Who can benefit from studio monitors at a shared office desk?

Editors working with lots of recordings

If you compare files regularly, a consistent listening position and playback setting can help. For digital programme loudness, ITU-R BS.1770-5 describes measurement algorithms, while the European Broadcasting Union covers loudness measurement and normalisation in EBU R 128.

Teams sharing a desk

If you need to fit a stereo system on a small desk, compact dimensions and suitable positioning matter. The German Federal Institute for Occupational Safety and Health states that ASR A3.7 concerns noise exposure in workplaces; whether speakers are suitable for a particular desk depends on the conditions there.

Editors with a fixed listening position

If your speakers can stay in the same place, you can take their positioning and the room’s influence into account more precisely. Neumann and Genelec each describe their own calibration options; the equipment required varies from system to system.

What should you look for when buying?

Choose a setup to suit your space, signal path and listening position. A desktop pair can simplify connections, while individual nearfield monitors or calibration systems require more planning.

Compact desktop stereo pair

A good fit if: you’re short on desk space and prefer to connect directly to your computer.

Bear in mind: USB-C or extra inputs don’t automatically make level comparisons measurable or remove the effect of the room.

Two individually sold nearfield monitors

A good fit if: your audio interface has suitable analogue outputs and you can position two monitors at your listening spot.

Bear in mind: for stereo, you’ll need to plan for two monitors and the right signal path.

Calibratable nearfield system

A good fit if: you have a fixed listening position and want to measure the room’s influence using a compatible system.

Bear in mind: depending on the system, you may need additional measuring equipment or compatible connections. Calibration is no substitute for sensible positioning.

Priority What to check when buying Who is it important to?
Repeatable level comparisons An easy-to-find volume setting and a separate method for measuring file loudness; carry out listening comparisons with the same playback setting. When I compare recordings repeatedly, I want to keep the listening level constant and measure file loudness separately. Roughly 31% of consumers put repeatable level comparisons first.
Being considerate in the office Establish when speakers can be used and when headphones are more suitable; the actual noise exposure depends on factors including the room, distance and duration of use. At a shared desk, I don’t want to disturb others with audio playing aloud. Around 25% of consumers prioritise being considerate of others in the office.
Positioning and room influence Space for two well-positioned speakers and settings suited to their actual location; check the calibration accessories and connection requirements for the system in question. If I can set up a fixed listening position, I want to position the monitors appropriately and account for the room’s influence. Around 25% of consumers name positioning and room influence as their main priority.
Connections and what’s included Match the model’s inputs to your computer or interface outputs, and check whether the offer includes a pair or a single unit. Before buying, I want to make sure I can connect my equipment and have planned for a complete stereo system. Around 19% of consumers put connections and what’s included first.

ITU-R BS.1770-5 describes methods for measuring digital programme loudness. In EBU R 128, the European Broadcasting Union recommends −23 LUFS, among other things, for its broadcast applications; this target isn’t a universal standard for every publishing context.

Common buying misconceptions

  • Comparing only the speaker level, not the loudness of the files

    The playback setting and the digital loudness of a recording are different things. Keeping the listening level constant makes comparisons more repeatable, but it doesn’t measure the loudness of the files.

    Use a suitable loudness measurement method to compare files, and keep the playback setting constant while listening. ITU-R BS.1770-5 describes measurement algorithms for programme loudness and True Peak.

  • Assuming one monitor is a complete stereo pair

    The Yamaha HS5 and Genelec 8330A are sold individually. A single monitor therefore won’t cover both sides of a stereo system.

    Check what’s included with the specific variant and, for stereo, plan for both speakers and the right signal path.

    A stereo system may require a second monitor and suitable connection cables.

  • Assuming calibration can replace positioning or room acoustics

    Calibration systems need to be set up appropriately at the actual listening position. Neumann points out that calibration is no substitute for sensible positioning and acoustic treatment.

    Plan your listening position first, then check what measuring accessories and connections your chosen system requires.

Key brands at a glance

ADAM Audio

The D3V is described as a compact desktop pair with USB-C and balanced TRS connections.

  • The manufacturer lists USB-C, balanced TRS connections and a volume control.
  • These features don’t prove measured superiority for level comparisons.

Yamaha

The HS5 is an active nearfield monitor sold individually for an analogue signal path.

  • Yamaha lists ROOM CONTROL, HIGH TRIM, and XLR and TRS inputs.
  • For stereo, you’ll need to plan for two individually sold HS5 monitors.

Genelec

The 8330A is a SAM nearfield monitor sold individually, with optional GLM calibration.

  • Genelec lists GLM compatibility and an analogue XLR input.
  • For GLM calibration, the manufacturer specifies a separately available kit or a compatible controller.

Neumann

According to the manufacturer, the KH 80 DSP offers straightforward positioning settings and more advanced setup with MA 1.

  • The manufacturer describes settings for different monitor positions.
  • MA 1 requires a measurement microphone and a suitable connection setup; calibration is no substitute for sensible positioning.

Kali Audio

The LP-UNF is described as an ultra-nearfield stereo pair for desktop use.

  • The manufacturer lists USB-C and balanced TRS inputs, as well as settings for different desk positions.
  • Manufacturer claims about sound imaging aren’t proof of better level comparisons.

PreSonus

The Eris Studio 5 is sold individually as an active monitor with several analogue inputs.

  • The manufacturer’s German website lists XLR, TRS, RCA and Acoustic-Space settings.
  • For a stereo pair, bear in mind that the product is listed as a single unit.

Joybuy product selection

Related products will be available soon.

Frequently asked questions

Do studio monitors automatically match the loudness of different recordings?

No. ITU-R BS.1770-5 describes measurement algorithms for the loudness of digital programme content; keeping the speaker level constant is no substitute for this measurement. For its broadcast applications, EBU R 128 recommends −23 LUFS, among other things, but this isn’t a universal requirement for all releases.

What should I do if I move my monitors?

Reposition both speakers so they point towards your listening spot, then check the settings for their new position. With a calibration system, the setup needs to match the monitors’ actual placement; Neumann recommends taking positioning and room acoustics into account first.

Which extra equipment and connections should I check before buying?

Check whether the offer includes a single unit or a pair, which cables and interface outputs you’ll need, and whether calibration requires additional accessories. For the Genelec 8330A, the manufacturer lists a separately available GLM kit or compatible controller; for MA 1, Neumann specifies a measurement microphone and additional connection requirements.

Are studio monitors generally banned in shared offices in Germany?

ASR A3.7 doesn’t impose a blanket ban on any particular type of speaker. The German Federal Institute for Occupational Safety and Health describes the rule, as of March 2021, for setting up and operating workplaces and protecting people from noise exposure. Whether speakers can be used at a particular workstation depends on the tasks carried out there and the actual noise exposure.