Who is a switch in a student room suitable for?

Students with a hall network connection

If you want to provide Wi-Fi through the LAN socket in your room, first check which types of device are permitted and how to register them in your accommodation. Studierendenwerk OstNiedersachsen recommends using an access point with its connection.

Users of a PoE access point

If you want to power the access point through its network cable, the PoE standard and power requirements of the device must match the power available per port and the switch’s total power budget.

Students with several LAN devices

If you want to connect other devices by cable as well as the access point, count the uplink, access point and all additional devices when working out how many ports you need.

What should you look for when choosing one?

First check your accommodation’s requirements and the access point’s power needs. Then consider how many LAN ports you need and whether you actually need to configure the switch.

Criterion What to check before buying Who should consider this?
Hall network connection Check whether you can connect an access point to a switch and which registration process or network devices are required. If I want to use Wi-Fi through the connection in my hall room, I first check whether my combination of devices is allowed. Around 36% of consumers prioritise connection compatibility.
PoE power supply Compare the access point’s PoE standard and power requirements with the power available per port and the switch’s total power budget. If I want my access point to receive both data and power through the same Ethernet cable, the PoE output must meet its power requirements. Around 29% of consumers prioritise PoE power.
Ports and speed Count the uplink, access point and any other devices; check the supported speed of every connection involved. If I’m connecting a computer or other devices by cable as well as the access point, I need enough spare ports. Around 21% of consumers prioritise extra LAN ports.
Noise and setup Check whether the model is fanless and whether plug-and-play operation or extra management features suit your needs. If the switch is near my desk or bed, I look for a fanless model and want to avoid unnecessary setup. Around 14% of consumers prioritise quiet, straightforward operation.

Which buying mistakes should you avoid?

  • Buying a switch instead of a router when a router is required

    A switch provides Ethernet connections, but it doesn’t automatically perform the same functions as a router. Requirements vary between student accommodation providers: the Netz-AK of Studierendenwerk Tübingen-Hohenheim distinguishes between an access point and a router, while Studentenwerk Leipzig sets out its own network access requirements.

    Before you buy, check the latest connection and usage guidance for your accommodation.

  • Confusing per-port power with the total PoE budget

    For the D-Link DGS-1005P, the manufacturer specifies up to 30 W per PoE port and a shared budget of 60 W. Powering several devices must stay within both limits.

    Check the standard and power requirements of every planned PoE device against both the individual port limit and the total budget of the specific switch.

  • Counting every listed port as an available device connection

    You’ll need one port for the uplink to the hall network and another for the access point. These ports won’t then be available for other devices.

    Count the uplink, access point and additional LAN devices separately. With a five-port model, you’ll have three ports free after connecting the uplink and access point.

Which brands are worth considering?

TP-Link

Worth considering for simple Gigabit switches without PoE, as well as PoE+ models such as the TL-SG1005P.

  • TP-Link Germany describes the TL-SG105 as fanless and requiring no switch configuration. According to the manufacturer, the TL-SG1005P is compatible with IEEE 802.3af/at and supports up to 30 W per PoE port.
  • Published figures for the TL-SG1005P’s total PoE budget are not always consistent. If you plan to power several PoE devices, check the hardware version against its corresponding datasheet.

D-Link

The DGS-1005P is a compact PoE+ switch worth considering for a compatible access point and other LAN devices.

  • D-Link’s datasheet lists five Gigabit ports, four PoE ports, up to 30 W per PoE port, a total budget of 60 W and fanless operation for this model.
  • The shared PoE budget limits how many devices can be powered at the same time.

NETGEAR

The GS305EP is an option if you need to configure the switch as well as use PoE+.

  • NETGEAR lists five Gigabit ports, four PoE+ ports, a total budget of 63 W, and VLAN and PoE settings managed through an interface for the GS305EP.
  • If you’re connecting just one access point and don’t need extra configuration, these management features aren’t a proven advantage.

Zyxel

The GS1005HP is another unmanaged PoE+ option for a compatible access point.

  • Zyxel lists five Gigabit ports, four of which are PoE ports, support for IEEE 802.3af/at, a total budget of 60 W and fanless operation for the GS1005HP.
  • For a specific offer, check that the model and what’s included meet your needs.

Joybuy products for extra LAN ports

This selection features Gigabit switches that give you extra LAN ports. If your access point needs PoE, check the individual model carefully to make sure it provides PoE to connected devices.

Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU, 5-port Gigabit managed Ethernet switch

Ubiquiti UniFi Switch Flex Mini USW-FLEX-MINI-EU

Suitable if you need several Gigabit Ethernet connections and power the access point separately; this switch’s PoE connection is an input and does not supply power to connected devices.

Five 10/100/1000-Mbit/s ports; the switch is powered via USB-C or IEEE 802.3af/at PoE.

View at Joybuy
D-Link DGS-1005P/E Gigabit desktop switch with four PoE+ ports

D-Link DGS-1005P/E, 5-port Gigabit switch

Suitable if your access point supports IEEE 802.3af/at PoE+ and you want to power it through the network cable.

Five Gigabit ports, including four PoE+ ports; shared PoE budget: 60 W.

Powering several PoE devices must stay within the total budget.

View at Joybuy
D-Link DGS-1210-10/E smart managed Gigabit switch with 10 ports

D-Link DGS-1210-10/E, 10-port Gigabit smart managed switch

Suitable if you want to connect several other devices by cable as well as your access point.

Eight Gigabit RJ45 ports and two SFP slots; web-based management.

View at Joybuy
TP-Link TL-SG1005D Gigabit desktop switch with five ports

TP-Link TL-SG1005D, 5-port Gigabit switch

Suitable if your access point has a separate power supply and you want to connect additional wired devices.

Five 10/100/1000-Mbit/s RJ45 ports; fanless operation and plug-and-play setup.

View at Joybuy
TP-Link TL-SG105PE Easy Smart switch with five Gigabit ports and four PoE+ ports

TP-Link TL-SG105PE, 5-port Gigabit Easy Smart switch

Suitable if your access point supports IEEE 802.3af/at PoE+ and you also need VLAN or QoS settings.

Four PoE+ ports; shared PoE budget: 65 W. Supports VLAN, QoS and IGMP Snooping.

View at Joybuy

Frequently asked questions

Can I simply split the hall network connection between a switch and an access point?

Not in every hall. Studierendenwerk OstNiedersachsen recommends an access point for its connection, while the Netz-AK of Studierendenwerk Tübingen-Hohenheim distinguishes between a router and a standalone access point. Your accommodation’s current rules are what matter, including registration requirements and which devices are allowed.

How do I connect the switch and access point?

If your accommodation allows this setup, run an Ethernet cable from the network socket or designated uplink to the switch, then run another cable to the access point. Set up the access point according to its instructions and your accommodation’s rules; plug-and-play on the switch doesn’t replace these steps.

What power supply do I need for the access point?

A PoE switch can power a compatible access point through the Ethernet cable, as long as the standard, power per port and total budget are sufficient. If your switch doesn’t provide PoE output, the access point will need another suitable power supply. Also check which power supplies are included with each device.

Do I need special permission to use Wi-Fi in my hall?

General Wi-Fi frequency allocations don’t automatically allow you to use an access point in a way that goes against your hall’s rules. The Bundesnetzagentur lists Wi-Fi frequency bands at 2.4 and 5 GHz; whether and how you can connect and register an access point is also subject to your accommodation’s requirements.