Who this monitoring setup is for

Checking for residual hiss

You compare quiet passages before and after tape denoising, and don’t want to mistake noise from your speakers or source for noise in the recording. iZotope and Genelec Support explain the possible sources of noise and the conditions that affect what you hear.

A shared desk

You need a setup that works in a small space or one that’s used by different people, and want to work quietly or use headphones when others are around. Genelec and Kali Audio offer guidance on positioning and adjusting placement, while Yamaha Europe and PreSonus describe connection and headphone options.

Using an existing audio interface

You already have an analogue audio source and want to choose inputs, pack size and positioning to suit it, rather than deciding solely on USB features. Product details from ADAM Audio, Genelec, Yamaha Europe and PreSonus describe different connection options and what’s included.

What to look for when buying

Priority What to check before buying Who it matters to
Spotting residual hiss Check the noise from your specific monitoring chain and the source at your intended listening position; compare the original and processed passage at the same volume. If I want to assess quiet passages without mistaking source or monitor noise for noise in the recording, I need to listen to the entire signal chain. Around 33 % of consumers put distinguishing residual hiss from system noise first.
Fitting monitors into a small space Measure the space available for two monitors and their positioning; if the setup might move, check whether suitable placement adjustments are available. If I share my desk or need to change the setup, I need to be able to recreate a position that works for listening. Around 27 % of consumers prioritise the space available for their monitors.
Being considerate of others Check for a headphone socket and a way to switch between headphones and speakers; take background noise in your workspace into account. If other people are working in the same space, I want to check quiet passages privately without disturbing them with speakers. Around 27 % of consumers prioritise working without disturbing others who share their space.
Connections and what’s included Match your computer or interface output to the model’s input; check whether the offer includes one monitor or a pair. If I want to keep using my existing outputs and connect a complete stereo setup, the inputs and number of monitors need to suit my setup. Around 13 % of consumers focus on connections and what’s included.

Common buying mistakes

  • Assuming every hiss is tape noise left in the recording

    Active speakers and other parts of the signal chain can make noise independently of the audio material. That can lead you to wrongly attribute it to the recording.

    First, listen to the signal chain switched on, with no recording playing. Then compare a known silent passage in the original and processed versions at the same volume, and check the source and monitors separately.

    Misjudging the noise can lead to unnecessary changes to the denoising or replacing equipment without fixing the actual source of the noise.

  • Using maximum power or bass figures to judge noise detail

    Maximum SPL and frequency response limits don’t tell you how noticeable a particular model’s own noise will be when you’re listening up close.

    Check the conditions behind the technical specifications, then listen to the specific model with your own material in the position where you plan to use it.

  • Confusing a single monitor with a stereo pair

    Genelec states that the 8010A is supplied as one monitor per pack. You’ll therefore need two monitors for a stereo setup.

    Before buying, check the number of monitors, the outputs available and the cables you’ll need.

    A stereo setup requires a second monitor and, where necessary, suitable cables.

  • Treating room adjustment as a one-off setting

    Reflections and the stereo image depend on the actual positions of your monitors. Their placement may change on a shared desk.

    After moving them, point the monitors towards your listening position again and check the right settings for their new position.

Key brands at a glance

Genelec

The compact 8010A may suit a workspace with limited room and a compatible XLR signal chain.

  • Genelec says the 8010A has an XLR input and is sold individually, so you’ll need to allow for two monitors for stereo.
  • Genelec’s general explanation of self-noise describes possible listening conditions, but isn’t a measurement of the 8010A. Hiss may be audible at close range in a quiet environment.

ADAM Audio

The D3V is an active desktop stereo system for a computer-based workspace, with USB-C or balanced TRS connectivity.

  • ADAM Audio lists USB-C and two balanced TRS connections as inputs.
  • Its connection options and advertised power or bass figures don’t show how well you’ll hear faint traces of tape hiss. Check the self-noise of the specific system.

Kali Audio

According to the manufacturer, the LP-UNF is designed for desktop mixing and different positions on or behind a desk.

  • Kali Audio describes settings for placing the monitors on a desk, on stands or close to a wall.
  • The claims about stereo imaging come from the manufacturer and aren’t based on an independent comparison test. It’s worth listening again after moving the monitors.

Yamaha

The compact HS3 pair combines analogue connections with a front-mounted headphone socket and room and high-frequency adjustment options.

  • Yamaha Europe gives the HS3 frequency response as 85 Hz to 20 kHz at −3 dB and 70 Hz to 22 kHz at −10 dB.
  • The two frequency response ranges use different reference levels, so they aren’t directly comparable. These figures don’t provide a model-specific self-noise measurement.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue pair for a workspace where you regularly switch between speakers and headphones.

  • PreSonus lists a front-mounted headphone output, balanced TRS inputs, and unbalanced stereo and RCA inputs.
  • The manufacturer’s claims about detail aren’t an independent measurement of how well the monitors reveal subtle denoising artefacts; they don’t establish that the system has particularly low self-noise.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

How can I tell whether a hiss is coming from the recording or the monitoring setup?

First, listen to the signal chain switched on, with no recording playing, from your intended listening position. Then compare a known silent passage in the original and processed versions at the same volume, and check the source and monitors separately. Genelec points out that both active speakers and the source can produce hiss.

How should I position studio monitors on a shared desk?

Point both monitors towards a consistent listening position and keep the distances as symmetrical as possible. Genelec recommends an equilateral triangle for stereo as the ideal; on a shared desk, this is a useful guide rather than a requirement for every setup. After changing their position, check their alignment and the appropriate room settings again.

Do I need to turn the speakers up especially loud for a reliable denoising check?

No. A high advertised maximum power rating doesn’t show that faint traces of tape hiss will be easier to hear. Compare at a consistent level that’s suitable for your workspace, and take into account fan and computer noise, as well as the self-noise of your monitoring chain.

What should I check about the number of monitors, returns and guarantees?

First check whether the offer includes one monitor or two: Genelec lists the 8010A as one monitor per pack. For online purchases made by consumers from a business seller, you generally have a 14-day right to cancel from the date you receive the goods; the seller must tell you in advance about any return costs. Your Europe also explains that consumers have a statutory minimum two-year guarantee. This is separate from a voluntary manufacturer’s warranty and shouldn’t automatically be assumed to apply to business purchases alone.

What should I know about product labelling and disposal in Germany?

The Bundesnetzagentur includes CE marking, product identification and correct manufacturer details among the matters covered by its market surveillance. Old electrical appliances must be collected separately and, according to the Umweltbundesamt, can be handed in free of charge at municipal collection points, among other options.