Who scans theatre programmes?

Collectors of large programmes

If you want to capture large pages, inserts or spreads as completely as possible, compare the original with the usable scanning area. Canon gives the scan area for both the LiDE 300 and LiDE 400 as 216 × 297 mm; VIISAN describes the VF3240 as an A3 flatbed scanner.

Archivists of bound booklets

With lots of stapled programmes, text close to the spine may affect your choice. Plustek specifies a 2 mm book edge for the OpticBook 4800; a test scan will show whether the result is legible with your paper and binding.

Students building a searchable archive

If you want to find programme titles and text again later, check how to create searchable PDFs and test the text recognition on your own material. Plustek describes a workflow for searchable PDFs, while HP lists searchable PDF and PDF/A for the ScanJet Pro 2600 f1.

What should you look for?

Compact A4 flatbed scanner

A good fit if: the whole page you need fits on the scanning area and you’re scanning loose sheets or programmes one page at a time.

Trade-off: Larger pages or open spreads may need to be scanned in sections; bound booklets also need to lie flat enough.

Larger A3 flatbed scanner

A good fit if: the area you want to capture is larger than A4 but still fits within the stated scanning area.

Trade-off: Weigh the space required and the purchase price against fewer scans in sections. A larger glass bed won’t automatically eliminate shadows or distortion at the spine.

A4 book-edge scanner

A good fit if: you scan lots of A4 bound programmes and need to capture content close to the spine.

Trade-off: The book edge doesn’t increase the A4 scanning area; test how it captures the spine on a tightly bound booklet.

Flatbed scanner with document feeder

A good fit if: you regularly have lots of loose sheets suitable for the feeder, as well as bound booklets.

Trade-off: Bound programmes still need to be scanned on the flatbed; check that the feeder is suitable for delicate or unusual inserts.

Measure your largest original, including any borders you want to keep visible in the scan. The points below will help you choose the right format and balance spine legibility, searchability and the effort involved against the needs of your own archive.

What you need What to look for Who it matters to
Capturing larger formats in full Measure the largest original, including the borders you want, and compare it with the stated scanning area, not the scanner’s casing. If you want to lay a large programme or insert flat and capture it in full, the usable glass area matters. Around 33 % of consumers put capturing larger formats in full at the top of their list.
Legibility at the spine Test-scan a tightly bound programme and check the text at the spine, as well as the condition of the original. If you have lots of bound booklets, you’ll want to capture text close to the spine without putting unnecessary strain on the original. Around 25 % of consumers say bound programmes are their main requirement.
Searchable archive files Create a test PDF from a challenging page, search it for a word that actually appears in the text, and check the image. If you want to find programme content quickly later, you’ll need a reliable search workflow as well as the scanned image. Around 25 % of consumers prioritise being able to search the text later.
Time and space required Check the space needed with the lid open, as well as the power supply, connections and drivers for your computer. If you only scan programmes occasionally, the scanner and workflow should suit the space you have and your computer. Around 17 % of consumers prioritise occasional use and a space-saving design.

Common pitfalls

  • Assuming A3 means problem-free scanning at the spine

    A larger scanning area and a book edge address different needs. A larger glass bed alone doesn’t guarantee that text at the spine will be captured without shadows or distortion.

    First measure the area you need. For bound programmes, also test a typical page at the spine.

    Scanning in sections may mean repeatedly repositioning the pages and then joining the scans together.

  • Confusing scan time with the time needed to create a finished archive

    A manufacturer’s stated scan time describes one scan under specific conditions, not the full process of changing pages and checking the results.

    Try scanning several typical programmes and allow time to name, check and back up the files.

    Changing pages, naming files, checking OCR and backing up all add to the scanning time.

  • Assuming a PDF is automatically searchable

    A PDF made from scanned pages isn’t automatically searchable by programme text. Plustek and HP specifically list searchable PDF output or workflows.

