Who are these studio monitors for?

People digitising cassettes

When transferring a cassette, you need to keep the recording path separate from the monitors’ playback path. The Audacity Manual advises against using your computer’s microphone input.

People listening while standing

If you listen at a raised desk, you need space to position both speakers towards your actual listening position. Genelec recommends angling monitors towards the listening position.

People with limited desk space

When space is tight, the dimensions of both speakers matter, as do the connections and whether the listing is for a single unit or a stereo pair.

What should you look for when choosing?

First check the recording and playback paths, then make sure the speakers can be positioned for listening while standing. Finally, check whether the package includes everything you need for a complete stereo system.

When buying studio monitors for cassette transfers at a standing desk, one main concern tends to take priority. The proportions below relate to these four concerns.

Concern What to look for when buying Who is most affected?
Recording and listening paths Match the cassette deck’s line output to a suitable recording input; connect the monitor inputs to the playback output. If you want to connect your recording and listening equipment correctly, a suitable signal path matters more than extra speaker features. Around 29 % of consumers have this as their main concern.
Positioning for listening while standing Check that there’s room for both speakers and that you can angle them towards your actual listening position; the cables must be able to accommodate the desk’s full range of movement. If you need a reliable listening position while standing, make sure you can position both speakers evenly. Around 29 % of consumers consider this set-up essential.
Assessing the transfer Check that you can listen to both channels and monitor the recording level on the recording device; compare frequency figures only when they use the same reference level. If you want to spot and check issues with a transfer, being able to monitor the recording and both channels is important. Around 24 % of consumers focus on this.
Complete stereo system Check the number of units and the cables and connections needed for both channels in the specific listing. If you want to set up stereo without having to search for a second speaker later, check everything included in the package. Around 18 % of consumers make a complete stereo system their main concern.

Common buying and connection mistakes

  • Confusing a speaker’s USB-C port with a recording input

    A speaker may play audio from a computer without recording the cassette deck’s analogue signal.

    Before you buy, map out the route from the deck to the recording device, and the separate route from the playback output to the monitors.

    Depending on the recording equipment you already have, you may need a suitable audio interface and the right cables.

  • Assuming a single monitor is a stereo pair

    One monitor isn’t enough for stereo. Genelec lists the 8010A as one unit per pack, while Yamaha describes the HS4 as a pair.

    Check the number of units in the specific listing and make sure you have everything you need for stereo.

    To create a stereo system with a single 8010A, you’ll need a second unit and possibly extra connections.

  • Comparing low-frequency limits without checking the measurement reference

    Manufacturers may state frequency limits using different level references. A single figure therefore isn’t enough to rank monitors for assessing your cassettes.

    Read frequency figures alongside their respective dB values, and take the positioning at your listening spot into account.

Key brands at a glance

ADAM Audio

ADAM Audio describes the D3V as a compact desktop stereo system with USB-C playback or two balanced analogue TRS inputs.

  • Detachable stands and adjustment switches are useful for a desktop set-up.
  • USB-C on the speaker doesn’t replace a recording input for your cassette deck; also check whether you can position the speakers for listening while standing.

Yamaha

Yamaha’s HS3 and HS4 ranges include compact active speaker pairs with analogue RCA, stereo mini-jack and XLR/TRS connections.

  • For the HS4, Yamaha specifies a pair, a connection cable, a headphone socket and ROOM CONTROL.
  • The HS4 isn’t listed as having a USB-C audio input. The manufacturer’s claims about faithful sound reproduction aren’t independent measurements taken at a standing desk.

Kali Audio

Kali Audio describes the LP-UNF as a desktop monitor pair with USB-C, TRS and RCA playback inputs.

  • The manufacturer specifies settings for different desk positions.
  • The manufacturer’s claims about stereo imaging and desk positioning don’t show how the system will sound at every standing listening position.

Genelec

The Genelec 8010A is a compact active single monitor with an analogue XLR input and a specified cabinet width of 121 mm.

  • Its specified narrow width may be useful when desk space is limited.
  • Genelec says the package contains one monitor. You’ll need two units for stereo and a suitable analogue playback output.

Edifier

The MR4 has TRS and RCA/AUX inputs, as well as a headphone output on the front, according to Edifier.

  • Switchable listening modes offer different settings for different uses.
  • The manufacturer’s description of the Monitor mode’s tuning isn’t independent proof of neutrality. Check which mode you’ve selected before assessing a transfer.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I connect the cassette deck directly to a studio monitor’s USB-C input?

No. A USB-C port used as a monitor’s playback input doesn’t replace a recording input. For a deck with a line output, you’ll need a suitable line input on your computer or audio interface; connect the monitors to the appropriate playback output.

What should I check before transferring a cassette over a long period?

Check the playback device and recording level, and save an unprocessed recording. The Audacity Manual also identifies the condition of the tape head and azimuth as possible factors affecting cassette transfers; these steps don’t require a particular monitor model.

What warranty rights apply if a product is faulty in Germany?

According to EU consumer information, you have statutory rights against the seller for at least two years from the date you receive the goods. An additional manufacturer’s guarantee must not limit these rights; the rules described there don’t apply to purchases from private individuals.

What should I look for in an electric monitor sold in Germany?

The Bundesnetzagentur includes correct CE marking, manufacturer details and German instructions with the required warnings among the criteria it checks when monitoring the market. This doesn’t confirm that a particular model or listing complies in every respect; check its specific labelling and documentation.

Can I digitise a music cassette for personal use and share the file?

Under certain conditions, § 53 UrhG allows individuals to make individual copies for private use, in particular not for commercial purposes and not from an obviously unlawful source. The provision doesn’t allow such copies to be distributed or played in public; it doesn’t automatically permit other types of use.