Who this guide is for

Checking for residual hiss

When you compare digitised tapes before and after noise reduction, you’ll want to hear any changes to speech or music as well as the hiss that remains. The Audacity manual describes listening to the removed residual signal as an additional way to check the results.

Listening while standing

At a height-adjustable desk, you need a consistent, symmetrical listening position that both monitors can be aimed at. Genelec and ADAM Audio explain how to position monitors towards your listening position or ears.

Connecting directly to your computer

If you want to listen without assuming you have an audio interface, check whether the specific model has a documented USB audio input or needs a suitable analogue connection. ADAM Audio, Kali Audio and Yamaha list different inputs for their respective models.

What to look for when buying

What you need What to check before buying Who is this especially important to?
Residual hiss and processing artefacts Compare the original and processed passage at similar listening levels; if possible, listen to the removed residual signal too. If I need to judge whether noise reduction has also changed speech or music, I compare all relevant versions under listening conditions that are as similar as possible. Around 36% of consumers are likely to put this check first.
Positioning at a standing desk Allow space for both speakers and take your actual ear height and standing position into account. If I work standing up, I want to be able to position both monitors symmetrically towards my listening position. Around 29% of consumers are likely to prioritise suitable positioning at a standing desk.
Connecting to a computer or interface Match the outputs on your audio source to the inputs explicitly listed for the specific model. If I want to listen without assuming I have an additional audio interface, I need a signal path that suits my source. Around 21% of consumers are likely to check connection compatibility first.
A complete stereo system Check the pack contents and whether you’ll need any additional cables or stands for your setup. If I’m planning a complete stereo setup, I need to know whether the box contains a pair or just one monitor. Around 14% of consumers are likely to prioritise what’s included and any extras they’ll need.

Common buying mistakes

  • Assuming a frequency response figure means tape hiss will be easier to detect

    Lower frequency limits can be specified differently depending on the model and reference level. They don’t tell you which monitor will make processing artefacts easier to detect.

    Compare frequency figures only alongside their respective measurement definitions, and assess your recording under consistent listening conditions.

  • Assuming a single nearfield monitor is a complete stereo setup

    Yamaha specifies the HS3 as a pair, while Genelec lists one 8010A monitor per pack. The pack contents affect what you’ll need to budget for stereo.

    Check the pack contents of the specific variant and allow for two compatible monitors for stereo.

  • Using your seated setup unchanged when standing

    Changing the desk height changes the listening geometry. If your monitors aren’t aimed at your ears or aren’t positioned symmetrically, your stereo listening position can change.

    Aim both monitors at your actual ear position when standing, and plan their placement across the desk’s full range of height adjustment.

  • Assuming USB-C or an advertised desk setting is a universal solution

    Inputs vary by model. Settings for desk or wall placement are also model-specific and don’t replace suitable positioning.

    Check the documented audio inputs and the setting recommended for your setup on the specific model.

Relevant brands at a glance

Yamaha

The HS3 is a compact active pair for an analogue-connected stereo setup where space is limited.

  • Yamaha lists several analogue inputs and rear-panel adjustments for room and height.
  • A stated lower frequency figure doesn’t prove that tape hiss or processing artefacts will be easier to hear.

ADAM Audio

The D3V is a desktop pair with USB-C and TRS inputs; the T7V is a nearfield monitor that needs a different placement.

  • ADAM Audio lists detachable stands for the D3V.
  • The T7V’s vertical operation and rear bass-reflex port need to be factored into your setup. Manufacturer specifications aren’t independent proof that noise artefacts will be easier to detect.

Kali Audio

According to the manufacturer, the LP-UNF is designed for close listening at a desk.

  • The specifications list settings for different desk and wall positions, along with USB-C and analogue inputs.
  • The manufacturer’s claims about reflections don’t prove an advantage when assessing tape hiss artefacts.

Genelec

The compact 8010A is worth considering for analogue XLR setups.

  • Genelec lists a cabinet width of 121 mm and one Iso-Pod per monitor.
  • Each pack contains one monitor, so you’ll need two for stereo. The manufacturer’s claims about neutrality aren’t independent measurements for use at a standing desk.

Neumann

According to the manufacturer, the KH 80 DSP offers model-specific adjustments for different placements.

  • Neumann documents a rear Acoustical Control switch for free-standing placement and different desk sizes.
  • Further calibration with MA 1 is a separate option; check whether the accessory is included with the specific offer.

Suitable products on Joybuy

Similar products coming soon.

Frequently asked questions

How can I check whether removing tape hiss has lost any wanted signal?

Compare the original recording with the processed passage under listening conditions that are as similar as possible. The Audacity manual also recommends listening to the removed residual signal to assess possible changes to the wanted audio. This is a checking method in the software, not a guaranteed feature of any speaker.

Do studio monitors need to be at a fixed standard height when I’m standing?

No. Aim the monitors’ acoustic centres at your actual ear position when working standing up. If they’re positioned noticeably higher or lower, ADAM Audio recommends angling them accordingly. Keep both sides symmetrical.

What should I check about connections and positioning at a height-adjustable desk?

Match your audio source’s outputs to the inputs explicitly listed for the specific model; a USB-C port alone doesn’t confirm USB audio compatibility. Route cables so they aren’t pulled when the desk moves, and follow the model’s instructions on placement, ventilation and cleaning.

Is a two-year manufacturer’s warranty compulsory when buying in Germany?

No. Your statutory rights against the seller and a voluntary manufacturer’s warranty are different things. The European Union’s consumer information states that purchases from business sellers come with at least two years of statutory consumer rights from receipt; an additional warranty must not reduce those rights. The same rules don’t apply in the same way to purchases from private individuals.

What should I look out for when it comes to product safety and disposal?

The Bundesnetzagentur lists checks in its market surveillance that include correct CE marking, identifiable manufacturer details and German instructions with any required warnings. A product image in a shop doesn’t prove that a specific device complies with the rules. According to the German Environment Agency, old electrical equipment shouldn’t go in household waste. It should be taken to a separate collection point, such as a recycling centre.