Which solution is right for you?

Homes with dead zones on several floors

If your TV is in an area with poor coverage, check whether you can connect multiple nodes placed in suitable locations. devolo notes that ceilings and walls can interfere with Wi-Fi connections.

Homes with LAN cables between floors

Existing network cables can provide a wired link between Wi-Fi nodes. TP-Link lists Ethernet backhaul as an option for the Deco X50; check that the operating mode of your chosen system supports it.

Homes with an existing FRITZ!Box

If you only want to improve coverage in one weak spot, you could first look at extending your existing router. FRITZ! explains how to connect the Repeater 3000 AX to a mesh network via LAN with a FRITZ!Box running FRITZ!OS 7 or later.

What should you look for when buying?

First, identify the bottleneck: compare your broadband connection at the router with the connection at your TV. Then decide whether a wireless link between floors, existing network cables or a targeted router extension best suits your home.

Mesh nodes with a wireless link

A good fit if: You need Wi-Fi on several floors, don’t have usable LAN cables and can place nodes where they have a strong connection to each other.

Consider: Nodes need power and suitable locations. Manufacturers’ coverage or data-rate claims don’t guarantee a signal through the ceilings in your home.

Mesh nodes with Ethernet backhaul

A good fit if: Network cables reach suitable locations on different floors and your chosen system supports Ethernet backhaul. TP-Link lists this as an option for the Deco X50.

Consider: The cable route, ports and operating mode all need to be compatible with your specific system.

Extend your existing router where needed

A good fit if: Mainly one area has weak coverage and you want to keep using your existing router.

Consider: According to FRITZ!, the documented LAN mesh connection for the FRITZ!Repeater 3000 AX requires a FRITZ!Box running FRITZ!OS 7 or later. This doesn’t mean it will connect in the same way with every router.

Priority What to check when buying Who is this particularly important for?
Signal where you watch Check node locations and the connection at your TV. If I watch a film on another floor, what matters most to me is having a usable connection right by the TV. Around 36% of consumers put coverage where they watch at the top of their list.
Cable route between floors Check the cable ends, LAN ports and Ethernet backhaul support on the specific model. If you want to use existing network cables to link your nodes, make sure the operating mode is compatible. Around 29% of consumers prioritise a cable route between floors.
Keeping your existing router Check your router model, firmware and the documented mesh connection. If you want to keep your router and only need help in one area, a compatible extender may be an option. Around 21% of consumers focus on keeping their existing router.
Cause of buffering Check your broadband speed and the connection at your playback device separately. Before buying a device, I want to know whether my broadband connection or home network is limiting the stream. Around 14% of consumers put diagnosing the bottleneck first.

Avoid common misconceptions

  • A quoted coverage area doesn’t guarantee a signal through three ceilings

    Ceilings, walls and placement all affect the connection in your home. A manufacturer’s coverage claim doesn’t account for these specific conditions.

    Plan suitable locations for your nodes and check the connection where you actually watch.

  • A high Wi-Fi data rate doesn’t guarantee smooth streaming

    The stated Wi-Fi rate isn’t the internet speed measured at your TV. Your broadband connection could also be limiting the stream.

    Check your broadband connection and playback location separately before buying a model with a higher advertised rate. The Federal Network Agency explains how to compare your actual broadband speed with the speed agreed in your contract.

  • Documented mesh compatibility doesn’t apply to every router

    FRITZ! states that connecting the Repeater 3000 AX to a mesh network via LAN requires a FRITZ!Box running FRITZ!OS 7 or later.

    Before buying, check your router model, firmware and the operating mode you need.

Key brands to consider

TP-Link

The Deco X50 is a documented option for a mesh system with multiple units and optional Ethernet backhaul.

  • TP-Link lists three Gigabit ports per Deco X50 unit, as well as router and access point modes.
  • Manufacturers’ claims for maximum Wi-Fi rates and coverage areas aren’t measurements taken in a specific three-storey home.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for FRITZ!Box owners to consider when targeting an area with weak coverage.

  • FRITZ! explains how to connect it to a mesh network via LAN with a FRITZ!Box running FRITZ!OS 7 or later.
  • This documented connection doesn’t automatically apply to routers from other manufacturers, nor does it guarantee coverage on all three floors.

eero

eero describes the 6+ three-pack as a multi-node option for use in Germany.

  • The provider describes app-based setup as a feature of the system.
  • According to eero, additional online security features are available only through a separate subscription.

Joybuy products for adding Wi-Fi coverage

The mesh systems below are designed to add Wi-Fi coverage around your home. Before buying, check that the number of units and the features listed suit your router, potential locations and any existing cable route.

TP-Link Deco BE22 mesh system, two-pack

TP-Link Deco BE22 Wi-Fi 7 Mesh System (2-pack), Dual-Band, Gigabit Ethernet, White

This two-unit set is worth considering if you need Wi-Fi in more than one location.

Wi-Fi 7, dual-band and Gigabit Ethernet.

Joybuy
TP-Link Deco M4 AC1200 mesh Wi-Fi system, three-pack

TP-Link Deco M4 AC1200 Mesh Wi-Fi System (3-pack)

This three-unit set could be considered for Wi-Fi in multiple locations.

AC1200, dual-band and Gigabit ports.

Joybuy
TP-Link Deco X1500 Wi-Fi 6 mesh system, two-pack

TP-Link Deco X1500 Wi-Fi 6 AX1500 Mesh Wi-Fi System (2-pack)

This two-unit set is an option if you need Wi-Fi in additional locations.

Wi-Fi 6, AX1500 and Gigabit ports.

Joybuy
TP-Link Deco S4 AC1200 mesh Wi-Fi system, three-pack

TP-Link Deco S4 AC1200 Mesh Wi-Fi System (3-pack)

This three-unit set could be an option for Wi-Fi in several locations.

AC1200, dual-band and Gigabit ports.

Joybuy
MERCUSYS Halo H3000X mesh Wi-Fi system, two-pack

MERCUSYS Halo H3000X Mesh Wi-Fi System (2-pack), Wi-Fi 6 AX3000, Dual-Band

This two-unit set is designed for homes that need Wi-Fi in several locations.

Wi-Fi 6 AX3000, dual-band and three Gigabit ports per unit.

Joybuy

Frequently asked questions

How can I check whether buffering is caused by my broadband connection or the TV’s location?

Before choosing mesh to fix a suspected dead zone, compare your broadband speed with the connection at your TV. The Federal Network Agency explains how to compare your actual broadband speed with the speed agreed in your contract. Netflix also offers a network check on your TV or connected device.

What speed does Netflix recommend for a 4K film?

Netflix recommends 15 Mbit/s or more for a stable UHD 4K stream. This is a recommendation from that streaming service, not a general minimum requirement for every film or a guarantee when other people are using the connection at the same time.

Can I use network cables between floors for mesh?

Yes, provided the cable route and your specific system are compatible. TP-Link lists optional Ethernet backhaul for the Deco X50; FRITZ! describes a LAN bridge between the Repeater 3000 AX and a FRITZ!Box. Check the ports and operating mode before buying.

Will a FRITZ!Repeater work with any router in a mesh network?

FRITZ! states that connecting the Repeater 3000 AX to a mesh network via LAN requires a FRITZ!Box running FRITZ!OS 7 or later. Don’t assume this applies to routers from other manufacturers; check compatibility with your specific device.