Which monitoring setup suits you?

For stereo mixers at a fixed desk

If you’re delivering a stereo soundtrack, you need a consistent listening position where you can judge balance and stereo imaging. Genelec recommends placing the two monitors as symmetrically as possible around the listening position.

For multichannel mixers working to a format specification

If your brief requires separate channels, first confirm the delivery format and the monitoring channels and outputs it requires. Dolby Professional sets out specific requirements for the mix room and its certification for theatrical Dolby Atmos.

For mixers working with critical low-frequency effects

If low-frequency effects are important, you need to assess how the speakers and room work together at the listening position. Genelec highlights the importance of matching the subwoofer, crossover frequency and phase as part of bass management.

What to consider when buying

Confirm the delivery format, listening position and signal path before comparing individual frequency specifications or cabinet sizes.

Buying criterion What to look for Who it matters most to
Positioning and stereo imaging Measure the space available and your listening distance. Check whether both monitors can be aimed as symmetrically as possible towards your listening position. For stereo, Genelec recommends an equilateral listening triangle, with a 60° angle between the monitors. If I mix at a fixed desk, I need a symmetrical, consistent listening position; around 36% of consumers say positioning is their top priority.
Delivery format and channels Check whether the brief calls for stereo or a specific multichannel format, then count the monitoring channels and outputs you’ll need. A stereo pair won’t reproduce separate surround channels directly. If my brief requires separate channels, my entire monitoring chain needs to support them; around 29% of consumers put delivery format first.
Bass in the room Only compare frequency specifications that use the same dB reference: ADAM Audio quotes 39 Hz at −6 dB for the T7V, while Neumann quotes 44 Hz at ±3 dB for the KH 120 II. If you’re adding a subwoofer, factor in its position, crossover frequency, level and phase. If low-frequency effects are crucial to my mix, I need to assess the bass at my actual listening position; around 21% of consumers say bass control is their top priority.
Connections and system requirements Match your audio source’s outputs to the inputs on the specific model, and check the quantity supplied and included accessories. For calibration with Neumann MA 1, the manufacturer specifies, among other things, a measurement microphone and a suitable interface. If I want to keep using my existing equipment, the signal path needs to work with the complete setup; around 14% of consumers prioritise connections and system requirements.

Common misconceptions

  • Comparing bass limits on spec sheets at face value

    Frequency specifications with different dB references don’t describe the same measurement limit. The room also affects what you hear at the listening position.

    Only compare figures that use the same measurement reference, and check your monitors in the position where you plan to use them.

  • Assuming a single monitor is a complete stereo pair

    Genelec states that the 8030C comes with one monitor. For stereo, you’ll need two.

    Check the quantity and accessories included with the specific product listing.

    If the monitor is sold individually, remember to budget for a second one, as well as suitable cables and space to position them.

  • Expecting a subwoofer to guarantee accurate bass

    Positioning, room modes and how the subwoofer is matched to the main monitors all affect the bass at the listening position.

    Plan the crossover frequency, level and phase as part of the whole system, then check the result from your listening position.

    Setting up a subwoofer requires extra planning for its position and integration with your monitors.

  • Thinking room correction can make up for poor positioning

    Calibration doesn’t remove the importance of speaker placement. For optional calibration with Neumann MA 1, Neumann also specifies certain requirements for the microphone and interface.

    Plan your listening position and monitor placement first. Then check that your equipment supports the calibration solution you want to use.

    Neumann MA 1 may also require a compatible measurement microphone and a suitable interface.

A guide to key brands

Neumann

Neumann says the KH 120 II is designed for nearfield applications, with a recommended listening distance of 1–2 m.

  • For the KH 120 II, Neumann lists analogue and S/PDIF connections, and a frequency response of 44 Hz–21 kHz at ±3 dB.
  • Optional calibration with MA 1 requires, among other things, a compatible measurement microphone and a suitable interface.

Genelec

The 8030C is an active nearfield monitor sold individually, with room-compensation switches on the rear.

  • Genelec lists dimensions of 299 × 189 × 178 mm with the Iso-Pod, and a frequency range of 47 Hz–25 kHz at −6 dB.
  • Genelec states that the box contains one monitor, so you’ll need two for stereo.

ADAM Audio

The T7V is an active nearfield monitor with a 7-inch woofer and a rear-firing bass reflex port.

  • ADAM Audio lists a frequency range of 39 Hz–25 kHz at −6 dB for the T7V.
  • Allow for the rear-firing bass reflex port and the cabinet’s footprint when positioning the monitor. The manufacturer’s specification doesn’t show how the bass will sound at your listening position.

Kali Audio

Kali describes the LP-UNF as an ultra-nearfield stereo system for desktop mixing.

  • Kali lists USB-C, TRS and RCA inputs, plus several presets for desk and wall placement.
  • The manufacturer’s specifications distinguish between 39 Hz at −10 dB and a ±3 dB range that starts at 54 Hz.

Suitable products at Joybuy

Related products will be available soon.

Frequently asked questions

Is a stereo pair enough for every theatrical soundtrack?

No, not if you need to assess separate multichannel audio. A well-positioned stereo pair helps you make decisions for a stereo delivery format, but it won’t reproduce surround channels directly.

How should I position two monitors in my home studio?

Aim both monitors towards your listening position, and try to keep them at the same height and at symmetrical distances. For stereo, Genelec recommends an equilateral listening triangle, ideally with a 60° angle between the speakers. Check what you can achieve in your own room.

What should I check about connections and optional calibration?

Compare your audio source’s outputs with the inputs on the specific system. For Neumann MA 1, Neumann specifies, among other things, a measurement microphone, a suitable microphone input with 48 V phantom power, and enough audio outputs for the active channels.

Can I judge the bass range by looking at the lowest frequency specification?

Not on its own. Check the dB reference used for the manufacturer’s specification, and remember that your room and monitor placement affect what you hear at the listening position.

Are studio monitors alone enough for theatrical Dolby Atmos?

No. To access the software for mixing and mastering theatrical Dolby Atmos, Dolby Professional describes a mix-room certification process with technical requirements. This applies to that specific format; it isn’t a general requirement for every theatrical soundtrack.