Which setup is right for you?

Stereo mixing at a small desk

If you mainly mix existing theatre audio tracks on your own, straightforward connections to headphones and monitors matter more than having as many recording inputs as possible.

Cue and multichannel checking

If you need to check what’s coming through separate physical outputs, both the interface and your software’s audio output need to be set up correctly.

Mixing and recording additional audio

If you also record speech, sound effects or instruments, distinguish microphone preamps from line inputs and count how many connections you’ll need to use at the same time.

What should you look for when buying?

First, decide whether you just need one shared stereo monitoring setup or want to send theatre cues to separate outputs.

Priority What to check when buying Who is this especially important for?
Stereo through headphones and monitors Headphone and monitor connections, as well as signal routing and level control. Focusrite says the headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal. If I’m mixing existing tracks on my own through headphones and monitors, I want one straightforward, shared stereo monitoring setup. Around 28% of consumers put this simple monitoring option first.
Separate theatre cues Independently addressable physical outputs and how they’re assigned in your software. Focusrite lists four line outputs for the Scarlett 4i4 4th Gen; MOTU lists four jack line outputs for the M4, while its RCA outputs mirror them. If I need to check individual cues through different outputs, I make sure each route can genuinely be assigned separately. Around 22% of consumers prioritise separate outputs for multichannel cues.
Computer and desk space Operating system and USB requirements, the exact model’s power requirements, and space for plugs and cables. Focusrite specifies USB power requirements and an additional power connection for the Scarlett 4i4 4th Gen. If I have a small desk and switch between computers or workstations, I want to be able to connect everything without awkward workarounds. Around 22% of consumers prioritise compatibility with their computer and available space.
Additional recording Count the microphone inputs you can use at the same time, separately from line inputs, and consider the sources you plan to connect. If I want to record speech or sound effects as well as the soundtrack, I need suitable microphone inputs, not just extra line connections. Around 17% of consumers prioritise this kind of additional recording.
Cost and after-sales service Decide which features you need, then check the seller, returns information and warranty terms before ordering. If I want to keep costs under control and consider what happens after the purchase, I compare the features I need first. Around 11% of consumers put cost and service first.

Common buying mistakes

  • Assuming the headphone socket is an independent cue output

    Focusrite says the headphone and line outputs on the Scarlett 2i2 4th Gen carry the same signal. So, in this case, a separate socket doesn’t mean you get a separate mix.

    Check the documented signal routing against your cue plan rather than simply counting the sockets you can see.

  • Counting mirrored connections as extra channels

    MOTU says the RCA outputs on the M4 mirror its jack outputs; they aren’t extra, independently addressable outputs.

    Only count outputs you can assign separately for your cue plan.

  • Assuming a USB-C connector guarantees sufficient power

    For the Scarlett 4i4 4th Gen, Focusrite specifies requirements for its USB-C data and power connection, as well as an additional power connection.

    Before buying, check these requirements against the computer or hub you’ll use, and make sure you have enough room for the cables.

  • Confusing statutory consumer rights with a voluntary warranty

    For eligible consumer purchases from retailers, your statutory rights against the seller are separate from any additional voluntary manufacturer’s warranty. EU consumer information explains the minimum legal guarantee for these purchases.

    Check the seller and warranty terms separately, and keep your proof of purchase.

Key brands at a glance

Focusrite

The Scarlett 2i2 4th Gen is suited to shared stereo monitoring; consider the Scarlett 4i4 4th Gen if four line outputs and separate monitoring mixes matter to you.

  • Focusrite lists four line outputs and separate mixes for the headphone and line outputs on the Scarlett 4i4 4th Gen.
  • The headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal. For the 4i4, you should also check its stated power requirements against your computer.

MOTU

The M4 is worth considering if four analogue line outputs and easy-to-read level meters suit your workspace.

  • MOTU lists four balanced jack line outputs and USB bus power.
  • The four RCA outputs mirror the jack outputs. The latency quoted by the manufacturer applies to its specific test conditions and isn’t a general benchmark for comparison.

Audient

The iD14 MKII may suit you if you’re interested in adding digital expansion later via a suitable connection, as well as mixing.

  • Audient describes the iD14 MKII as having a digital connection for expansion.
  • Digital expansion doesn’t automatically mean extra built-in microphone preamps. Audient specifies a minimum requirement of 0.9 A at 5 V from a suitable USB 3.0 port for the iD14 MKII; specifications for other iD14 versions shouldn’t be assumed to apply.

RME

The Babyface Pro FS and TotalMix FX are worth considering for workflows that need different monitoring and output mixes.

  • RME describes the Babyface Pro FS as bus-powered and TotalMix FX as routing software for creating mixes across different outputs.
  • Extra routing takes time to set up and isn’t necessary for every stereo mix.

Solid State Logic

The SSL 12 is designed for desktop workflows that use alternative monitor functions and multiple monitoring mixes.

  • Solid State Logic describes this model as offering assignable monitor functions and independent headphone mixes.
  • If you only need one stereo output, weigh the benefits of the extra features against the space they take up and the effort required to set them up. Manufacturer descriptions of sound quality aren’t independent comparisons.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need as many microphone inputs as possible to mix existing theatre tracks?

No. First decide which monitoring and cue outputs you need. Extra microphone inputs matter if you also want to record new sources; on the Scarlett 4i4 4th Gen, two of the additional inputs are line inputs.

How do I check output assignments before a cue rehearsal?

In the software you’re using, assign each cue you need to its intended physical output, then test each route individually. If you’re using QLab 5 with a suitable audio or bundle licence, you can do this in the Audio Output Patch Editor.

What should I check when setting up at different workstations?

Check the requirements for the exact interface model against the operating system, USB connection and power supply of the computer you’ll be using. For the Scarlett 4i4 4th Gen, Focusrite specifies 1.5 A at the USB-C data and power connection, as well as an additional power connection.

What are my rights in Germany if a product is faulty or I want to cancel an online purchase?

For a consumer purchase of new goods from a retailer, EU consumer information states that the minimum statutory guarantee is two years from the date you receive the goods; this is separate from any voluntary manufacturer’s warranty. Many online consumer purchases generally come with a 14-day right to cancel, although exceptions and the specific contract must be taken into account. This information doesn’t apply universally to private or business purchases.

Is a CE mark an independent quality seal for sound?

No. A CE mark doesn’t compare the audio quality of individual interfaces. The Bundesnetzagentur lists correct labelling, manufacturer information and required German-language instructions among the points it checks when monitoring the market.