Which studio monitors are right for you?

Dialogue editors focused on detail

After noise reduction, you check whether speech is still clear and whether quiet passages or processing artefacts stand out. A consistent listening position and a signal path you can check matter more than an impressive frequency figure alone. The European Broadcasting Union explains that speech intelligibility depends on several factors, while Genelec outlines the importance of stereo positioning.

Editors with a small desk

You need two speakers that can be positioned sensibly either side of your screen, so you’ll need to choose between a compact pair and two individually sold nearfield monitors. Genelec, ADAM Audio and Kali Audio describe the different sizes, connections and placement options available with their models.

Home editors who listen at low volumes

You work at low volume in a quiet room, so audible self-noise and interference from your source or cables are particularly relevant at your actual listening position. Genelec notes that self-noise can be audible at close range in a very quiet room.

What matters when checking dialogue?

First, check that both speakers can be positioned sensibly at your listening position and connected to your source. Then assess quiet speech and unwanted noise in the conditions you actually work in.

What you need What to look for when buying Who should pay particular attention?
Quiet speech details Keep the volume consistent when comparing before and after; check quiet passages and possible processing artefacts at your usual listening position. If I want to compare quiet speech after noise reduction, I need a consistent listening position and a steady monitoring volume. Around 33% of consumers prioritise checking quiet speech details.
Desk placement Allow enough space and height for both speakers; check their orientation and how close they’ll be to the desk and walls from your listening position. At a small desk, I need to position both speakers appropriately for my listening position; compact dimensions alone don’t solve the placement challenge. Around 27% of consumers prioritise space and positioning.
Self-noise Check the source, connection and speakers separately during signal pauses, from your usual seating position and at your usual volume. During quiet passages in a silent room, I want to be able to distinguish noise from the source from unwanted sounds at my listening position. Around 20% of consumers prioritise audible noise.
Connections and what’s included Match your source’s outputs to the inputs on the specific version you’re considering; check how many monitors are included and which cables you’ll need. I want to make sure I can connect my audio source and that the package includes the speakers I need. Around 20% of consumers prioritise connections and what’s included.

Common buying misconceptions

  • Confusing a single monitor with a stereo pair

    Yamaha lists the HS5 and Genelec the 8010A as individual monitors, while ADAM Audio describes the D3V as a pair. The number included affects whether you’ll need to buy another monitor for stereo.

    Before buying, check the specific version, how many monitors are included and what connections you’ll need.

    Optional calibration may require additional compatible components.

  • Blaming audible hiss solely on the speaker

    In a very quiet room, you may notice both self-noise from an active monitor and noise from the audio source.

    Check the source, connection and speakers separately from your usual listening distance and at your usual monitoring volume.

A guide to relevant brands

ADAM Audio

The D3V is a compact desktop pair; the T5V and T7V are nearfield options that you’ll need to buy individually.

  • ADAM Audio lists USB-C and balanced TRS inputs for the D3V. In USB mode, its internal DSP operates at 48 kHz/16 bit, according to the manufacturer.
  • The T5V and T7V have rear bass-reflex ports. Check how they’ll fit on your desk rather than judging their suitability by cabinet size alone.

Yamaha

The HS5 is a single active nearfield monitor for a workspace with suitable analogue outputs.

  • Yamaha lists XLR and TRS inputs, along with ROOM CONTROL and HIGH TRIM adjustment options.
  • The HS5 is sold as a single monitor. Check what’s included with the specific version if you’re planning a stereo system.

Genelec

The 8010A is a particularly compact, single active monitor for use with a suitable analogue XLR signal path.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod, and an XLR input.
  • According to Genelec, each package contains one monitor. Its quoted lower frequency limit of 67 Hz at −6 dB doesn’t, by itself, describe bass response at your individual listening position.

Neumann

The KH 80 DSP is an option for a fixed nearfield listening position where placement adjustments or optional calibration may be useful.

  • Neumann describes an adjustment on the monitor for adapting it to its placement, as well as optional calibration with MA 1.
  • Optional calibration is not the same as using the switch on the monitor. Adjustment options alone don’t prove that dialogue artefacts will be easier to identify.

Kali Audio

The LP-UNF is a desktop stereo system with digital and analogue inputs, designed for a limited workspace.

  • Kali Audio lists USB-C, RCA and balanced TRS inputs, as well as settings for different desk and wall positions.
  • The quoted frequency limits refer to different dB conditions and don’t guarantee how the system will sound at your individual listening position.

KRK

The ROKIT 5 Generation Five is a single active monitor with selectable listening profiles.

  • KRK lists Mix, Focus and Create modes, as well as EQ settings for room adjustment.
  • The manufacturer’s claims about Focus mode aren’t independent evidence that it helps you assess dialogue artefacts more reliably.

Joybuy products for this use

Related products coming soon.

Frequently asked questions

How should I position two monitors for repeatable before-and-after comparisons?

Angle both monitors towards your listening position, keeping their height and distance as symmetrical as possible. Genelec recommends an ideal stereo angle of 60° at the listening position. Compare processed and unprocessed passages without changing the volume, and be aware of the effect of desks and walls.

Does a faint hiss in a quiet home office always mean there’s a fault?

No. Genelec explains that self-noise from active speakers can be audible at close range in very quiet rooms; the audio source may also produce noise. Check each part of the signal path rather than assuming the sound is coming from a particular monitor.

Can a studio monitor measure the loudness of my dialogue file?

No. The ITU-R BS.1770-5 standard describes methods for measuring programme loudness and true peak. Speakers let you assess sound acoustically, but they don’t replace the relevant measurement tool.

Who’s responsible if there’s a fault: the retailer or the manufacturer’s warranty?

According to information from the European Union, consumer purchases come with a legal minimum guarantee of two years from the date you receive the goods, provided by the seller. A voluntary manufacturer’s warranty may offer additional benefits, but it doesn’t replace these rights; check its specific terms separately.