Space-conscious simmers with existing flight controls
If you already have a stick or yoke, a separate throttle quadrant can complement your setup. Allow room not just for the unit itself, but also for the levers, cables and any mounting hardware.
Already have a joystick or yoke? Choose a separate throttle quadrant based mainly on the space available, the engine axes you need and how it connects. For circuits in a single-engine aircraft, separate levers for throttle, propeller and mixture can be useful. If you still need flight controls, consider a set with a stick instead, but make sure you have room for the whole setup. Before buying, also check compatibility with your PC or console, and whether you’ll need mounts or an additional controller.
If you already have a stick or yoke, a separate throttle quadrant can complement your setup. Allow room not just for the unit itself, but also for the levers, cables and any mounting hardware.
For virtual circuits, you may want to assign throttle and, if needed, propeller or mixture to separate axes. Check that the levers and the assignments you want are suitable for your aircraft profiles.
If you still need flight controls, you could consider a set with a stick and throttle quadrant. Measure the space required for both parts in your intended layout, even if the throttle quadrant can be detached.
A good fit if: You already have a stick or yoke and want to assign additional engine axes to specific controls.
Things to consider: Allow space for the unit, lever operation, cables and, where necessary, mounting. Some modular setups also require an additional controller.
A good fit if: You still need a joystick and want to buy your flight controls and throttle together.
Things to consider: The set also includes a stick base, so allow space for both parts and check platform compatibility.
When desk space is limited, it’s not just the unit’s dimensions that matter. The lever travel, cables and any clamp also need to fit your planned setup.
| What matters to you | What to check before buying | Who should consider this? |
|---|---|---|
| Desk space and mounting | Measure the available space and desk edge. Logitech G lists the Flight Throttle Quadrant’s casing as 175 × 175 mm wide and deep; Honeycomb Aeronautical gives the Bravo LITE dimensions as 273 × 330 mm, excluding the mounting plate and clamp. | If your desk is short on space, you’ll also need to allow room to operate the controls and mount the unit. Around 36% of consumers prioritise the space it takes up. |
| Suitable levers and axes | Decide whether you want a single throttle axis or separate axes for throttle, propeller and mixture. Then check the assignments in your simulator. | If you want to control engine functions separately during circuits, pay particular attention to the lever configuration. Around 29% of consumers prioritise separate engine axes. |
| Platform and setup | Check the exact PC or console version and how it can be assigned in your simulator. Thrustmaster lists PC and Xbox Series X|S compatibility for the T.Flight Hotas One; the Logitech Flight Throttle Quadrant is listed for Windows. | If you want to use your existing controls with your PC, console and simulator, make sure they all work together. Around 21% of consumers prioritise compatibility and setup. |
| Additional parts and setup | Check everything you’ll need for the complete setup. VKB says that a separate GNX USB Controller is required to connect the GNX THQ directly to a PC via USB. Also check whether you need a mount. | If you want to avoid finding out that parts are missing during setup, check the box contents and available connections in advance. Around 14% of consumers prioritise avoiding the need for additional parts. |
Honeycomb Aeronautical lists the Bravo LITE as 273 × 330 mm, excluding the mounting plate and clamp. You’ll also need space for the levers and connections.
Measure your desk with the setup in its intended position, and check which parts are included in the manufacturer’s dimensions.
VKB notes that the GNX THQ does not include a USB controller.
Before buying, decide whether you want to connect the module directly via USB or use compatible hardware you already own.
According to VKB, direct USB connection to a PC requires a separate GNX USB Controller.
The Thrustmaster TCA Quadrant is designed for Airbus-style controls, while the CH Products Throttle Quadrant offers six axes. They’re designed for different types of setup.
Choose your levers based on the aircraft you mainly simulate and how you want to assign the engine controls. According to Thrustmaster, the TCA’s detents can be disabled for linear axes.
For relevant consumer purchases, your statutory rights are against the seller. A voluntary guarantee is separate from these rights.
Keep your proof of purchase and the product details, and contact the seller if something is faulty.
The Flight Throttle Quadrant is a separate three-lever quadrant for an existing PC flight-simulation setup.
The GNX THQ is a modular desktop quadrant with three analogue axes and interchangeable lever heads.
The TCA Quadrant Airbus Edition is designed for Airbus-style controls, while the T.Flight Hotas One is a set with a stick and detachable throttle quadrant.
The Bravo LITE and Bravo offer configurations with interchangeable levers for different types of aircraft.
The Throttle Quadrant offers six axes for buyers who want to control several engine functions separately.
The Joybuy products below combine a throttle function with a stick or yoke. They’re sets or flight controls with integrated throttle controls, rather than a selection of standalone throttle quadrants.
No image available
This set is a good option if you still need a stick and want to position the throttle quadrant either attached or separately, depending on your setup.
Thrustmaster lists PC and Xbox Series X|S as compatible platforms.
Allow space for the stick and throttle quadrant in your intended layout.
No image available
The throttle function is built into the flight yoke, making this a good option if you want to combine your yoke and throttle controls in one device.
The product details list PC and PS5 compatibility, seven axes and 24 buttons.
This isn’t listed as a separate throttle quadrant.
No image available
This joystick is worth considering if you want flight controls with integrated throttle control, rather than adding a separate quadrant.
The product details list PC, USB and four axes.
The throttle control is part of the joystick, not a separately listed throttle quadrant.
It depends on the aircraft you’re simulating and how you want to assign the controls. If you want to control throttle, propeller and mixture separately, three-lever quadrants provide three axes for this. Then check the assignments in your simulator.
With the simulator running, open the control settings and select the recognised device. Microsoft Flight Simulator Support notes that any missing control assignments need to be set up manually. You can also create profiles for individual aircraft.
According to VKB, connecting a standalone GNX THQ module directly to a PC via USB requires the GNX USB Controller, which isn’t included. Setups using a compatible Gladiator-NXT/EVO base or GNX modules use different connection options. Check what’s included for the setup you’re planning.
For a standard online purchase from a business seller, you generally have a 14-day right to cancel from the date of delivery, although exceptions and rules on return costs apply. The European Union’s Your Europe website also explains that, for faulty goods, you generally have at least two years of statutory legal protection from the date you receive them, with claims made against the seller. This is separate from a voluntary manufacturer’s guarantee.
No, compatibility depends on the model. Thrustmaster also lists Xbox Series X|S compatibility for the T.Flight Hotas One, while Logitech specifies the Flight Throttle Quadrant for Windows. So check the exact version and compatibility details for your console.