If you already have a joystick or yoke and want to control throttle, propeller and mixture separately in compatible light aircraft, a standalone three-axis quadrant could be a good option. If you still need primary flight controls, a set with a joystick or yoke may be more practical. Larger quadrants offer extra cockpit controls but need more room. Before buying, check your desk space, clearance for the levers, mounting options, connection type and assignment options for your preferred aircraft.
Who might benefit from a throttle quadrant?
If you have limited desk space
If you already use flight controls, you’ll need to consider the unit’s footprint, lever travel and mounting alongside your existing equipment. Logitech Support lists the Flight Throttle Quadrant as 175 × 175 mm wide and deep. The Honeycomb Bravo LITE measures 273 × 330 mm, excluding the mounting plate or metal clamp.
If you want to control engine functions separately
Three axes can be useful in aircraft with separate controls for throttle, propeller and mixture. Logitech G, VKB and Virtual Fly each describe devices with three axes or levers for this purpose. Check which functions are actually available in your preferred aircraft.
If you still need primary flight controls
A throttle quadrant on its own doesn’t replace a joystick or yoke. Thrustmaster describes the T.Flight Hotas One Microsoft Flight Simulator Edition as a set with a detachable throttle, which can be set up together or separately.
What should you look for when buying?
Standalone three-axis quadrant
A good fit if: You already have a joystick or yoke and want to control engine functions separately. Logitech G lists the Flight Throttle Quadrant as 175 × 175 mm wide and deep, while VKB describes the GNX THQ as having three analogue axes.
Bear in mind: Allow extra room for lever travel and mounting. According to VKB, a GNX USB Controller is needed to connect the VKB module directly to a PC via USB as a standalone unit.
Joystick with throttle
A good fit if: You also need primary flight controls. According to Thrustmaster, the joystick and throttle on the T.Flight Hotas One Microsoft Flight Simulator Edition can be set up together or separately.
Bear in mind: The set doesn’t automatically provide three separate engine levers for throttle, propeller and mixture.
Quadrant with extra cockpit controls
A good fit if: You want to use additional controls alongside the engine levers. Honeycomb lists four interchangeable levers, a trim wheel and a landing gear control for the Bravo LITE.
Bear in mind: The Bravo LITE measures 273 × 330 mm, excluding the mounting plate or metal clamp. Allow for both when planning your desk space.
Three levers with dedicated functions
A good fit if: You want separate throttle, propeller and mixture levers, as well as adjustable resistance. Virtual Fly describes these features for the TQ3+.
Bear in mind: According to the manufacturer, the included clamp fits desks up to 50 mm thick. You’ll need to check separately whether the functions suit your aircraft and control assignments.
Airbus-style dual lever
A good fit if: You simulate Airbus procedures as well as flying light aircraft. According to Thrustmaster, detents and reverse thrust can be disabled on the TCA Quadrant Airbus Edition to enable linear axis operation.
Bear in mind: Two levers don’t provide a dedicated three-lever layout for throttle, propeller and mixture. Check the mechanical settings and control assignments for each aircraft.
| What matters when buying |
What to check |
Who is it important to? |
| Footprint and mounting |
Compare unit dimensions on a like-for-like basis, and allow for lever travel, room for your hands and any clamp or mounting plate. |
If there’s only a little space left on my desk, I want to know whether the device and levers will fit alongside my other controls. Around 36% of consumers put footprint and mounting first. |
| Separate engine functions |
Check whether your aircraft use separate throttle, propeller and mixture axes, and whether you can assign them in the simulator. |
If I want to control these functions individually in a particular aircraft, I look for suitable axes rather than simply counting the levers. Around 29% of consumers prioritise separate engine functions. |
| Primary flight controls |
Consider whether you already have a joystick or yoke, and whether you want to set up a kit together or separately. |
If I still need a joystick or yoke, I want to plan my throttle controls and flight controls together. Around 21% of consumers put having primary flight controls at the top of their list. |
| Connection and setup |
Check whether the device works on its own via USB, whether an additional controller is needed and how to assign axes in the simulator. |
If I want to connect the quadrant without extra setup, I check what’s included and how the controls can be assigned beforehand. Around 14% of consumers focus on connection and setup. |
Check these points before you buy
-
Comparing the unit dimensions alone
The Honeycomb Bravo LITE dimensions explicitly exclude the mounting plate and metal clamp. You’ll also need room for the levers and your hands while operating them.
