For speech editing at a small desk, a stereo pair that you can position easily and connect to your computer or audio interface is a practical choice. When recording with a live microphone, switch to headphones to prevent sound from the speakers feeding back into the mic. The ADAM Audio D3V and Kali Audio LP-UNF offer USB-C and analogue inputs; Yamaha describes the HS3 as an analogue pair, while Genelec sells the 8010A individually. Compare the footprint, positioning options and what’s included, and check the connections on the specific version of the iLoud Micro Monitor you’re considering.
Who are compact studio monitors suitable for?
Speech editors with limited desk space
When your screen and other equipment already take up space, you still need to position both speakers towards your listening position. Check the cabinet dimensions, footprint and potential reflections from the desk. ADAM Audio, Kali Audio and Genelec describe relevant connection or positioning features for their respective models.
Speakers switching between recording and editing
If you edit and record with a live microphone in the same space, plan a practical way to switch to headphone monitoring. PreSonus lists a front-mounted headphone socket on the Eris 3.5 2nd Gen; Shure explains how sound from speakers can feed back into a microphone and cause feedback.
Editors with an existing audio interface
If you want to keep using your existing outputs, they need to match the monitors’ inputs. Yamaha and PreSonus describe analogue stereo pairs; Genelec supplies one 8010A monitor per pack, so you’ll need two for stereo.
What should you look for when buying?
First, check that you have room for two speakers on your desk and can angle them towards your listening position. Then compare the signal path, recording workflow and what’s actually included.
For people editing spoken-word intros at a small desk, the main priorities depend on available space, recording setup, connections and the stereo system you want.
| Buying consideration |
What to check before buying |
Who should consider this? |
| Positioning on a cramped desk |
Check the dimensions of both units, including stands and space for cables. Position the speakers as symmetrically as possible towards your listening position. Only adjust the room-correction switches to suit the actual position of your desk and walls. |
If there’s very little free space on your desk, you still need to find a practical spot for two speakers. Around 36% of shoppers put positioning first. |
| Speech editing and recording |
Plan to use headphones when recording with a live microphone, and check whether a headphone socket on the monitor suits your signal path. |
If you edit and record with a live microphone in the same space, you need a practical way to switch to headphone monitoring. Around 29% of shoppers prioritise speech monitoring and recording. |
| Connecting to a computer or audio interface |
Check your existing outputs against the inputs on the specific monitor version, and make sure you have the cables you need. ADAM Audio and Kali Audio list USB-C and analogue inputs for the D3V and LP-UNF respectively. |
If you want to keep using your existing computer or audio interface outputs, the connection needs to be compatible. Around 21% of shoppers consider connection compatibility a top priority. |
| Complete stereo system |
Check what’s in the box and how many units you need: Yamaha describes the HS3 as a pair, while Genelec describes the 8010A as a single monitor. Remember to plan for suitable signal and power connections too. |
If you’re putting together a complete stereo system, check whether the product is sold as a pair or as a single unit. Around 14% of shoppers first check what’s included in the system. |
Avoid common buying mistakes
-
Assuming a single monitor is a complete stereo pair
One monitor per pack isn’t enough for stereo monitoring. Genelec lists the 8010A as a single unit, while Yamaha sells the HS3 as a pair.
Before ordering, check what’s included and how many connections you’ll need.
Depending on your signal path, you may need a suitable audio interface or signal cables.
-
Relying on positioning controls instead of placing the speakers correctly
Reflections and differences in distance affect what you hear at your listening position. A room-correction switch is no substitute for correct positioning.
First, point both speakers towards your listening position. Then choose the setting that matches the actual position of your desk and walls.
A guide to the key brands
ADAM Audio
The D3V is described as a compact desktop pair with USB-C and analogue TRS connections.
- ADAM Audio lists positioning switches and detachable stands as included accessories.
- According to ADAM Audio Support, USB mode operates at 48 kHz/16-bit. Check whether this resolution suits your monitoring chain.
Yamaha
Yamaha describes the HS3 as a compact pair with analogue connections.
- Yamaha lists combo, RCA and stereo mini-jack inputs, along with Room Control and High Trim switches.
- USB audio input isn’t included in the listed connections, so check that the analogue inputs match your source.
PreSonus
The Eris 3.5 2nd Gen is described as a compact analogue pair with front-mounted controls.
- PreSonus lists TRS, RCA and mini-jack inputs, as well as a front-mounted headphone socket.
- These details apply to the Eris 3.5 2nd Gen and don’t automatically apply to other Eris models.
Kali Audio
Kali Audio describes the LP-UNF as a desktop system with settings for different desk and wall positions.
- Kali Audio lists USB-C, Bluetooth and analogue inputs.
- Check which setting suits your particular setup. The manufacturer’s claims about sound benefits don’t independently demonstrate how the system will sound in your workspace.
Genelec
The 8010A is a slim active monitor with an analogue connection.
- Genelec lists a cabinet width of 121 mm and an analogue XLR input.
- Genelec states that the pack contains one monitor. You’ll need two units and suitable connections for stereo monitoring.
IK Multimedia
IK Multimedia describes the iLoud Micro Monitor as a compact stereo pair.
- The manufacturer’s product pages list the system as a pair.
- The input details differ between the manufacturer pages reviewed. Before connecting the monitors to your source, check the connections on the specific version you’re buying.
Suitable products at Joybuy
Relevant products coming soon.
Frequently asked questions
How should I position two studio monitors for speech editing?
Point both speakers towards your listening position and position them as symmetrically as possible. Genelec recommends a 60° angle at the listening position for stereo. You should also take reflections from your desk and walls into account in your particular setup.
Should I monitor through the speakers while recording speech?
If a live microphone picks up sound from the speakers, feedback can occur. Shure explains how this happens, so it’s a good idea to use a suitable headphone setup when recording. You can then use the monitors for editing.
Why isn’t the lower frequency limit on the spec sheet enough to make a buying decision?
Figures measured against different reference levels aren’t directly comparable. For example, Yamaha gives a limit of −10 dB for the HS3, while Genelec gives a limit of −6 dB for the 8010A. These manufacturer figures also don’t automatically tell you how the monitors will sound at your listening position.
What rights do you have when buying online from a business seller?
For new goods, the European Union provides for a minimum legal guarantee of two years against the seller. Online purchases generally come with a 14-day right to cancel from the day you receive the goods, although exceptions may apply; the Verbraucherzentrale explains these conditions. An additional manufacturer’s guarantee is not the same as the legal guarantee.