calibration for the KH 80 DSP requires, among other things, an MA-1 measurement microphone, a suitable audio interface and a network connection.

    Distinguish between settings on the monitor itself and a planned MA-1 measurement, and check the full hardware requirements for the latter.

Key brands to consider

ADAM Audio

The D3V is a compact desktop stereo system which, according to the manufacturer, is supplied as a pair and is designed for computer or analogue playback.

  • ADAM Audio lists USB-C and two balanced TRS inputs.
  • In USB mode, the internal processing runs at 48 kHz and 16 Bit, according to ADAM Audio. This doesn’t confirm playback of 96- or 192-kHz files in their original format.

Kali Audio

The LP-UNF is a desktop stereo system with inputs for digital and analogue sources, as well as settings for different desk and wall positions.

  • Kali Audio lists USB-C, balanced TRS and unbalanced RCA inputs. The manufacturer specifies 24 Bit and 48 kHz for the digital input.
  • A promoted desk-tuning feature doesn’t independently confirm how the system will sound in your particular room.

Yamaha

The HS3 is a compact analogue monitor pair for connecting multiple analogue sources.

  • Yamaha’s European specifications list XLR/TRS, RCA and stereo mini-jack inputs, and confirm that the monitors are packaged as a pair.
  • The stated frequency limits can only be meaningfully assessed alongside their respective dB references.

Genelec

The 8010A is a particularly small analogue nearfield monitor, supplied individually; you’ll need two for stereo.

  • Genelec specifies a width of 121 mm, an analogue XLR input and room controls on the rear panel.
  • The lower frequency limit of 67 Hz is specified at −6 dB, so it isn’t directly comparable with manufacturer figures defined differently.

Neumann

The KH 80 DSP is a compact DSP nearfield monitor for an analogue-connected setup, with optional calibration available.

  • Neumann describes optional room-tuning tools. The documented MA-1 calibration supports the KH 80 DSP.
  • The MA-1 calibration described requires, among other things, an MA-1 measurement microphone, a suitable interface and a network connection.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I check whether noise reduction has removed wanted audio?

Compare an original passage with the processed version and, if your restoration software allows it, listen to the removed residual signal too. The Audacity manual recommends this check to help assess possible damage to the audio you want to keep.

How should I position two monitors in my home office?

Angle both monitors towards your listening position and aim for symmetrical heights and side-to-side spacing. For stereo, Genelec recommends an equilateral triangle, ideally with a 60° angle between the monitors. Then check how your desk and walls affect the sound from your listening position.

Do I only need two KH 80 DSP monitors for Neumann’s MA-1 calibration?

No. Neumann’s documented requirements also include, among other things, the MA-1 measurement microphone, a suitable audio interface and a network connection for the speakers.

Is a manufacturer’s guarantee the same as your statutory rights?

No. The consumer advice centre distinguishes between your statutory rights against the seller and a voluntary guarantee. Check the terms of any guarantee offered separately; it isn’t the same as your statutory rights.

What should I know about electrical product labelling and disposal?

The European Commission explains that CE marking is only required for products covered by relevant harmonised EU legislation that requires it. The crossed-out wheelie bin symbol indicates that the product must be collected separately. For information about local collection points, the Federal Environment Ministry directs consumers to their local authority.