Who is this relevant to?

Viewers in rooms behind thick walls

If playback keeps stalling in a particular spot, check the signal there rather than choosing a router based solely on its highest advertised data rate.

Households with a possible wired connection

If you can run a cable to your TV or an access point, you can avoid making the connection between rooms depend on a weak Wi-Fi signal all over again.

Households considering a new router

If you want to replace your main router, the new device must be compatible with your DSL, cable or existing modem connection.

What should you look for when buying?

First, check the connection where you watch and plan how data will reach the room. Only then can you decide whether a different router, an additional wireless access point or a cable is the right option.

For this particular viewing setup, each consumer has one key buying priority.

Buying criterion What to look for Who is it important to?
Signal where you watch Check the router’s location and the actual signal in the room; plan to place an additional unit somewhere with a usable signal. When I watch a recording in a room behind thick walls, a stable connection where I watch matters more to me than a high maximum data rate. Around 36% of consumers put coverage first.
Wiring between rooms Check whether you can run Ethernet to the access point or playback device; if not, check the signal at the planned location of a wireless unit. If I can run a cable, I don’t want the connection to the viewing room to depend on weak Wi-Fi all over again. Around 29% of consumers prioritise a wired connection.
Connection compatibility Check your connection type and existing modem. If you’re replacing your router, also consider any phone features you need. If I replace my router, it needs to work with my DSL or cable connection and the equipment I already have. Around 21% of consumers put connection compatibility first.
Use by multiple devices Check the connection at your playback device during normal use; don’t confuse advertised Wi-Fi data rates with the internet speed available to you. I want the recording to keep playing even when other devices are online at the same time. Around 14% of consumers prioritise stable playback when several devices are in use.

Common buying mistakes

  • Comparing only the highest advertised Wi-Fi data rate

    Walls and distance affect the signal where you actually watch. A maximum data rate doesn’t tell you how stable the connection will be there.

    Check the signal right beside your playback device and plan the data route before comparing technical specifications.

  • Placing a mesh node in a dead zone

    The additional unit still needs a working connection to the router. If it’s already in a dead zone, it may not be able to connect back to the router.

    Check the signal at the planned location. If you can run a cable, consider Ethernet backhaul.

  • Treating DSL routers, cable routers and mesh systems as interchangeable

    These devices do different jobs in connecting you to the internet. A mesh system may need an external internet source.

    Before choosing, note your connection type and the modem you already have, then check what role the additional device is meant to play.

Brands to consider

FRITZ!

Worth considering if your router needs to work with a DSL or cable connection and you’re planning to extend your Wi-Fi.

  • FRITZ! lists the 7690 for DSL or use behind a fibre-optic modem; the 6690 Cable is designed for cable connections with DOCSIS 3.1.
  • These connection types aren’t interchangeable. A standalone router won’t guarantee a signal through thick walls.

TP-Link

Deco mesh systems are an option if you need Wi-Fi in additional locations.

  • TP-Link lists Ethernet backhaul as an option for connecting compatible Deco units by cable.
  • According to TP-Link, a Deco system needs an external internet source. The manufacturer’s coverage claims don’t guarantee a signal in a specific home with thick walls.

ASUS

According to ASUS, the ZenWiFi XD5 can operate as a router, access point or AiMesh node.

  • The German technical specifications list one Gigabit WAN/LAN port and one Gigabit LAN port per unit.
  • The pack size and local specification need to suit your planned installation; the port specifications don’t guarantee a particular signal through walls.

NETGEAR

Orbi systems are worth considering as a mesh option for several wireless access points.

  • NETGEAR distinguishes between shared wireless bands, dedicated wireless backhaul and Ethernet backhaul.
  • Features and the type of connection between units vary. The brand’s performance claims aren’t a measurement of how the system will work in your home.

Synology

The RT6600ax is worth considering if you need configurable networks as well as router functions.

  • Synology lists a configurable 2.5 GbE WAN/LAN port for this model, along with router, access point and mesh configurations.
  • Additional network management won’t, by itself, fix a Wi-Fi dead zone behind thick walls.

Joybuy product selection

This selection includes mesh systems for several rooms, additional access points and a DSL router for a compatible connection.

TP-Link Deco BE22, 2-pack, Wi-Fi 7 mesh system

TP-Link Deco BE22, 2-pack

For households looking to set up mesh Wi-Fi in several locations.

Listed as a dual-band mesh system with Wi-Fi 7 and Gigabit Ethernet.

According to TP-Link, Deco needs an external internet source, such as a modem or a suitable Ethernet wall socket.

Joybuy
Ubiquiti UniFi U6 Mesh Wi-Fi 6 access point for indoor and outdoor use

Ubiquiti UniFi U6 Mesh

Listed as an access point for extending Wi-Fi indoors or outdoors.

The product name specifies Wi-Fi 6 and a PoE adapter included in the box.

Check that the power supply and intended mounting location suit your setup.

Joybuy
Ubiquiti U7 Mesh access point with Power over Ethernet

Ubiquiti U7 Mesh

For installations where an additional mesh access point is planned.

The product name specifies Power over Ethernet.

According to the product information, you’ll need a suitable PoE or PoE+ injector, or a compatible switch, to provide power.

Joybuy
TP-Link Deco M4 AC1200 mesh system, 3-pack

TP-Link Deco M4 AC1200, 3-pack

For households looking to place mesh units in several rooms.

Listed as a dual-band mesh system with Gigabit ports.

According to TP-Link, Deco needs an external internet source, such as a modem or a suitable Ethernet wall socket.

Joybuy
FRITZ!Box 7530 AX Wi-Fi 6 router

FRITZ!Box 7530 AX

For a compatible DSL connection if you’re looking for a DSL router that can be extended with mesh.

FRITZ! lists this model as a DSL router with Wi-Fi 6 and mesh support.

Before switching, check that your connection type is compatible with this router.

Joybuy

Frequently asked questions

How can I tell whether it’s the Wi-Fi or my internet connection interrupting playback?

Compare the connection directly at your playback device with a test near the router. For its own service, Netflix recommends a stable connection of 5 Mbit/s for Full HD and 15 Mbit/s for 4K. These figures aren’t a general requirement for every theatre streaming platform.

Where should I place an additional mesh unit?

If it connects wirelessly, place it somewhere that still gets a good signal from the router, rather than in the existing dead zone. If you can run a cable, you can connect a suitable access point near your viewing spot via Ethernet.

Does a TP-Link Deco system need an additional modem or an existing internet connection?

Yes. TP-Link says Deco needs an external internet source, such as a modem or a suitable Ethernet wall socket. Any additional equipment you need depends on what you already have for your connection.

Can I use my own router in Germany instead of the one supplied by my provider?

Yes, you can use a router bought independently, as long as it’s suitable for your connection. The German Federal Network Agency (Bundesnetzagentur) notes that your provider must supply the necessary access details in an appropriate way.

What should I check about the wireless approval of the router I buy?

Check the CE marking, the manufacturer’s information and the declaration of conformity for the specific device. The Bundesnetzagentur lists these as market surveillance criteria; mentioning a model doesn’t replace checking the specific product listing.