Which approach is right for you?

Mixing engineers short on desk space

If there’s little room alongside your other work, the dimensions of a stereo pair and the ability to position both speakers sensibly are key. Genelec lists the 8010A as 121 mm wide, while Yamaha gives the HS3 a width of 132 mm per speaker.

Soundtrack mixers working with deep effects

If you need to assess low-frequency music and effects, consider each model’s bass specifications alongside how they were measured. You may need more space for larger monitors, and positioning and room acoustics will still affect what you hear at your listening position.

Mixing engineers at a frequently shared workspace

If the way the space is used or your listening position changes, consider whether you can set up the speakers in a consistent way each time. You’ll also need to take other people using or working near the space into account.

What should you look for?

First check whether there’s room for a stereo pair on your shared desk. Then make sure the bass response, workflow and connections suit your set-up.

Buying priority What to check before buying Who values this most?
Space and stereo positioning Check the width, depth, cable routing and listening position for both speakers. Genelec lists the 8010A as 121 mm wide, while Yamaha gives the HS3 as 132 mm per speaker. When I share my desk, I need enough room to position a stereo pair symmetrically. Around 36% of consumers in this buying situation prioritise space and stereo positioning.
Assessing deep effects Only compare frequency specifications measured using the same level definition. Genelec lists the 8010A at 67 Hz at −6 dB, Yamaha the HS3 at 70 Hz at −10 dB, and ADAM Audio the T5V at 45 Hz at −6 dB. When deep musical and effects content matters to my mix, I want to be able to assess it reliably at my listening position. Around 29% of consumers prioritise assessing bass.
Shared workspace Check whether the pair can stay set up and how you’ll return to the same listening position. If you’re considering a calibration system, check the requirements for that specific system. When the way the space is used changes, I need a consistent monitoring set-up and have to take other people into account. Around 21% of consumers prioritise this workflow and shared use.
Connections and what’s included Check the quantity, input types and connection to your audio interface. Genelec lists the 8010A as a single monitor with an analogue XLR input; Yamaha describes the HS3 as a pair with several input types. Before I order, I want to know whether the listing is for one speaker or a pair, and whether the connections work with my interface. Around 14% of consumers check connections and what’s included first.

Common buying and set-up mistakes

  • Treating different frequency specifications as a sound quality ranking

    The specifications for the Genelec 8010A, Yamaha HS3 and ADAM Audio T5V use different level definitions. Positioning also affects the sound at your listening position.

    Only compare frequency specifications measured using the same definition, and check deep soundtrack content on a suitable monitoring system as well.

  • Confusing a single monitor with a stereo pair

    Genelec lists the 8010A as one monitor per pack, while Yamaha describes the HS3 as a pair. You may therefore need to order a different quantity for a stereo set-up.

    Check the specific listing for the version and quantity included. Also make sure the cables are suitable for your signal path.

  • Relying on room correction instead of positioning your monitors properly

    Room calibration is no substitute for sensible positioning that’s as symmetrical as possible. Neumann’s MA 1 is designed for specific configurations, and the requirements depend on your particular set-up.

    First check whether both speakers can be positioned sensibly at your workspace. Then make sure your monitors and accessories are compatible with the calibration system you want to use.

Key brands at a glance

Genelec

The 8010A is a compact active monitor. Genelec lists its width as 121 mm and specifies an analogue XLR input.

  • Its dimensions can make it easier to plan a set-up where space is limited.
  • One unit per pack, so you’ll need to allow for two monitors for stereo. The stated lower limit of 67 Hz is measured at −6 dB and isn’t a measurement taken at your own desk.

Yamaha

Yamaha describes the HS3 as a compact active system supplied as a pair, with several input types.

  • The pair supplied and range of inputs can both be factored into your signal path planning.
  • The 70 Hz specification is measured at −10 dB, so it can’t be directly compared with frequency figures measured at −6 dB.

ADAM Audio

According to ADAM Audio, the T5V active nearfield monitor has a 5-inch woofer and a rear-firing bass reflex port.

  • ADAM Audio lists the T5V at 45 Hz at −6 dB.
  • This frequency figure doesn’t show how the bass will sound at your particular desk. As it has a rear-firing bass reflex port, consider how you’ll be able to position it.

Neumann

The KH 80 DSP is a compact active nearfield monitor with room adaptation options.

  • Its adjustment options may be useful if you have a fixed listening position.
  • MA 1 is designed for specific set-ups. Before buying, check compatibility and which accessories you’ll need for your chosen configuration.

IK Multimedia

IK Multimedia describes the iLoud Micro Monitor as a compact stereo system for small workspaces.

  • According to the manufacturer, the system includes a pair with 3-inch woofers; the stated dimensions are for each speaker.
  • Check what’s included and which connections you’ll need for the version you choose. The manufacturer’s accuracy claims don’t guarantee the results at your own workspace.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

How should I position a stereo pair on a shared desk?

If there’s enough room, position both monitors symmetrically and angle them towards your listening position. Genelec recommends a 60° angle between the monitors and, ideally, an equilateral triangle layout. The room and furniture will still affect the result.

Do I automatically need MA 1 with the Neumann KH 80 DSP?

No. Additional calibration isn’t a requirement when choosing a monitor. If you want to use MA 1, check Neumann’s requirements for your specific stereo set-up, including compatible monitors and the calibrated measurement microphone.

Should I order one speaker or two?

It depends on the specific listing: Genelec lists the 8010A as one monitor per pack, while Yamaha describes the HS3 as a pair. Check the version and quantity offered before you buy.

Are the same quiet hours in force everywhere when working with speakers?

You can’t assume the same quiet hours apply in every workplace. For noise affecting neighbours, Germany’s Federal Environment Agency points to regulations set by the federal states and local authorities, as well as building rules. Check the requirements for your specific location and type of workspace.

How should I dispose of old active monitors?

In Germany, electrical and electronic waste must not go in household rubbish. The Federal Environment Agency advises disposing of it separately. If the equipment belongs to a business, check the appropriate return route.