Measure the available desk space and edge where you plan to set it up. Also allow for clearance alongside your existing flight controls.
-
Assuming an expansion module works as a standalone USB controller
According to its European product page, the VKB GNX THQ is supplied without the GNX USB Controller, which is needed to connect it directly to a PC via USB as a standalone unit.
Check whether you have compatible VKB hardware or need the controller for the connection method you want to use.
-
Using Airbus detents for light aircraft without checking them
The TCA Quadrant Airbus Edition is designed around Airbus controls. According to Thrustmaster, detents and reverse thrust need to be disabled for linear axis operation.
If you use the quadrant with a light aircraft, check the mechanical settings and assign the axes for that specific aircraft.
Brands and suitable product ranges
Logitech G
The Flight Throttle Quadrant is a standalone three-axis controller for use with existing flight controls and on desks with limited space.
- Logitech Support lists a width and depth of 175 × 175 mm, a USB connection and three axes. The product page says adjustable mounting clamps are included.
- The unit dimensions don’t guarantee that the levers and clamp will fit every desk. Logitech Support says it will remove LGS installation files and documentation from 31 October 2026. Check whether you need older software.
VKB
The GNX THQ is aimed at buyers who want to use three customisable axes and may want to expand their setup later.
- VKB FSC Europe describes three analogue axes and interchangeable lever heads.
- According to VKB, a GNX USB Controller is needed to connect it directly to a PC via USB as a standalone unit. It isn’t included with the GNX THQ.
Honeycomb Aeronautical
The Bravo LITE and Bravo are aimed at buyers who want extra cockpit controls alongside the engine levers and have enough desk space.
- According to Honeycomb Aeronautical, the Bravo LITE has four interchangeable levers, a trim wheel and a landing gear control.
- The Bravo LITE measures 273 × 330 mm, excluding the mounting plate or metal clamp. The manufacturer’s claim that the larger Bravo can be configured for different aircraft types isn’t an independent comparison.
Thrustmaster
The product range includes a joystick-and-throttle set for beginners who don’t yet have a joystick, as well as an Airbus-style dual lever.
- According to Thrustmaster, the throttle on the T.Flight Hotas One Microsoft Flight Simulator Edition can be detached from the joystick. Detents and reverse thrust can be disabled on the TCA Quadrant Airbus Edition for linear axis operation.
- The TCA Quadrant Airbus Edition has two levers and doesn’t provide a dedicated three-lever layout for throttle, propeller and mixture.
Virtual Fly
The TQ3+ is a specialist three-lever option for buyers who want separate engine controls and a desk clamp.
- Virtual Fly lists separate throttle, propeller and mixture levers, adjustable resistance and a clamp for desks up to 50 mm thick.
- Whether the reverse, feather or cut-off ranges suit your simulated aircraft and control assignments depends on your setup. The manufacturer’s specifications aren’t an independent accuracy test.
Joybuy products for your setup
This selection includes a flight control with an integrated throttle, for setups where you need a yoke as well as throttle control.
No image available
Thrustmaster TCA SKY YOKE
This yoke combines primary flight controls with an integrated throttle, making it worth considering if you need a yoke as well as throttle control.
The product specifications list 7 axes, 24 action buttons, a 180° rotation range, H.E.A.R.T. magnetic technology and 16-bit resolution. It attaches to your desk with a clamp and is listed as 34,40 cm wide; the platforms listed are PC and Xbox Series X.
View at Joybuy
Frequently asked questions
Do I need three engine levers for every light aircraft I simulate?
No, three separate levers aren’t needed for every aircraft. Check whether your specific aircraft has separate throttle, propeller and mixture controls. A three-axis controller is useful if you want to assign these functions individually.
Can I connect the VKB GNX THQ via USB on its own?
According to VKB, the GNX THQ on its own isn’t enough for a direct USB connection to a PC: you’ll also need a GNX USB Controller. Different connection requirements apply when connecting it to compatible VKB hardware.
What can I do if a throttle doesn’t respond properly in Microsoft Flight Simulator 2024?
Select the recognised device and a suitable profile for your aircraft type or model in the control settings. Assign any missing functions manually and check whether an input has been assigned more than once.