Choose a stereo system that you can position as symmetrically as possible around your listening position and connect to your audio source. At a shared desk, switching to headphones should also be straightforward. A compact pair can make it easier to plan your desk space, while monitors sold individually offer different connection and positioning options. However, you can’t judge how well you’ll be able to assess the double bass in a mix from a frequency specification alone.
Who are the different monitor setups for?
Jazz mixers with limited desk space
You need two speakers that will fit alongside your screen and work essentials, and can be positioned as symmetrically as possible around your listening position. Genelec recommends aiming both monitors towards your listening position.
Mixers at a shared workstation
You want to be able to switch from speakers to headphones when needed, without everyone else at the desk having to listen in. Yamaha and PreSonus list a headphone output on their respective paired systems.
Mixers focused on the double bass
You want to assess the low frequencies, while remembering that frequency specifications don’t automatically tell you what you’ll hear at your own listening position. Genelec notes that the room and monitor positioning affect the sound.
What should you look for when buying?
Compact desktop stereo pair
A good fit if: you have limited space and need a pair with easily accessible volume or headphone controls. Yamaha and PreSonus describe their respective systems as pairs.
Consider: Both speakers need to fit around your screen and other work essentials, and be positioned as symmetrically as possible. Manufacturers’ frequency specifications don’t tell you how the bass will sound at your particular listening position.
Two compact nearfield monitors sold individually
A good fit if: your setup can accommodate two separate active monitors, along with suitable signal outputs and power connections. Genelec lists an analogue XLR input for the 8010A.
Consider: For stereo, you’ll need to plan for two Genelec 8010A monitors, as Genelec specifies one monitor per package.
Larger monitor or DSP-assisted positioning
A good fit if: you have room for two units and can make use of the documented positioning options. ADAM Audio lists a 5-inch woofer for the T5V, while Neumann describes a switch on the KH 80 DSP for different desktop placements.
Consider: Rear connections and bass ports need to suit your actual setup. An optional calibration solution doesn’t guarantee that room or desk conditions will be fully corrected.
| What matters |
What to look for when buying |
Who it matters most to |
| Desk space and stereo imaging |
Check the width and depth, including connections. Position both monitors at the same height and as symmetrically as possible around your listening position. Genelec recommends an equilateral listening triangle. |
If my shared desk also has a screen and work essentials on it, I still want to be able to create a well-balanced stereo image. Around 31% of consumers would prioritise this in that situation. |
| Switching to headphones and being considerate |
Check where the volume control and headphone socket are, and whether the signal path is compatible with your existing audio source. Yamaha and PreSonus list a headphone output on their respective models. |
If other people are using the workstation at the same time, I need a practical way to switch to headphones. Around 25% of consumers would prioritise being considerate and having this alternative listening option. |
| Assessing low frequencies |
Check the frequency figures and their dB reference, and take your setup and listening position into account. Genelec describes how monitor positioning affects playback. |
If the double bass is crucial to my jazz mix, I want to assess the low frequencies at my own listening position rather than just compare figures on a spec sheet. Around 25% of consumers would have this as their main priority. |
| Connections and what’s included |
Match your audio source’s outputs to the monitor inputs, and check the quantity, connection cables and power connections included with the specific offer. Yamaha describes the HS3 package as a pair; Genelec lists one monitor per package for the 8010A. |
If I want to work without finding that I’m missing a second speaker or have the wrong cables, the entire signal path needs to be right. Around 19% of consumers would put connections and what’s included first. |
Avoid common buying mistakes
-
Confusing a single monitor with a stereo pair
Genelec lists the 8010A as a single monitor, while Yamaha describes the HS3 package as a pair. The quantity determines whether the offer already includes both sides of a stereo system.
Before buying, check the quantity and what’s included in the specific variant. If you’re buying a single monitor, remember to plan for a second speaker and suitable signal connections.
-
Comparing frequency limits without checking their measurement reference
Yamaha lists 70 Hz at −10 dB for the HS3, while Genelec lists 67 Hz at −6 dB for the 8010A. As the dB references differ, these figures don’t provide a simple way to rank how well you can assess the double bass.
Check the dB reference for each figure and take your room and listening position into account, rather than comparing only the lowest frequency number.
-
Checking only the cabinet width, not how you’ll position the monitors
Your desk, walls and an asymmetrical setup can affect the stereo image and the frequency response you hear. The ADAM Audio T5V also has a rear-facing bass port.
Measure both spaces, including room for cables, and check whether you can position the monitors at the same height and at a suitable angle.
Key brands to consider
Yamaha
Yamaha describes the HS3 as an analogue desktop system packaged as a pair.
- Yamaha lists several analogue inputs, a front-mounted volume control and a headphone output.
- The lower frequency limit of 70 Hz is specified at −10 dB, so it isn’t directly comparable with a figure measured at −6 dB.
PreSonus
PreSonus describes the Eris 3.5 2nd Gen as a desktop pair for a workstation where accessible connections and headphone controls are important.
- PreSonus lists balanced 6.3 mm TRS and unbalanced inputs, a front-mounted headphone output and tone controls.
- The manufacturer’s 80 Hz to 20 kHz specification alone doesn’t show how well you’ll be able to assess the double bass in your particular room.
Genelec
Genelec describes the 8010A as a compact individual monitor for a nearfield stereo system made up of two units.
- Genelec lists a width of 121 mm, a depth of 115 mm and an analogue XLR input.
- For stereo, you’ll need two monitors and suitable signal connections. Manufacturer claims about sound neutrality don’t replace listening at your own position.
ADAM Audio
ADAM Audio describes the T5V as a single active 5-inch nearfield monitor.
- ADAM Audio lists a rear-facing bass port and a lower frequency limit of 45 Hz at −6 dB.
- Whether positioning the monitor near a wall or desk works in your particular room, and how easy it is to assess the bass there, depends on the actual setup.
Neumann
Neumann describes the KH 80 DSP as a compact DSP nearfield monitor with positioning adjustments.
- Neumann lists a switch for different desktop placements and optional automatic adjustment with MA 1.
- Manufacturer claims about sound improvements don’t mean that calibration can replace desk space, a suitable signal path or the right positioning for your setup.
Matching products at Joybuy
Related products will be available soon.
Frequently asked questions about studio monitors at a shared desk
How should I set up two monitors for mixing jazz?
Aim both monitors towards the same listening position. Try to position them at the same height and as symmetrically as possible. Genelec describes a 60° angle between the monitors, with the listening position at the point of an equilateral triangle, as the ideal stereo arrangement. Your desk and room can still affect the result.
How can I work at a shared desk without disturbing others with speakers?
Before buying, check whether you can conveniently switch to headphones on the system or through your existing audio source. Yamaha lists a headphone output on the HS3, and PreSonus on the Eris 3.5 2nd Gen. This isn’t a standard feature on all studio monitors.
Do I need to order one monitor or two for stereo?
It depends on the specific model and offer: Genelec lists one monitor per package for the 8010A, while Yamaha describes the HS3 package as a pair. Also check which cables and connections are included with each offer.
Can I tell from the frequency specification whether a monitor is suitable for the double bass?
Not from the lower frequency limit alone: you also need to take the measurement reference and positioning into account. Yamaha lists 70 Hz at −10 dB for the HS3, while Genelec lists 67 Hz at −6 dB for the 8010A. These figures aren’t directly comparable and don’t tell you what you’ll hear at your own listening position.