Who this monitoring setup is for

Comparing levels at a dual-screen desk

If you regularly compare recordings, a consistent listening level and separate programme loudness measurement will help. ITU-R BS.1770-5 describes algorithms for programme loudness and True Peak.

Producers short on desk space

If there’s little room alongside two displays, plan the footprint and symmetrical positioning of the stereo pair together. Genelec describes aiming monitors towards the listening position as part of monitor placement; Yamaha HS3 and ADAM Audio D3V are specified as pairs.

Mixers working in a challenging room

If your desk and room affect your listening conditions, positioning and model-specific adjustment options matter. Neumann describes the KH 80 DSP as having a switch for basic adjustment to different placement positions.

What to consider when buying

Start by checking whether you can position two speakers symmetrically alongside your displays and connect them to your audio source. Then weigh up the space they’ll need and any room adjustment options available for the model.

The percentages are broad estimates for the buying priorities described here.

Buying priority What to check before buying Who is this especially important for?
Comparable levels Plan for a repeatable volume setting and a suitable loudness measurement method for numerical comparisons. If I want to compare recordings fairly, I keep the listening level constant and supplement what I hear with measurements. Around 33% of consumers put comparable levels and listening conditions first.
Space for stereo Check for clear space alongside the displays, as well as equal height and, where possible, symmetrical distances from your seat. If I have two screens on my desk, I need enough room for two suitably positioned speakers. This applies to around 27% of consumers who prioritise available space.
Connections and what’s included Check the quantity, inputs and required connection cables against your existing audio source. If I want to set up a complete stereo system, the connection type and what’s included need to suit my audio equipment. Around 20% of consumers prioritise connections and what’s included.
Room acoustics Check the placement or EQ settings specified for the particular model, and plan where to position the speakers. If my desk or room affects playback, I want to know which adjustments the particular model offers and what they can do. Around 20% of consumers make room adjustment their main priority.

Common buying misconceptions

  • Confusing a single active monitor with a complete stereo system

    Depending on the manufacturer, models are sold either as a pair or individually. A single monitor doesn’t make a stereo pair.

    Check the quantity and connections for both stereo channels in the specific listing.

    If a monitor is sold individually, you’ll need a second speaker and suitable connection cables for stereo.

  • Treating speaker specifications as a substitute for loudness measurement

    Sound reproduction and measuring programme loudness or True Peak are different tasks.

    Use a suitable loudness measurement method for numerical comparisons, and keep your monitoring settings unchanged when switching between recordings.

  • Making room for the screens but not for stereo

    Displays, monitor stands and asymmetrical positioning can affect what you hear at your listening position. Genelec recommends aiming the speakers towards the listening position.

    Before buying, measure the displays, speakers and listening position together, and check whether a symmetrical arrangement is possible.

    Depending on your workspace, you may need additional stands or to rearrange your desk.

  • Comparing bass specifications for different models without a common measurement basis

    For the HS3, Yamaha specifies different lower frequency limits at −3 dB and −10 dB. This figure alone doesn’t tell you how the bass will sound at your listening position.

    Only compare frequency specifications when they’re based on the same measurement method, and take speaker placement in your actual listening position into account.

Brands and model ranges to consider

Yamaha

Specified as a pair, the HS3 may suit compact workspaces where analogue inputs are needed.

  • Yamaha lists combo, RCA and stereo mini inputs, as well as ROOM CONTROL, for the HS3.
  • The manufacturer’s frequency response specifications distinguish between −3 dB and −10 dB; they don’t, on their own, tell you how the bass will sound on your desk.

ADAM Audio

The D3V is designed for compact desktop workspaces, while the T Series includes active nearfield monitors for different footprints and connection setups.

  • ADAM lists USB-C, balanced TRS inputs and detachable stands for the D3V.
  • ADAM specifies rear bass-reflex ports for the T Series. D3V features don’t automatically apply to the T5V or T7V.

Kali Audio

According to the manufacturer, the LP-UNF is designed for mixing right at your desk and for different positions on or behind it.

  • Kali describes placement settings for different desk and wall positions, as well as a front-facing bass-reflex port.
  • These settings don’t remove the need to check speaker positioning at your own listening position.

Neumann

The KH 80 DSP is a compact active nearfield monitor with model-specific options for adjusting to its placement.

  • Neumann describes a rear switch for basic adjustment to free-standing placement or desks of different sizes.
  • This feature doesn’t mean that every awkward position or room can be fully corrected.

KRK

The ROKIT 5 Generation Five is worth considering if you’re looking for an active 5-inch monitor with selectable playback modes and EQ settings.

  • KRK lists Mix, Focus and Create modes, along with 25 Boundary/EQ combinations.
  • KRK specifies the model as a single monitor; for repeatable comparisons, keep your chosen settings the same.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I match recording levels using studio monitors alone?

You can listen to recordings through the same monitors with the settings kept consistent; for a numerical comparison of programme loudness, you’ll also need a measurement method. ITU-R BS.1770-5 describes algorithms for loudness and True Peak. The EBU recommendation of −23 LUFS is for broadcasting and isn’t a general target for every recording.

How should I position a stereo pair next to two screens?

Where possible, position your seat on the axis of symmetry, place both speakers at the same height and aim them towards your listening position. For stereo, Genelec describes a 60° angle between the left and right monitors as ideal. Check whether you can achieve this arrangement with your displays and available space.

Do I need to order two speakers?

For stereo, you need two channels and the corresponding speakers. Yamaha specifies the HS3 as a pair and ADAM Audio specifies the D3V as a pair; KRK lists the ROKIT 5 Generation Five as a single monitor. What’s included in the specific listing is what matters.

What are my rights when buying online or if a product is faulty?

According to European Union consumer information, when you buy at a distance from a trader, you generally have 14 days from delivery to cancel your purchase; exceptions and conditions regarding return costs may apply. Under EU consumer rules, faulty goods are covered by a minimum two-year legal guarantee from the seller. This is separate from any additional manufacturer’s guarantee.

What should I look for in the labelling on electric studio monitors?

Germany’s Federal Network Agency explains that products covered by relevant EU harmonisation legislation must carry CE marking. Check the labelling and product information for the specific device; the CE mark isn’t an independent assessment of audio performance.