Who’s mixing a folk demo at a small desk?

Folk mixers with a small desk

If you need to fit two speakers alongside your computer and screen, a practical, as symmetrical as possible stereo setup matters. Genelec, ADAM Audio and Kali Audio also cover speaker placement in their guidance.

Vocal and acoustic instrument mixers

If you want to assess vocals and acoustic instruments, you need a stereo pair that can be sensibly positioned to your left and right, rather than choosing speakers based on size alone.

Demo mixers working with bass or kick drum

If your folk demo includes low frequencies, bear in mind the limited bass assessment offered by compact monitors when choosing your listening reference.

What should you look for?

Compact desktop pair

A good fit if: You’re short on desk space or want to use a direct USB-C connection. ADAM Audio D3V and Kali Audio LP-UNF are designed for desktop setups, according to their manufacturers. Check the dimensions and inputs of the specific version you’re considering.

Bear in mind: Compact cabinets don’t eliminate room reflections or poor positioning. ADAM Audio specifies 48 kHz and 16-bit audio in USB mode for the D3V.

Two separate active monitors

A good fit if: You have enough room for a symmetrical setup and the inputs are compatible with your computer or audio interface. Models such as the Yamaha HS5 and ADAM Audio T5V are available as individual active monitors.

Bear in mind: You’ll need two monitors and suitable cables for stereo. The T5V has a rear bass reflex port, so check its position from your listening spot if you’re placing it close to a wall.

Criteria What to check before buying Who it matters most to
Desk space and stereo positioning Check the width and depth of both monitors, the position of your screen and how the speakers will face your listening spot. If there’s hardly any room beside your screen and computer, a symmetrical listening position is essential. Around 33% of consumers cite desk space and positioning as their main concerns.
Vocals, instruments and stereo balance Choose a suitable stereo pair, position both speakers towards your listening spot and check the room adjustment options on the specific model. If you want to assess vocals and acoustic instruments in your mix, you need reliable left-to-right playback. Around 27% of consumers prioritise this.
Prominent bass Compare low-frequency figures only when you know how they were measured, and check your demo using another suitable listening reference. If my demo includes bass or kick drum, I don’t want to judge the low frequencies using a single frequency figure alone. Around 20% of consumers cite bass assessment as their main concern.
Connections and a complete stereo system Check the number of units, the outputs on your audio source, the monitor inputs and the cables you’ll need. If I want to put together a ready-to-connect pair, I need to know whether one or two units are included and which cables will fit. Around 20% of consumers prioritise connections and what’s included.

Common buying mistakes

  • Comparing the price of one monitor with the price of a pair

    One active monitor on its own doesn’t make a stereo system. What’s included varies between models.

    Before buying, check whether you’ll receive one or two units and whether the connections are compatible with your audio source.

  • Choosing a bass monitor based on one low-frequency figure

    Manufacturers specify frequency limits using different dB references, and your room and speaker placement also affect what you hear.

    Compare how the figures were measured and check the relevant bass in your demo using another suitable listening reference.

  • Treating room adjustment as a substitute for good positioning

    Adjustment options don’t change the fact that reflections and uneven distances can affect the stereo image at your mixing position.

    Plan where to place both speakers first, then use any available settings to suit their actual position.

Brands to consider

The details below refer to the model ranges mentioned and can help you compare their design, connections and positioning. They don’t tell you how a model will sound in your room.

ADAM Audio

The D3V is a compact desktop pair; the T5V is a separate active 5-inch nearfield monitor.

  • ADAM Audio says the D3V has USB-C and balanced TRS inputs; in USB mode, it operates at 48 kHz and 16-bit, according to the manufacturer.
  • The T5V has a rear bass reflex port. For the D3V, the manufacturer’s specifications are no substitute for listening in your own setup.

Kali Audio

The LP-UNF is designed as a pair for desktop mixing, according to Kali Audio, and offers settings for different desk and wall positions.

  • The manufacturer lists USB-C, balanced TRS inputs and a front port.
  • Even with these adjustment options, you’ll still need to take the actual speaker position and your listening spot into account.

Genelec

The 8010A is a very compact active monitor, sold individually, so you’ll need two for a stereo pair.

  • Genelec specifies a width of 121 mm including the Iso-Pod, as well as an analogue XLR input.
  • The manufacturer gives 67 Hz as the lower limit at −6 dB. This figure alone can’t predict how well you’ll hear low frequencies in your room.

Yamaha

The HS5 is an individually boxed active 5-inch monitor with an XLR or jack connection.

  • Yamaha Europe lists dimensions of 170 × 285 × 222 mm per unit and Room Control switches.
  • You’ll need two units for stereo. The stated frequency figure at −10 dB isn’t directly comparable with figures at −6 dB.

PreSonus

The Eris 3.5 2nd Gen is sold as a compact pair with several types of analogue connection.

  • PreSonus lists balanced TRS, unbalanced mini-jack and RCA inputs, as well as a headphone output.
  • The manufacturer specifies 80 Hz to 20 kHz. For demos with prominent bass, check the low frequencies using another listening reference too.

KRK

The ROKIT 5 Generation Five is an active 5-inch monitor sold individually.

  • KRK lists Mix, Focus and Create modes, as well as additional EQ combinations.
  • The modes’ suitability is the manufacturer’s recommendation, not independent evidence of better mixing decisions. You’ll need two units for stereo.

Joybuy products

Related products will be available soon.

Frequently asked questions

Is one active monitor enough for my stereo demo?

No. You need two speakers to assess the left and right channels separately. Genelec sells the 8010A individually, as does Yamaha with the HS5; PreSonus sells the Eris 3.5 2nd Gen as a pair.

How should I position studio monitors on my desk?

Point both speakers towards your listening spot and aim for equal distances and surroundings that are as symmetrical as possible. Genelec describes a 60° angle between the monitors, with your listening spot at the apex of an ideally equilateral triangle. Check what your desk allows.

How should I care for my monitors?

Follow the instructions for the model you’ve bought. ADAM Audio recommends cleaning its monitors with a damp, lint-free cloth. According to the manufacturer, speaker cones should only be dusted with a very soft brush.

What warranty rights apply if a product develops a fault after purchase in Germany?

If you buy from a trader, you’re covered by statutory consumer rights. According to consumer information from Your Europe, you’re entitled to at least two years’ protection from the date you receive the goods. This is separate from any additional manufacturer’s guarantee. If a product is faulty, contact the seller.

Can I put old studio monitors in my household rubbish?

No. Electrical waste must be collected separately. The German Environment Agency explains the separate collection requirements in Germany and the Electrical and Electronic Equipment Act. Find a suitable collection or take-back point.