    Before buying, check what software is included and test one of your own pages to see whether you can find a word in it.

    Without suitable text recognition, making your archive searchable later can mean extra work.

  • Assuming scanning gives you the right to share publicly

    Copyright law treats copies for personal use differently from use for teaching purposes. A school assignment doesn’t automatically mean you can make a full scan available to the public.

    Before publishing, check the rights to the specific programme and who will be able to access it. The applicable conditions and limits are set out in the relevant provisions of the German Copyright Act.

Key brands at a glance

Canon

The CanoScan LiDE 300 and LiDE 400 are A4 flatbed scanners for individual pages that fit their scanning area.

  • Canon gives the maximum scanning area for both models as 216 × 297 mm and specifies USB power.
  • For the LiDE 400, Canon lists PDF buttons and a Z-lid. These features don’t increase the A4 scanning area.

Epson

The Perfection V39II is an A4 photo and document scanner for individual originals and smaller workspaces.

  • Epson specifies a built-in stand and USB power.
  • Don’t assume that information about the older Perfection V39 also applies to the V39II without checking.

Plustek

The OpticBook 4800 is designed for bound A4 pages, while the OpticPro A320E is a larger flatbed scanner.

  • For the OpticBook, Plustek specifies a 2 mm book edge and a workflow for searchable PDFs. The company positions the OpticPro A320E for larger A3 originals.
  • Manufacturer claims about spine capture and image quality don’t guarantee the results you’ll get with every theatre programme.

VIISAN

The VF3240 is a large-format flatbed scanner for originals bigger than A4.

  • VIISAN describes the VF3240 as an A3 flatbed scanner and lists multipage PDFs.
  • The manufacturer’s stated scan time of four seconds applies to A3 colour at 200 dpi, not to other settings or the entire archiving process.

HP

The ScanJet Pro 2600 f1 combines a flatbed scanner with a document feeder.

  • HP lists searchable PDF and PDF/A as file formats.
  • The feeder doesn’t replace the flatbed for stapled programmes; HP gives the maximum flatbed scanning area as 216 × 297 mm.

Suitable products at Joybuy

Related products will be available soon.

Frequently asked questions

Is A4 big enough for an open theatre programme?

Only if the entire area you want to capture fits on the glass. Canon gives the maximum scanning area for both the LiDE 300 and LiDE 400 as 216 × 297 mm. So measure the open original, including any borders you want to keep in the scan.

How do I create a useful searchable archive?

Start with a test scan and check small text and the spine. If needed, save it as a searchable PDF and search for a word from the original. Also back up the finished files externally; Germany’s Federal Office for Information Security recommends making regular external backups.

Should I choose a more expensive scanner because it has a high dpi rating?

Not just because of a high dpi rating. What matters is whether you can capture your original in full and make it legible, with the file output you need. In its Practical Guidelines on Digitisation, published in 2016, the German Research Foundation gives 300 dpi based on the original format as a basic target resolution for its digitisation projects. This isn’t a mandatory minimum for a school project or buying a scanner.

What are my rights if my scanner is faulty?

For a consumer purchase from a business seller in the EU, you have at least two years of statutory legal protection from the seller, starting when you receive the goods. This is separate from any additional manufacturer’s guarantee. Also check that the drivers and software work with your computer’s operating system.

Can I publish entire scanned programmes online for my school project?

Not simply because it’s for a school project. Under Section 60a of the German Copyright Act (UrhG), non-commercial use to illustrate teaching is generally permitted, subject to certain conditions, for the purposes and groups of people specified there, up to 15 % of a published work; exceptions apply to certain types of work. Before making individual contributions, images or a specific programme available to the public, you’ll need to check whether the rules apply, taking into account the content, rights and how it will be used. Section 53 of the German Copyright Act deals separately with private or personal copies and doesn’t give blanket permission to publish them. The relevant provisions are set out in the German Copyright Act, available via Gesetze im Internet from the Federal Ministry of Justice.