Who is this guide for?

Editors working with electric bass and focused on low frequencies

If you edit electric bass tracks, you’ll need to decide whether the documented low-frequency range is suitable for your work. Manufacturers state frequency limits using different level references.

Bass editors working in challenging rooms

At a fixed workstation, the room and speaker positioning affect how you perceive bass. Genelec points out that room acoustics influence what you hear, so positioning and, where appropriate, acoustic treatment should be part of your plan.

Bass editors with limited desk space

If there’s little room beside your screen, check the stereo setup and the connections for your computer or audio interface together. A compact desktop system and two separate nearfield monitors have different space requirements.

What should you look for when buying?

Two separate active nearfield monitors

A good choice if: you can position two speakers at your listening position and compare the bass range and inputs of a specific model.

Bear in mind: Published frequency limits don’t always use the same level reference, and a single monitor isn’t automatically a stereo pair.

Compact desktop stereo system

A good choice if: desk space and a direct computer connection are important. Kali describes the LP-UNF as suitable for different desk positions and lists USB-C; ADAM Audio lists USB-C and balanced TRS inputs for the D3V.

Bear in mind: A compact design and documented bass range don’t eliminate the effects of your desk and room.

Nearfield monitors with room correction

A good choice if: you have a fixed listening position and want to set up room correction; the KH 120 II can be calibrated using MA 1.

Bear in mind: Neumann recommends a listening distance of 1 to 2 metres for the KH 120 II. According to Genelec, room correction won’t automatically solve every acoustic problem in a room.

Monitors paired with a subwoofer

A good choice if: you need to assess low frequencies in greater detail and have space to position and calibrate a subwoofer.

Bear in mind: The position, crossover frequency, level and phase need to work with your main system and room.

Priority What should you look for? Who is it most relevant to?
Low-frequency range Compare frequency specifications only when they use the same level reference; consider your intended listening position. If deep bass notes matter to my editing decisions, I want to understand the frequency specifications and their dB references. Around 26% of consumers say bass range is their main priority.
Room and positioning Check whether both speakers can be positioned sensibly and what adjustment options the model offers. At a fixed workstation, I want to know whether the room and speaker positions could make reliable monitoring more difficult. Around 26% of consumers put room and positioning at the heart of their choice.
Desk space Match the design and positioning options to the space available; check whether the listing is for a pair or a single unit. If there’s little room beside my screen, the system needs to fit into a practical stereo setup. Around 21% of consumers say available space is their most important buying consideration.
Connections Match your audio source’s outputs to the inputs on the specific model and allow for any cables you need. To connect my computer or audio interface, I want the right inputs without having to plan for unnecessary adaptors. Around 16% of consumers prioritise connection type.
Complete stereo setup Consider the number of units, the cables required and, if applicable, the extra space needed for a subwoofer. When putting together a complete monitoring setup, I want to know whether it includes all the speakers and connections I need. Around 11% of consumers prioritise having a complete setup.

Common buying and positioning mistakes

  • Comparing frequency limits without checking the dB reference

    A frequency specification can’t be compared directly with every other figure unless you know its level reference. ADAM Audio lists the T7V at 39 Hz at −6 dB; Yamaha lists the HS7 at 55 Hz at −3 dB and 43 Hz at −10 dB.

    Read the level reference alongside the frequency limit, and don’t assume that the lowest figure in hertz alone tells you how much bass you’ll hear at your listening position.

  • Assuming a subwoofer will automatically solve room problems

    The bass you hear at your listening position depends on the room and speaker placement. Adding a subwoofer also means you’ll need to integrate it with your main monitors.

    Plan the position, crossover frequency, level and phase as parts of one system. You’ll need extra time to position and calibrate it.

  • Assuming a single monitor is the same as a stereo pair

    Yamaha lists the HS7 as a single item. The price or contents of one unit therefore won’t automatically give you a stereo monitoring setup.

    Check the number of units before you buy, and allow for a second monitor and suitable connection cables if needed.

Brands to consider

ADAM Audio

The T7V and D3V offer different positioning options: a single active nearfield monitor and a compact desktop alternative.

  • ADAM Audio lists the T7V at 39 Hz at −6 dB, with a rear bass-reflex port. For the D3V, the manufacturer lists 45 Hz at −6 dB, USB-C and balanced TRS inputs.
  • These specifications describe the individual models, not how they’ll reproduce bass at a particular home-office listening position.

Yamaha

The HS series includes active nearfield monitors. The HS7 is one example, with frequency limits specified at different level references.

  • Yamaha lists the HS7 at 55 Hz at −3 dB, 43 Hz at −10 dB, with XLR and TRS inputs.
  • The German specification lists a single unit. You’ll therefore need to allow for two units for a stereo system.

Kali Audio

Kali describes the LP-UNF as a stereo option for your desk.

  • Kali lists USB-C, various positioning options and a frequency range of 54 Hz to 21 kHz at ±3 dB for the LP-UNF.
  • The frequency range specifications don’t show how the monitor will sound at a particular listening position.

Neumann

The KH 120 II is a nearfield monitor for buyers considering a setup with the MA 1 room correction system described by Neumann.

  • Neumann lists a range of 44 Hz to 21 kHz at ±3 dB and a recommended listening distance of 1 to 2 metres.
  • Room correction won’t automatically overcome the limitations of a room with acoustic problems.

Genelec

The compact 8030C is one possible single-monitor option. Genelec also publishes guidance on positioning and subwoofer integration.

  • Genelec’s guidance on positioning and room acoustics can help you plan your listening position.
  • General manufacturer guidance isn’t an independent assessment of the 8030C in a specific room.

Studio monitors at Joybuy

Suitable products coming soon.

Frequently asked questions

Is the lowest frequency in hertz enough to help me choose monitors for electric bass tracks?

No. Start by comparing the level references: ADAM Audio lists the T7V at 39 Hz at −6 dB, while Yamaha lists the HS7 at 55 Hz at −3 dB and 43 Hz at −10 dB. These figures alone still don’t tell you exactly what you’ll hear at your listening position.

How should I position studio monitors in a home office?

Choose a fixed listening position and, where possible, position both speakers in similar locations. Genelec points out that the room and speaker placement affect what you hear; Kali highlights how proximity to walls and your listening position can affect bass in particular. Assess the actual position in your room.

Do I need a subwoofer for electric bass tracks?

Not necessarily. If you use a subwoofer to assess low frequencies in greater detail, plan how you’ll integrate it with your main monitors. Genelec highlights position, crossover frequency, level and phase as important considerations.

Can I connect studio monitors directly to my computer?

That depends on the model and your computer. Kali lists USB-C for the LP-UNF, as does ADAM Audio for the D3V; Yamaha lists analogue XLR and TRS inputs for the HS7. Check the connections and cables you need before you buy.