Who is this selection for?

Drum editors working with stereo tracks

If you want to assess hits and changes across recorded tracks, you’ll need a well-positioned stereo monitoring setup. Avid explains how audio software can detect transients such as drum hits; speakers don’t replace checking edits in the software. Genelec offers guidance on stereo speaker placement.

Editors with a small desk

You’ll need to fit two speakers beside your screen and connect their inputs to your existing signal chain. A compact desktop pair and two individual nearfield monitors differ in several ways, including placement and connections. Genelec offers positioning advice, while ADAM Audio and Kali Audio outline connection and placement options.

Editors focused on kick drum

If you want to assess the low frequencies in a drum recording, consider your room and listening position as well as the manufacturer’s specifications. Genelec explains how the room can affect what you hear at your listening position; Yamaha and ADAM Audio publish frequency specifications for their respective models.

What should you consider when buying?

First, check that your desk has room for two speakers and the connections they need. Then compare your signal chain and bass requirements with the specifications for the models you’re considering.

Consideration What to check before buying Who is it most relevant to?
Hits and stereo Check whether you’re buying a pair or two individual units, and whether you can position both towards your listening position. Genelec recommends a 60° angle between the monitors for stereo. If I want to assess edits and hits in both channels, I need a suitable stereo setup. Around 29% of consumers prioritise hits and stereo changes.
Low kick drum frequencies Yamaha specifies 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5. ADAM Audio specifies bass extension down to 39 Hz for the T7V; this figure isn’t directly comparable with the Yamaha measurements. Genelec points out that the room and listening position affect what you hear. If you want to judge low drum frequencies as reliably as possible at your listening position, consider the frequency specifications alongside the room. Around 22% of consumers prioritise assessing kick drum bass.
Space and positioning Measure the width and depth available for both speakers, and check their position in relation to your screen, walls and seat. Kali Audio describes settings for different desk positions on the LP-UNF. If my desk has little spare space, I still need to position two monitors properly for my listening position. Around 21% of consumers prioritise limited desk space.
Compatible signal chain Match the outputs on your computer or audio interface to the inputs on the specific model. ADAM Audio lists USB-C and TRS for the D3V; Yamaha lists XLR and TRS for the HS5. I want to connect the monitors to my existing equipment without needing extra, incompatible connections. Around 14% of consumers prioritise connection compatibility.
Complete stereo system Check the number of units, the cables you’ll need and, where relevant, the requirements for a calibration workflow. Yamaha lists the HS5 as a single unit; ADAM Audio describes the D3V as a pair. Neumann specifies additional equipment for MA 1. If you want to plan for all the equipment and connections you’ll need before buying, check the package contents and setup requirements together. Around 14% of consumers prioritise buying a complete system.

Avoiding common buying pitfalls

  • Confusing a single monitor with a stereo pair

    The Yamaha HS5 is listed as a single monitor, while ADAM Audio describes the D3V as a pair. One unit won’t play both stereo channels through two speakers.

    Only compare offers once you’ve checked the number of units, what’s included and which connections you’ll need.

    For a stereo system made up of monitors sold individually, you’ll need two units and, where necessary, suitable connection cables.

  • Comparing frequency specifications without checking how they were measured

    Yamaha gives different lower frequency limits for the HS5 at −3 dB and −10 dB. Your room also affects what you hear at your listening position, so a single manufacturer specification can’t guarantee that you’ll be able to judge bass reliably at your desk.

    Check frequency specifications alongside their dB reference, and take your room, speaker placement and listening position into account.

  • Relying on controls or calibration instead of getting the positioning right

    Speaker placement and your listening position affect what you hear. Neumann’s MA-1 workflow requires additional equipment and doesn’t replace careful positioning.

    Plan where both monitors will go first, then check the settings and calibration requirements for your chosen model.

    For the MA-1 workflow, Neumann specifies, among other things, a measurement microphone, a suitable computer and an audio interface with a microphone input and phantom power.

Key brands at a glance

ADAM Audio

The D3V is a compact desktop stereo pair, while the T7V is a larger individual nearfield monitor, offering a different balance of space and bass performance.

  • ADAM Audio says the D3V system includes two speakers and connection accessories.
  • The T7V has a rear-facing bass reflex port. A manufacturer’s low-frequency specification doesn’t show how accurately the bass will sound in your room.

Yamaha

The HS5 is an individual active nearfield monitor for an analogue stereo monitoring setup.

  • Yamaha lists XLR and TRS inputs, Room Control, and separate frequency specifications at −3 dB and −10 dB.
  • The HS5 is sold individually. You’ll need two units for a stereo pair.

Kali Audio

The LP-UNF is a desktop system designed for different positions on or behind your desk.

  • Kali Audio lists USB-C, TRS and RCA connections, as well as settings for different placements.
  • A manufacturer’s sound quality claims aren’t an independent assessment of how the speakers perform in your workspace; the room still matters.

PreSonus

The Eris Studio 5 is an active nearfield monitor sold individually, with analogue inputs and placement controls.

  • PreSonus lists XLR, TRS and RCA connections, as well as Acoustic-Space settings.
  • You’ll need two individual units for stereo. The manufacturer’s claim of linear sound reproduction isn’t proof of how the monitor will perform in your room.

Neumann

The KH 120 II is a nearfield option for buyers considering a calibration workflow with MA-1.

  • Neumann lists DSP and compatibility with MA 1.
  • According to Neumann, the MA-1 workflow requires additional equipment. Make sure you can meet these requirements; calibration doesn’t replace checking the speaker placement.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Is one monitor sold individually enough to assess a stereo recording?

No. If you want to assess both stereo channels through speakers, you should plan for two suitably positioned units. Yamaha lists the HS5 as a single unit; ADAM Audio describes the D3V as a pair.

How should I position studio monitors on my desk?

Point both speakers towards your listening position. Genelec recommends a 60° angle between the monitors for stereo, with the setup as symmetrical as possible. Then check how your desk and walls affect what you hear from your seat.

Does the Neumann KH 120 II need additional equipment for MA 1?

Yes. For the MA-1 workflow, Neumann specifies, among other things, a measurement microphone, a suitable computer and an audio interface with a microphone input and phantom power. These requirements apply to the MA-1 workflow, not to every studio monitor.

What are your rights if a product develops a fault after purchase in Germany?

According to Verbraucherzentrale, consumers buying new goods can generally exercise their statutory warranty rights with the seller within two years of receiving the goods. This is separate from a voluntary guarantee; the terms of the specific purchase should be checked.

Can old active studio monitors be put in household waste?

No. Section 10 of the ElektroG requires electrical and electronic waste to be collected separately from unsorted household waste. The Umweltbundesamt lists recycling centres and suitable retailer take-back points, among other options.