Which Wi-Fi solution is right for you?

A streaming spot with weak Wi-Fi

You mainly want to get a television or another playback device online in an area with poor coverage. Check whether the repeater still gets a usable connection to the router at a potential location. For Netflix 4K streaming, a stable internet speed at the playback device matters too.

A home with Ethernet between floors

You have a working network connection near your streaming spot and want to connect your Wi-Fi access point through it. Make sure the device you choose explicitly supports the right access point or Ethernet bridge mode.

A home with several Wi-Fi dead zones

You want coverage in several areas and need to plan how many Wi-Fi access points you’ll need and where to put them. Also check that your router and devices support the mesh features you want.

What should you look for when choosing?

Wireless repeater

A good fit if: Only your streaming spot has poor coverage, and the router signal is still strong at a potential repeater location.

Consider: The connection between the repeater and router still depends on the wireless signal.

Access point or Ethernet bridge

A good fit if: There’s a working network connection to the floor you need to cover, and the device supports the right operating mode.

Consider: You’ll need an existing cable route or have one installed; a LAN port alone doesn’t guarantee this will work.

Multiple mesh nodes

A good fit if: You want to cover several areas and your router and additional devices support the mesh features you need.

Consider: You’ll need to plan for additional devices and locations. Extending Wi-Fi doesn’t automatically mean you can create a mesh network across different brands.

Priority What to check before buying Who it matters most to
Wireless connection at the repeater location Check potential socket locations and the router signal at each one, then test the connection at your playback device. If I need to position the repeater between the router and television, I want to know whether there’s still a usable signal there. Around 40% of consumers put the wireless connection to the repeater first.
Ethernet at the streaming location Check the cable route to the area you need to cover, and make sure the device explicitly supports access point or Ethernet bridge mode. If there’s already a network cable to the floor I need, I’d rather connect the Wi-Fi access point through it than rely on a wireless signal passing through several floors. Around 30% of consumers prioritise an Ethernet connection at the destination.
Router and mesh compatibility Check your router model, product variant and the specific mesh technology you want to use. If I want to cover several areas, I check whether the router and additional devices support the same mesh features. Around 20% of consumers put mesh expansion first.
Streaming while other people are online Measure internet speed at the playback device. Netflix recommends at least 15 Mbit/s for stable 4K streaming on its service. If several people are streaming at once, I want to check the connection at the television against the picture quality I’m after, rather than go by the advertised wireless data rate. Around 10% of consumers prioritise simultaneous use.

Common mistakes when choosing a Wi-Fi repeater

  • Plugging in the repeater where the router signal is already very weak

    A wireless repeater can only pass on the signal it receives. In a multi-storey house, the wireless connection at the repeater’s location matters too.

    First, check potential locations and the router signal at each one. If the wireless connection isn’t strong enough, consider a wired access point or placing your Wi-Fi access points elsewhere.

  • Confusing advertised Gbit/s with streaming speed

    Manufacturers’ figures for maximum wireless speeds aren’t the same as the stable internet speed you get at your television. Netflix recommends at least 15 Mbit/s for 4K streaming on its service.

    Measure the speed at the playback device under typical conditions, and check the requirements of your streaming service.

  • Confusing router compatibility with mesh compatibility

    TP-Link describes the RE705X’s general Wi-Fi extension separately from EasyMesh, which requires a compatible router. devolo describes mesh networking with other compatible devolo Wi-Fi products.

    Before buying, check your router model and the specific mesh feature you want against the device specifications.

Key brands and their product ranges

FRITZ!

The FRITZ!Repeater 3000 AX is a tri-band option with two Gigabit LAN ports for households considering both wireless and wired connections.

  • The manufacturer lists Wi-Fi 6, mesh and speeds of up to 4.2 Gbit/s among this model’s features.
  • The advertised maximum wireless speed isn’t a measured throughput figure for a three-storey house. Check that the mesh features you want will work with your router.

TP-Link

The RE705X combines dual-band Wi-Fi 6 with a Gigabit port and access point mode, so you can start with a wireless connection and potentially switch to Ethernet later.

  • TP-Link says it can extend Wi-Fi from any Wi-Fi router.
  • The EasyMesh feature described requires an EasyMesh-compatible router. Available hardware versions may vary by region.

devolo

The WiFi 6 Repeater 5400 and a bundle of two devices are options for covering one or more areas.

