Which setup is right for you?

Mixing vocals from a fixed listening position

If you regularly compare lead and harmony vocals in stereo, you should be able to angle both speakers towards your listening position. Genelec recommends a symmetrical layout, with the monitors at a 60° angle to each other.

Producing with a crowded desk

If your screen and equipment leave little room, consider a compact stereo pair and measure the space available for both cabinets. IK Multimedia describes the iLoud Micro Monitor as a stereo pair.

Mixing in a challenging room

If you can’t easily rearrange your home studio, consider speaker positioning and possible room correction together. Manufacturer features are no substitute for suitable placement.

What should you look for when buying?

Buying consideration What to look for Who should consider it?
Vocal balance and stereo positioning Check that you can position both speakers evenly around your listening position. Genelec recommends a 60° angle between the monitors for stereo listening. If I want to compare lead and harmony vocals on the left and right, I need a reliable stereo listening position. Around 31% of consumers put vocal balance first.
Space for the stereo pair Measure the space needed for both speakers, including their positioning and connections. Check the dimensions and box contents for the specific version. If my desk has little space left after my screen and equipment, I need to be able to fit both cabinets comfortably. Around 25% of consumers prioritise available desk space.
Room and positioning Factor in the walls, desk and listening position when planning your setup. Check which controls or calibration features the specific version offers, and what accessories they require. If I can’t easily change my listening position, I want to take the effects of the room into account when positioning my speakers and choosing any available adjustments. Around 25% of consumers prioritise managing the effects of the room.
Connections and complete setup Match your audio source’s outputs to the inputs on both speakers. Also check the number of speakers and what’s included, as well as what you need for any calibration you want to carry out. If I want to check before buying that the setup is complete and works with my audio source, the number of speakers, connections and any extra accessories are crucial. Around 19% of consumers prioritise a complete setup.

Which buying mistakes should you avoid?

  • Assuming a single boxed monitor is a complete stereo pair

    For stereo, you need two speakers that can be positioned and connected appropriately. What’s included in the box varies between manufacturers.

    Before you buy, check the number of speakers and what’s included with the specific version.

    You may need to buy a second speaker and suitable cables separately.

  • Comparing low-frequency limits with different measurement references

    ADAM Audio quotes 45 Hz at −6 dB for the T5V; Yamaha gives 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5. These figures use different measurement references, so they don’t provide a straightforward basis for ranking the monitors.

    Check the dB reference alongside each manufacturer’s figures, and base your decision on your actual listening position.

  • Assuming a calibration feature means you have everything needed to calibrate

    IK Multimedia lists a measurement microphone for the pair version of the iLoud Micro Monitor Pro. Neumann’s MA 1 also requires, among other things, an MA-1 measurement microphone and a compatible audio interface.

    Check the exact version and what’s included against the requirements of the calibration system.

    Depending on the system, you may need to buy a measurement microphone or compatible audio interface separately.

Key brands to consider

Yamaha

The HS series is worth considering if you’re looking for active nearfield monitors with analogue connections and manual adjustment options.

  • Yamaha lists ROOM CONTROL, HIGH TRIM, XLR and 6.3-mm jack inputs for the HS5.
  • The HS5 is sold individually. Don’t assume the features and frequency specifications of this version also apply to other HS models without checking.

ADAM Audio

The T5V is an active 5-inch nearfield monitor that could suit a compact listening setup.

  • ADAM Audio gives the T5V a frequency range of 45 Hz to 25 kHz at −6 dB.
  • Allow for the rear-facing bass-reflex port when positioning the monitor. The manufacturer’s specifications alone don’t prove it’s better suited to mixing vocals.

IK Multimedia

The iLoud Micro Monitor is described as a stereo pair for compact desk setups; calibration options for the iLoud Micro Monitor Pro depend on the model.

  • IK Multimedia lists ARC X and a measurement microphone for the Pro pair version.
  • Check the version, number of speakers and what’s included rather than assuming accessories come with it based on the model name alone.

Neumann

The KH 120 II is worth considering for nearfield listening, with the option of MA-1 room correction.

  • Neumann lists DSP support and MA-1 compatibility, along with a recommended listening distance of 1–2 m.
  • MA 1 requires additional compatible equipment. A calibration feature doesn’t prove that every room issue will be fixed.

JBL

The 305P MkII is an active 5-inch monitor with adjustment options and analogue connections.

  • JBL lists Boundary EQ, a three-position HF Trim, and XLR and 6.3-mm TRS inputs.
  • How well it works for mixing vocal harmonies also depends on how it fits on your desk.

Matching products on Joybuy

Matching products coming soon.

Frequently asked questions

Do I need two monitors to mix vocal harmonies in stereo?

For stereo playback through speakers, you need one speaker on the left and one on the right. Yamaha lists the HS5 as individually boxed, while IK Multimedia describes the iLoud Micro Monitor as a stereo pair. Position both speakers as symmetrically as possible around your listening position.

Can room correction make up for a poor desk position?

No. First, plan for the best, most symmetrical positioning you can manage. Manufacturers offer model-specific adjustments; Neumann’s MA 1, for example, requires an MA-1 measurement microphone and a compatible audio interface. Room correction alone won’t necessarily resolve every room or positioning issue.

What should I check if something breaks or I need extra accessories?

For monitors sold individually, check whether you’ll need two speakers, suitable cables or calibration accessories. In Germany, the Verbraucherzentrale distinguishes between your statutory rights against the seller and a voluntary manufacturer’s warranty. Make sure you understand the specific terms and conditions.

What does CE marking mean for active studio monitors in Germany, and how should I dispose of old equipment?

CE marking is required for products covered by relevant harmonised EU legislation. It declares the manufacturer’s conformity; it isn’t an independent sound quality test. The German Environment Agency (Umweltbundesamt) advises that waste electrical equipment must be collected separately from unsorted municipal waste.