Collectors with a small desk
If you mainly scan individual programmes, make sure there’s room on your desk for the scanner, its cables and the lid when open. A compact A4 model could be a good fit, provided your originals fit fully on the scan bed.
For loose programmes, or those that can be laid down without putting them under strain, a compact A4 flatbed scanner is a sensible starting point, as long as the pages fit on the scan bed. If there’s text close to a fixed binding, look for a model that specifically features a book edge: Plustek lists a 2 mm book edge for the OpticBook 4800, while Avision says the FB2380E can scan as close as 2 mm to the book spine. For larger fold-out pages or inserts, the actual dimensions of the originals and the scanner are what matter. Check the condition of the original, computer compatibility and scan results with a test scan, too.
If you mainly scan individual programmes, make sure there’s room on your desk for the scanner, its cables and the lid when open. A compact A4 model could be a good fit, provided your originals fit fully on the scan bed.
If you want to read names or notes near the fold without pressing a delicate binding flat, compare the book-edge design and try it with a typical original. The Library of Congress recommends taking potential damage and binding limitations into account when planning a scan.
If you want to capture unfolded pages or inserts in a single pass wherever possible, compare their dimensions with the scan bed and make room for a larger scanner. Plustek lists a maximum scan area of 297 × 431,8 mm for the OpticSlim 1180.
First, measure the largest unfolded page and check that it fits on the scan bed, including any important margins. Then consider the binding, storage and how you’ll use the scanner with your existing computer.
| What matters | What to check before buying | Who should pay particular attention? |
|---|---|---|
| Format and desk space | Measure the largest original in both directions; compare the scan bed and scanner dimensions, and allow room for the lid to open. | If I want to capture full pages despite having limited desk space, both matter: around 36% of consumers put format and space requirements first. |
| Fold and protecting the original | Check the binding and how far it opens; don’t assume a Z-hinge or lifting lid is the same as a book-edge design. | For firmly bound programmes, I want to capture text at the fold without straining the original. Around 28% of consumers prioritise legibility at the fold and careful handling. |
| Finding items in your archive | Check whether the software creates searchable PDFs; use a test scan to check names and page order. | If I want to find performances and names again later, being able to search my scans is essential. Around 18% of consumers put this first. |
| Connection and workflow | Check the drivers for your operating system, power supply and desired file formats for the exact model. | My scanner needs to work with my existing computer and be practical to use regularly. Around 18% of consumers prioritise connectivity and scanning workflow. |
What matters is the usable scan area compared with the unfolded original, not just the scanner’s format label.
Before buying, measure the largest page in both directions and compare the dimensions with the stated scan area.
If a page won’t fit in a single pass, you may need to make several partial scans and piece them together, which can take extra time.
Canon lists a Z-hinge for the CanoScan LiDE 400. By contrast, Plustek and Avision describe book-edge designs on certain other models. These features aren’t the same.
If text near the fold matters, check the design of the specific model and whether you can position your programme without putting it under pressure.
A software feature alone doesn’t tell you whether names will be recognised reliably in your particular programme layout.
Make a test scan of several pages and check the page order and search results.
With a larger archive, you may need to spend time checking, correcting and sorting your files.
The CanoScan LiDE 400 is an A4 flatbed scanner for programmes placed on the scan bed one at a time.
The Perfection V39II is an A4 flatbed scanner for photos and documents where desk space is limited.
The OpticBook 4800 and OpticSlim 1180 cater for different types of originals.
According to the manufacturer, the VF3240 is an A3 flatbed scanner with multi-page PDF features.
The FB2380E has a book-edge design; the FB10 is a separate, slim A4 model.
Only if you want to capture the whole page in a single pass. Measure the unfolded original, including any important margins, and compare both dimensions with the usable scan area: Canon Germany lists 216 × 297 mm for the LiDE 400, while Plustek gives the OpticSlim 1180 a maximum of 297 × 431,8 mm.
Before scanning, check that you can open and lay the programme down safely. Don’t press a binding flat if it resists. The Library of Congress identifies restricted bindings and potential damage as factors to consider when assessing preservation; its guidance isn’t a requirement for private collectors.
No. A high stated optical resolution alone doesn’t guarantee successful text recognition. Check whether the software for the specific model creates searchable PDFs, then search for typical names in a test scan. Plustek describes this feature in its software.
Compare the driver list for your operating system with the full model name, and check the power supply. Canon describes the LiDE 400 and Epson the Perfection V39II as USB-powered models; for the larger OpticSlim 1180, Plustek lists a separate power supply.
Owning a printed programme doesn’t automatically give you the right to publish protected text or images. The German Patent and Trade Mark Office distinguishes reproduction and making works publicly available online as rights of exploitation. Before publishing, check the rights to the specific content and make sure you have the appropriate permission.