Who is this selection for?

Live-session editors sharing a listening spot

You edit a multitrack or stereo recording at a shared desk and want to be able to restore your speaker positions and listening level after someone else has used the workspace.

Editors with limited desk space

For you, it matters whether a complete stereo system can be positioned and angled sensibly alongside your screen and work equipment.

Editors focused on low-frequency instruments

You also assess kick drums or bass while editing, and want to compare frequency figures only when you take their respective measurement references into account.

What should you look for when buying?

Compact desktop stereo pair

A good fit if: you have limited space or want to quickly restore a familiar volume level and signal path after someone else has used the desk.

Trade-off: Check the connections and the actual signal path. For USB operation of the D3V, ADAM Audio specifies internal processing at 48 kHz/16 Bit.

Desktop pair with placement options

A good fit if: the monitors need to sit on a desk or close to a wall, and you need to account for different positions.

Trade-off: Adjustment options are no substitute for suitable positioning or checking the sound from your own listening spot.

Two separate nearfield monitors

A good fit if: you can position both speakers separately and as symmetrically as possible, and have suitable analogue outputs available.

Trade-off: Allow for two units and the right connections. Low-frequency figures with different dB references cannot be compared directly as a ranking.

At a shared editing desk, repeatable positioning, a suitable signal path and a complete package all matter. The approximate percentages below give an idea of the priorities for this particular setup.

Priority What to look for when buying Who is it most important for?
Stereo image at the listening spot Both speakers should be aimable towards your listening spot and positioned at the same height. If you need to assess balance and instrument positions in a stereo mix, symmetrical positioning is important. Around 26% of consumers put the stereo image first.
Repeatable desk positioning Measure the space for both units; marking their positions can make it easier to restore the setup when the desk is shared. If other people use the desk, you’ll want to be able to quickly restore a suitable setup. Around 26% of consumers prioritise repeatable positioning.
Connections and switching between listening options Check the inputs and outputs, and find out where headphones connect in your signal path. If you switch between a computer, audio interface or headphones, the connections should suit your existing equipment. Around 21% of consumers focus mainly on connections and switching between listening options.
Kick drum and bass Compare frequency limits only when they use the same dB reference, and take positioning at the listening spot into account. If low-frequency instruments are crucial to your editing, you’ll want to assess their sound under your actual placement conditions. Around 16% of consumers prioritise low-frequency performance.
Complete stereo system Check whether the offer includes a pair or a single unit, and find out which cables you’ll need. If you’re putting together a ready-to-use stereo system, you’ll need to consider the number of units and the necessary connections. Around 11% of consumers focus on the complete set of items they need to buy.

Common buying mistakes

  • One active monitor is already a stereo pair

    The Genelec 8010A is sold individually, while PreSonus describes the Eris 3.5 2nd Gen as a pair. The difference in the number of units means you may need a second one for a complete stereo system.

    Before buying, check the number of units, connections and what’s included. Also allow for suitable signal cables.

  • Comparing bass figures with different dB references as if they were alike

    Genelec specifies 67 Hz at −6 dB for the 8010A, Yamaha specifies 74 Hz at −3 dB for the HS5, and ADAM Audio specifies 45 Hz at −6 dB for the T5V. These figures don’t all use the same measurement reference, and positioning also affects the sound at your listening spot.

    Check the measurement reference for each figure, and assess critical low-frequency instruments with your monitors in their actual positions.

  • A USB connection reproduces every session at its original resolution

    For USB operation of the D3V, ADAM Audio specifies internal processing at 48 kHz/16 Bit. According to the manufacturer, files with a higher resolution aren’t played back in their original format over USB.

    If the original sample rate or bit depth matters for your monitoring, check the entire listening signal path, not just the type of connection.

Key brands to consider

ADAM Audio

The D3V is a compact desktop pair with USB-C or analogue TRS inputs; the T5V is an analogue nearfield monitor sold individually.

  • ADAM Audio says the D3V pair includes stands, volume controls and placement settings. In USB mode, it processes the signal internally at 48 kHz/16 Bit.
  • According to the manufacturer, the T5V has XLR and RCA connections, plus a rear-facing bass reflex port.
  • Check where the T5V will sit in relation to the wall and desk. The D3V’s USB processing is relevant if you work with files at a higher sample rate or bit depth.

PreSonus

The Eris 3.5 2nd Gen is an analogue desktop pair with controls readily accessible at your workspace.

  • PreSonus lists a front-mounted volume control, a headphone output, balanced TRS inputs and unbalanced inputs for this model.
  • If low-frequency instruments are important to your editing decisions, assess how well the monitors suit your actual listening spot rather than relying on a frequency figure alone.

Kali Audio

The LP-UNF is a desktop pair with settings for different desk and wall positions; the LP-6 V2 is a larger, separate nearfield alternative.

  • Kali Audio describes the LP-UNF as having settings for different positions on or behind a desk.
  • A front port won’t eliminate reflections from walls or the room. Check the position from your own listening spot.

Genelec

The 8010A is a compact active monitor sold individually, suitable if you can position two units separately and connect them via XLR.

  • Genelec lists an Iso-Pod, placement controls and one XLR input per monitor.
  • You’ll need two units for stereo. The manufacturer’s figure of 67 Hz at −6 dB isn’t directly comparable with figures using a different dB reference.

Yamaha

The HS5 is an active 5-inch nearfield monitor sold individually, with analogue inputs.

  • Yamaha lists ROOM CONTROL and HIGH TRIM, along with XLR and jack inputs.
  • You’ll need two units for stereo. The stated frequency limit of 74 Hz at −3 dB isn’t directly comparable with a −6 dB figure.

Suitable products on Joybuy

Related products will be available soon.

Frequently asked questions

How should I position two monitors for stereo editing?

Aim both monitors towards your listening spot and position them as symmetrically as possible. Genelec recommends an equilateral triangle, with the listening spot at the apex and a 60° angle between the monitors. At a shared desk, keeping the distances and heights consistent can help.

Can I connect headphones directly to any studio monitor?

No, it depends on the model. PreSonus lists a front-mounted headphone socket for the Eris 3.5 2nd Gen; the Genelec 8010A has an analogue XLR input, according to the manufacturer. Check where headphones connect in your signal path.

What happens if a product develops a fault in Germany?

For a consumer purchase from a business, statutory rights relating to faulty goods are separate from a voluntary manufacturer’s guarantee. For ordinary goods, the limitation period is generally two years from delivery; check the terms of any additional guarantee separately.

What should I know about CE marking and disposal?

For products covered by the relevant EU CE marking rules, the manufacturer is responsible for conformity assessment and the EU Declaration of Conformity. The CE mark is not an independent quality rating for sound. In Germany, old electrical equipment must not be put in household waste; it should be taken to a separate collection point, such as a recycling centre or an appropriate take-back point.