Which monitoring solutions are right for you?

Editors of choir recordings

If you compare unedited and edited sections at the same listening spot, keeping your setup consistent makes it easier to assess changes to the voices and room sound. Audacity also recommends listening to the removed residual signal when using noise reduction.

Editors with limited desk space

If you need to fit two speakers beside your screen, consider their dimensions, how they’ll sit in relation to your listening spot and whether the connections are suitable. A compact pair and two separate nearfield monitors also differ in the extra equipment and cables needed to complete a stereo system.

Editors in homes where sound carries

If your speakers might disturb other people, make sure you can switch to headphones with your existing audio source or chosen system. Quiet hours may be governed by state law, local rules and house rules; the German Environment Agency points out that these different levels of regulation apply.

What should you look for when choosing?

Start by planning your listening spot and measuring the space available. Then check that the connections and number of units match your audio source, and consider when you’ll be able to use speakers in your home.

Consideration What to check when buying Who is it most important for?
Assessing voices and editing A stereo setup that is as symmetrical as possible at your regular listening spot; compare the original, edited version and, when using noise reduction, the residual signal too. If I want to assess changes to voices or the sound of a recording with confidence, I’ll keep my listening spot and setup as consistent as possible. Around 33% of consumers put assessing choir edits first.
Space and room positioning Measure the space available for both speakers and your listening spot; use adjustment profiles only when they suit the actual desk or wall position. If my desk is short on space, I want to position both speakers so I can work in stereo effectively from my listening spot. Around 27% of consumers prioritise space and positioning.
Being considerate and switching to headphones Check house rules and local requirements; find out whether your audio source or system has a suitable headphone option. If noise could disturb the people I live with, I want to be able to carry on working without speakers when needed. Around 20% of consumers prioritise being considerate and switching to headphones.
Connections and a complete stereo system Check the items included for sale against your audio outputs, cables and the power connections needed for both speakers. If I want to keep using my existing setup, the connections and number of included units need to be compatible. Around 20% of consumers focus on connections and having a complete stereo system.

Common buying mistakes

  • Assuming one monitor is a complete stereo system

    Yamaha lists the HS5 as a single unit and the HS3 as a pair; KRK also lists the ROKIT 5 Generation Five as a single monitor. You may therefore need a second unit and extra cables for stereo.

    Before buying, check how many units are included and allow for the connections and power supply needed on both sides.

    A second unit may need extra space, additional cables and another power socket.

  • Comparing frequency limits measured on different scales

    ADAM Audio gives the T5V’s lower limit at −6 dB; Yamaha lists the HS5’s figures at −3 and −10 dB. These figures alone don’t establish which will perform better at your listening spot.

    Only compare figures defined on the same basis, and take the actual positioning in your room into account.

  • Assuming room adjustment can make up for poor positioning

    Genelec notes that room boundaries, reflections and speaker position all affect what you hear. Adjustment profiles don’t prove that they can compensate for the conditions in a particular room.

    Plan your listening spot and position the speakers as symmetrically as possible first. Then choose profiles to suit their actual location.

  • Assuming USB-C plays every source file unchanged

    ADAM Audio specifies 48 kHz/16 bit for the D3V’s internal processing over USB. So a USB-C connection alone doesn’t mean higher-resolution files will play in their original format.

    If your workflow relies on a particular playback resolution, check the documented signal path for the specific model.

Brands to consider

ADAM Audio

The D3V is a compact desktop pair; the T5V is a separate active 5-inch nearfield model.

  • According to ADAM Audio, the D3V offers USB-C, balanced TRS inputs, stands and positioning adjustment options.
  • The manufacturer specifies 48 kHz/16 bit for the D3V’s internal USB operation. The T5V has a rear-facing bass reflex port; this doesn’t demonstrate that it has a sound advantage for choir recordings.

Yamaha

According to Yamaha’s German-language spec sheet, the HS3 is an analogue pair, while the HS5 is listed as a single monitor.

  • Both the HS3 and HS5 have room adjustment switches. The HS3 also has a headphone output.
  • The HS3 is not listed as having a USB audio input. Yamaha specifies frequency response figures at −3 and −10 dB; they can’t be compared with other models unless the measurement basis is the same.

Kali Audio

The LP-UNF is a desktop stereo pair designed for different desk and wall positions, with USB-C or analogue playback.

  • Kali Audio documents different positioning profiles and input types for the LP-UNF.
  • Claims about precision come from the manufacturer. The manufacturer’s and German retailer’s figures for the lower frequency limit at ±3 dB differ, so this figure isn’t a reason to choose it over another model here.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo pair with a front-mounted headphone connection.

  • According to PreSonus, it comes with balanced TRS, RCA and stereo mini-jack inputs, as well as a headphone output.
  • This model is not listed as having a USB-C playback input. Describing it as particularly detailed is a manufacturer claim, not an independent comparative test.

KRK

The ROKIT 5 Generation Five is sold as a single 5-inch monitor, so you’ll need to plan your stereo setup separately.

  • KRK lists Mix, Focus and Create modes, plus 25 combinations of positioning and sound settings.
  • You’ll need to plan for two individual units to create a stereo system. The available settings don’t prove that they can fix room issues in a particular space.

Products for you on Joybuy

Related products will be available soon.

Frequently asked questions

Can studio monitors remove noise from a choir recording?

No. Studio monitors play back the edited signal, but they don’t remove noise themselves. Audacity describes noise reduction as an editing step and recommends listening to the removed residual signal too, so you can judge whether it has affected the sound you want to keep.

How should I position a stereo pair if I have enough space?

Position both monitors as symmetrically as possible around a fixed listening spot, and set them at the same height. Genelec recommends an equilateral stereo triangle where possible; check what you can achieve in your own room.

Does USB-C on the D3V replace an audio interface for recording and playback?

According to the manufacturer, USB-C on the ADAM Audio D3V lets you play audio directly from a computer without an additional interface for that playback route. This doesn’t mean it has a microphone input for choir recordings; ADAM Audio specifies 48 kHz/16 bit for internal USB operation.

Is there a set nationwide quiet period for using studio monitors in a student bedroom?

The German Environment Agency’s guidance doesn’t establish one set time for this kind of use. For neighbour noise caused by people’s activities, the agency refers to state law, local rules and house rules. So check the rules for your accommodation; restrictions on certain outdoor equipment don’t automatically apply to studio monitors.

What should I check to make sure electrical monitors comply with German requirements?

The Federal Network Agency lists a correctly applied CE mark, product identification, manufacturer details, instructions and safety warnings in German, and a declaration of conformity among the points checked during its market surveillance. A CE mark isn’t an independent sound test carried out by the agency; you’ll need to check the actual markings on the product in question.