Dialogue editors with limited sockets
You check edited speech at a fixed desk and want to find out how many mains sockets the speaker pair needs before you buy.
If you only have one free mains socket for your speakers, a compact stereo pair could be a good option. One speaker powers the pair, with a cable connecting the second speaker. Then choose according to your computer or interface’s audio outputs, and whether both speakers can be positioned sensibly. A monitor won’t remove noise: compare the original and edited versions from the same listening position, and listen out for any loss of speech.
You check edited speech at a fixed desk and want to find out how many mains sockets the speaker pair needs before you buy.
You want to set up two monitoring channels on a limited desk space, and need to plan for your listening position, connections and cables.
You’re considering adding a passive monitor for cross-checking, and can factor an amplifier and its power supply into your existing setup.
A good fit if: You want to check both stereo channels at your desk and have a socket available to power the pair.
The trade-off: A connecting cable between the speakers may limit how freely you can position them. Also check the inputs and power supply for the specific model.
A good fit if: You have two power sockets available and can position each monitor separately and connect it to an analogue output.
The trade-off: For stereo, you’ll need to plan for two units, suitable signal outputs and power for both monitors.
A good fit if: You already have a suitable amplifier and want to assess an additional listening option, such as for playback on devices with limited bass.
The trade-off: The speaker itself doesn’t need a mains socket, but the external amplifier does. A single reference monitor isn’t a substitute for a complete stereo pair.
| What matters | What to check before buying | Who will find this important? |
|---|---|---|
| Sockets and power supply | Check how the complete stereo system is powered, along with the power supply, connecting cable and, where relevant, amplifier. | If I only have a few free sockets, I want to know the power requirements for both channels. Around 29% of consumers prioritise powering the complete system. |
| Checking speech and artefacts | Compare the original and edited versions from your intended listening position; if possible, also listen to the removed signal. | If I need to check for residual noise, lost speech and editing artefacts, a suitable listening position matters. Around 29% of consumers prioritise monitoring speech processing. |
| Desk space and listening position | Check the dimensions of both speakers and allow room for cables. Position them so they’re both aimed as similarly as possible towards your listening position. | At a small editing station, I need to know whether there’s enough space to position both monitors sensibly. Around 24% of consumers prioritise the space available. |
| Signal path and what’s included | Check that your computer or interface outputs match the model’s inputs, and whether the offer is for a single unit or a pair. | If I want to keep using my existing audio equipment, compatible connections and what’s included are crucial. Around 18% of consumers prioritise this compatibility. |
Genelec lists the 8010A as a single monitor; Yamaha also specifies that the HS5 is sold individually. So, for stereo, you’ll need to plan for two units and their power supply.
You’ll also need suitable signal cables and an additional power socket.
Before you buy, check what’s included and how both channels are powered, rather than looking only at the details for one speaker.
A passive speaker has no built-in power amplifier. The external amplifier still needs power.
Make room in your plans for a compatible amplifier, including space for it and a power supply.
A passive reference monitor is a natural addition if you already have a suitable amplifier.
Your listening experience also depends on the room and speaker placement. Excessive noise reduction can also affect speech or create artefacts.
Compare the original and edited versions from your intended listening position, rather than basing your decision on a single technical specification.
The D3V is a compact desktop stereo system for computer or analogue playback.
The Eris 3.5 2nd Gen is a compact monitor pair for your desk, with analogue connections.
The HS3 is sold as a compact pair, while the HS5 is an active nearfield monitor sold individually.
The 8010A is a compact active monitor sold individually, with an XLR input.
The Mixcube Passive is a passive reference monitor; the Mixcube Active is offered as a separate active alternative.
No. Noise reduction is done during audio editing; monitors are used to check the result. The Audacity manual recommends listening to the removed signal to check that wanted audio hasn’t been removed by mistake, and warns that excessive reduction can create audible artefacts.
Aim both towards the same listening position, keeping their distance and height as similar as possible. Genelec notes that room reflections and speaker placement affect what you hear at your listening position; this doesn’t guarantee a particular result from any one model.
Only for the speaker itself: the passive Avantone Mixcube connects via speaker terminals and needs a suitable external amplifier. Make sure you include the amplifier’s power supply when planning your whole setup.
This isn’t a universally suitable solution. ELEKTRO+ recommends connecting no more than one multi-way adaptor to each socket. Follow this safety advice, and don’t plan your power supply based only on the number of available sockets.