For comparing transients and assessing the stereo image, two suitably positioned nearfield monitors and a symmetrical listening position are essential. If desk space is limited, a desktop system designed for this purpose may also be worth considering. For kick drums and low toms, compare frequency figures alongside their measurement tolerances, and assess the bass from your own listening position. A larger woofer alone won’t solve room problems, and connections, quantity and any room-calibration components should also factor into your decision.
Which approach is right for you?
For detailed editing and stereo work
If you’re comparing transients, checking for bleed or positioning percussion in the stereo image, a consistent listening position gives you comparable conditions for both channels. Genelec recommends aiming the monitors towards your listening position and arranging them at a 60° angle.
Editing kick drums and toms
When assessing low drum frequencies, always compare frequency figures alongside their respective dB tolerances. Kali Audio, Yamaha and ADAM Audio use different reference points; wall distance and room modes also affect the bass at your listening position.
Working at a desk
If your monitor and office set-up leave little room, check whether you can sensibly position two channels and whether the connections and contents of the box suit your workspace. Kali Audio describes the LP-UNF as a desktop stereo system, while Yamaha and Genelec each list a single monitor in the HS5 and 8030C packaging respectively.
What should you look for when buying?
| Buying criterion |
What to look for |
Who should pay particular attention |
| Transients and stereo image |
Check whether you can position both monitors in the same way and aim them towards your listening position. Also consider the recommended listening distance. |
If I want to compare transients and assess the stereo image, I need a fixed, symmetrical listening position. Around 33% of consumers are likely to prioritise transients and the stereo image. |
| Low frequencies from kick drums and toms |
Compare the lower frequency figure only alongside its respective dB tolerance. Take wall distance and listening position into account. |
If you want to assess low kick and tom frequencies reliably, don’t assume that the figures on a spec sheet reflect the bass you’ll hear at your listening position. Around 27% of consumers are likely to prioritise low-frequency performance. |
| Space for two channels |
Measure the available desk space and listening distance. Check whether the listing includes one monitor or a pair. |
If my desk has limited space, I still need to allow room for a sensible stereo set-up. Around 27% of consumers are likely to prioritise finding space for both channels on their desk. |
| Connections and what’s included |
Match the monitor inputs to the outputs on your computer or audio interface. Check the quantity, cables required and, where applicable, the components needed for room calibration. |
If you want to connect your existing equipment and put together a complete stereo system, check the connections and what’s included together. Around 13% of consumers are likely to prioritise these points. |
Common misconceptions
-
Ranking lower frequency limits without considering dB tolerance
Figures such as 39 Hz at −10 dB and 39 Hz at −6 dB aren’t based on the same measurement reference. The room and speaker positioning can also affect bass at your listening position.
Note the frequency and measurement tolerance together. Assess the set-up before using a single Hz figure to decide whether a monitor is suitable for kick drum frequencies.
-
Assuming a single monitor is the same as a stereo pair
Yamaha lists the HS5 as a single unit, and Genelec also states that each 8030C pack contains one monitor. You may therefore need a second monitor for stereo.
Check the quantity and contents of each specific listing to make sure you have both channels.
A stereo pair may also require a second monitor and suitable connection cables.
-
Thinking room correction can replace proper positioning
Reflections and room modes depend on the room and the monitors’ position. Genelec points out that calibration won’t fix every acoustic problem.
First plan a suitable listening position, then consider whether model-specific adjustment or calibration would be useful for you.
Neumann’s MA-1 calibration may require additional measurement and connection components.
Key brands at a glance
Kali Audio
The LP-UNF is designed as a desktop stereo system, while the LP-6-V2 and LP-8-V2 are separate nearfield monitors.
- Kali Audio lists several desktop and wall-positioning options for the LP-UNF, as well as USB-C, RCA and balanced jack inputs.
- The manufacturer’s 39 Hz figure is at −10 dB; the ±3 dB range starts at 54 Hz. Neither figure on its own tells you how the bass will sound at your particular listening position.
Yamaha
The HS series comprises separate active nearfield monitors, with the HS5 a more compact option within the range.
- Yamaha lists XLR and jack inputs for the HS5, along with ROOM CONTROL and HIGH TRIM settings.
- The European product page gives a figure of 74 Hz at −3 dB and lists the HS5 as a single boxed monitor. Check whether you’ll need two for stereo.
ADAM Audio
The T7V is a separate nearfield monitor. Before choosing it, make sure its low-frequency performance and the space it needs suit your room.
- ADAM Audio lists a 7-inch woofer and a figure of 39 Hz at −6 dB.
- The rear bass-reflex port makes its exact position relative to the wall important. The manufacturer’s descriptions of sound quality are not independent comparative measurements.
Genelec
The 8030C is a single active monitor with rear-panel switches for room adjustment.
- Genelec lists 47 Hz at −6 dB for the 8030C and notes that it has room adjustment switches on the rear.
- Genelec says the room and listening position affect the result, and lists one monitor per pack.
Neumann
The KH 120 II is a nearfield monitor with DSP and support for optional MA-1 calibration.
- Neumann recommends a listening distance of 1–2 m and specifies a frequency range of 44 Hz to 21 kHz at ±3 dB.
- MA 1 requires additional measurement and connection components. Factor in the set-up when comparing options; calibration doesn’t replace proper positioning.
Joybuy products
Related products will be available soon.
Frequently asked questions
How should I position two monitors for editing percussion?
Aim both monitors towards your listening position, placing them as symmetrically as possible and at the same height. Genelec recommends a 60° angle between the left and right monitors, with your listening position at the apex of an ideally equilateral triangle. Check how they sound in your room; there’s no single wall distance that works for every model.
Do I need calibration for the Neumann KH 120 II?
No, MA 1 is optional calibration software. If you want to use it, Neumann’s instructions specify, among other things, the MA-1 measurement microphone, an audio interface with a suitable microphone input and 48 V phantom power, and network connections. Genelec notes that calibration can’t replace every acoustic treatment.
What should I check about quantity, returns and warranty?
First check the quantity in the specific listing: Yamaha lists the HS5 as a single unit, while Genelec states that each 8030C pack contains one monitor. In Germany, consumers buying online generally have a 14-day right to cancel, as explained by the Verbraucherzentrale. Statutory rights against the seller are separate from a voluntary guarantee.
Can old active studio monitors go in household rubbish?
No. Section 10 of the German Electrical and Electronic Equipment Act (ElektroG) requires waste electrical and electronic equipment to be collected separately from unsorted municipal waste. The German Environment Agency lists local collection points as a generally free way to return it.