Which connection setup is right for you?

Stereo mixer at your desk

If you mainly check existing theatre recordings on speakers and headphones, suitable monitoring connections and easy-to-manage level controls matter more than extra recording inputs. Focusrite describes the 4th-generation Scarlett 4i4 as offering separate mixes for headphones and line outputs.

Mixer with separate output paths

If your main mix, cue signal or other playback feeds need to run independently, plan the physical outputs you need and how they will be assigned in your DAW. Solid State Logic lists four balanced outputs and routing for the SSL 12, while RME also lists digital connections for the Fireface UCX II.

Mixer making their own overdubs

If you also want to record voices, instruments or line-level sources, count the inputs you need by source type. Focusrite and MOTU specify two microphone inputs and additional line inputs on their respective models, so the total input count is not the same as the number of microphone preamps.

What should you look for when buying?

First, decide which signals need to go to your speakers, headphones and any playback equipment at the same time. Then count the inputs and outputs you need, and check that your computer, operating system and DAW are compatible with the specific model.

What you need What to check before buying Who is it important to?
Stereo monitoring Check the monitor and headphone connections, as well as whether their levels can be controlled separately. Focusrite describes the 4th-generation Scarlett 4i4 as offering separate mixes for headphones and line outputs. If I mainly mix existing theatre recordings on speakers and headphones, I want to connect and control both monitoring paths as needed. Around 33% of consumers rank stereo monitoring as their top buying priority.
Separate outputs Check your signal plan against the connector types and DAW outputs that can be assigned independently. According to MOTU, the M4’s RCA outputs mirror its analogue outputs; they are not additional independent channels. If I need a separate cue or playback signal alongside the main mix, I want to make sure there’s a dedicated signal path for it. Around 25% of consumers prioritise separate output paths.
Computer and DAW Check the operating system version, required drivers, USB connection and power supply for the specific model. Focusrite specifies at least 5 V at 1.5 A for the 4th-generation Scarlett 4i4; Solid State Logic requires SSL 12 users on Windows to install a dedicated audio driver. If I mix on my existing home-office computer, I want to know that the interface, operating system and DAW will work together and that the required power supply is available. Around 25% of consumers put computer and DAW compatibility first.
Recording your own material Count the microphones, line-level sources and instruments you need to use at the same time, separately. Focusrite and MOTU specify two microphone inputs and two additional line inputs on their respective models; Solid State Logic lists four microphone preamps for the SSL 12. If I want to record my own voice or instruments alongside the theatre material, I need the right input for each source I’ll be using at the same time. Around 17% of consumers prioritise additional recording options.

Which assumptions should you avoid?

  • Assuming the total number of inputs equals the number of microphone inputs

    Focusrite and MOTU each list two microphone inputs and two additional line inputs for the 4th-generation Scarlett 4i4 and MOTU M4 respectively. So, in this case, four inputs does not mean you can connect four microphones directly.

    First count how many microphones you need to use at the same time. Then match your line-level and instrument sources to the right inputs on the exact model.

  • Assuming mirrored sockets are additional independent outputs

    MOTU describes the M4’s RCA outputs as mirrored analogue outputs. So, having extra sockets does not automatically give you more independent playback paths for your theatre setup.

    Check which signal each socket carries and whether its output can be assigned separately in your DAW.

  • Assuming a USB-C connector guarantees enough power

    Focusrite specifies at least 5 V at 1.5 A for the 4th-generation Scarlett 4i4. The connection needs to meet the power requirements for that specific model.

    Check the power available from the computer port you plan to use, and note the power supply option recommended for the model.

  • Treating digital channels as analogue outputs

    As well as analogue connections, the RME Fireface UCX II has digital interfaces such as ADAT, AES/EBU and S/PDIF. These are not interchangeable with analogue sockets.

    Before buying, note the required format, physical socket and matching connection for each signal path.

Which brands are worth considering?

Focusrite

The 4th-generation Scarlett 4i4 is worth considering for compact setups with monitor and headphone monitoring, plus occasional recording.

  • Focusrite lists four balanced line outputs, separate mixes for headphones and line outputs, two microphone preamps and two additional line inputs.
  • Focusrite specifies a power supply of at least 5 V at 1.5 A for the 4th-generation Scarlett 4i4. Its four inputs are not four microphone inputs.

MOTU

The M4 is an option for a compact setup with balanced line outputs and clear input and output metering.

  • MOTU lists four balanced TRS line outputs, two combo microphone and line inputs, and two additional line inputs.
  • According to MOTU, the RCA outputs mirror the analogue outputs; they are not four additional independent channels. Check the system requirements for the computer you plan to use, too.

Solid State Logic

The SSL 12 is worth considering for setups that need several monitoring or headphone paths, as well as extra recording inputs.

  • Solid State Logic lists four balanced outputs, two headphone outputs and four microphone preamps. Routing is handled through SSL 360°.
  • According to the manual, the dedicated audio driver is required on Windows. Also check that the switchable headphone and line functions suit your planned signal path.

RME

The Fireface UCX II could suit a more extensive analogue or digital studio setup, if your signal plan genuinely needs these connections.

  • RME lists analogue connections, ADAT, AES/EBU, S/PDIF and integrated routing for this model.
  • Digital channels are not additional analogue sockets. These features are only relevant if they suit your planned equipment or output setup.

Audient

The iD14 MKII is another compact option if two microphone inputs and several line outputs suit your setup.

  • Audient lists four line outputs, two microphone preamps and an ADAT input for the iD14.
  • The ADAT input does not expand the built-in microphone connections without suitable external hardware. Also check the USB power requirements for the specific MKII model.

Matching products on Joybuy

Matching products coming soon.

Frequently asked questions

Do I automatically need a multi-channel interface for a theatre soundtrack?

No. What matters is which monitoring and playback signals you physically need. A stereo mix has different requirements from separate output paths, and a high channel count alone does not tell you how many independent analogue outputs are available.

How do I set up additional outputs?

Connect the designated line outputs to suitable inputs on your monitoring or playback equipment, then assign the signals you want in the interface software and DAW. Check whether each output on the specific device carries its own channel or mirrors another signal; according to MOTU, the RCA outputs on the M4 are mirrored.

How many microphone inputs do I need to record my own overdubs?

It depends on how many microphones you want to connect at the same time. Count these separately from line-level and instrument sources: Focusrite and MOTU list two microphone inputs on their respective models, while Solid State Logic lists four microphone preamps for the SSL 12.

What should I check before connecting the interface to my computer?

Check that the specific model is compatible with your computer’s operating system, DAW, USB connection and power supply. Focusrite specifies at least 5 V at 1.5 A for the 4th-generation Scarlett 4i4; according to Solid State Logic’s manual, the SSL 12 requires its dedicated audio driver on Windows.

How do I clean a MOTU M-Series interface?

MOTU recommends disconnecting the device from your computer before cleaning it and using only a dry cloth. Do not use liquid or aerosol cleaners. For other models, follow the relevant manual.