  • According to the manufacturer, if you have network cabling, the devices can also be used as access points and linked with other compatible devolo Wi-Fi products to create a mesh network.
  • A bundle with two devices means you’ll need to plan for more nodes. Manufacturer coverage claims don’t guarantee a signal through every floor.

NETGEAR

The EAX15 is a plug-in Wi-Fi 6 repeater with a Gigabit Ethernet port for extending your network in a compact form.

  • NETGEAR advertises mesh and speeds of up to 1.8 Gbit/s for this model.
  • These advertised figures aren’t an independent measurement of the wireless connection in your home. Check the operating mode you need and how the device will work with your router.

ASUS

The RP-AX58 is another range extender to consider if you want to check how well it works with your router.

  • ASUS lists the model on its German support page.
  • ASUS notes that specifications may vary by country. This doesn’t guarantee coverage across all three floors.

Joybuy products for repeaters, access points and mesh

The products below cover wireless Wi-Fi extension, wired access points and a mesh kit. The right solution depends on whether you have a network connection at the destination and which features your router supports.

MERCUSYS ME80X Wi-Fi 6 range extender

MERCUSYS ME80X Wi-Fi 6 Range Extender, AX3000 Dual Band

Can be used as a wireless range extender or in access point mode with an Ethernet connection.

Dual-band Wi-Fi 6; AX3000 with 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz; Gigabit port. For access point mode, connect the port to the router using Ethernet.

View at Joybuy
TP-LINK RE235BE BE3600 dual-band Wi-Fi 7 range extender

TP-LINK RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

For wireless extension; the EasyMesh feature requires an EasyMesh-compatible router.

Features include a 2.5-Gigabit port, MLO and Smart Roaming. Check that your router supports EasyMesh before buying.

View at Joybuy
Ubiquiti UniFi U6+ Wi-Fi 6 access point

Ubiquiti UniFi U6+ Wi-Fi 6 Access Point

For a Wi-Fi access point in a location with an Ethernet connection and suitable PoE power.

Dual-band Wi-Fi 6 and Gigabit Ethernet with PoE. Requires a PoE-compatible switch or injector; set-up is managed through the UniFi Network application.

View at Joybuy
Ubiquiti U7 Mesh access point

Ubiquiti U7 Mesh 5000 Mbit/s PoE Access Point

For a wired Wi-Fi access point; the product description also mentions centralised configuration for distributed mesh installations.

Wi-Fi 7 and a PoE-compatible 2.5-Gigabit Ethernet port. Requires an Ethernet connection and a compatible PoE or PoE+ switch or injector.

View at Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 mesh kit with two units

MERCUSYS Halo H25BE Wi-Fi 7 Mesh Set (2-Pack)

For a two-unit mesh set-up: connect one unit to the modem using Ethernet, then place the second within its range.

BE3600 dual-band; three Gigabit ports per unit; WPA3. Set-up includes connecting one unit as the main router.

View at Joybuy

Frequently asked questions

How can I tell before buying whether my internet connection or Wi-Fi is the bottleneck?

Measure your internet speed at the playback device in the spot where you plan to use it. Netflix also explains how to run a test in its TV app. Its recommendation of at least 15 Mbit/s is for stable 4K streaming on Netflix; it isn’t the same as the Wi-Fi data rate shown on a repeater’s packaging.

Can I use a repeater with a LAN port without a wireless connection to the router?

Only if that specific model has an access point or Ethernet bridge mode and you have a working network connection to your home network. TP-Link lists this mode for the RE705X; devolo describes it for the WiFi 6 Repeater 5400 Mesh Bundle.

What other costs and service terms should I check?

Check whether you’ll need cables, additional Wi-Fi nodes or installation work for your planned set-up, and read the warranty terms for the specific offer. devolo offers a three-year warranty for the WiFi 6 Repeater 5400 Mesh Bundle, with the option to extend it by a further year. This isn’t a general warranty period for other models.

Do I need an individual frequency licence in Germany for a standard Wi-Fi repeater?

You don’t need an individual frequency allocation for ordinary use of the Wi-Fi frequencies generally allocated by the Federal Network Agency (Bundesnetzagentur). Radio equipment covered by the relevant regulations and placed on the EU market must carry a CE marking. However, the marking alone doesn’t tell you whether the Wi-Fi coverage will reach every floor of your home.