Who needs to think carefully about lens choice?

Photographing an entire tile

If you want to photograph the whole tile repeatedly in a confined space, first check the framing with your existing lens. Adobe and Canon Germany offer guidance on product photography and keeping framing consistent.

Photographing glaze and relief details

For small textures, you’ll need to consider magnification, the distance in front of the lens and depth of field together. Nikon Germany, FUJIFILM X Germany and Canon Academy explain relevant aspects of macro photography and depth of field.

Documenting glossy tiles

If accurate colour and visible glaze matter to you, lighting should be part of your plan too. Adobe covers white balance, while Nikon Germany explains how a polarising filter affects reflective surfaces.

What should you look for when buying?

Start by checking the tile’s size, the available shooting distance and the framing you need. Then decide whether your existing lens will do the job or whether you need a macro lens for detail shots.

What matters What to check when buying Who is this important for?
Capturing the whole tile Check the tile size, sensor format and distance with your existing lens; test the framing with your own setup. If I want to show the whole tile on a small table, I’ll first check the framing with my existing lens. Around 37% of consumers are likely to consider capturing the entire tile their top priority.
Magnifying glaze and relief details Compare the maximum magnification with the distance needed in front of the lens; take depth of field into account for relief details too. For small glaze or relief textures, I want greater magnification without losing sight of the sharpness required. Around 27% of consumers are likely to make these details their main priority.
Showing gloss and colour Adjust the lighting position and white balance to suit the shot; assess a polarising filter based on the gloss you want to retain. When photographing a glossy tile, I want to retain its sheen while still reproducing its colour accurately. Around 18% of consumers are likely to make glaze and colour reproduction their main priority.
Allowing enough room on the table Check the space available in front of and behind the tile for the lens, camera, tripod and lighting; don’t confuse the minimum focusing distance with the free space in front of the front element. If space on the table is limited, I need to be able to fit the camera, tripod and lighting into my setup. Around 18% of consumers are likely to consider available space their top priority.

Common misconceptions

  • High macro magnification means the whole tile will fit in the frame

    High magnification is intended for small details. For an overall view, what matters is the framing and the shooting distance available.

    Start by photographing a whole tile with your planned setup. Then check whether you only need greater magnification for the details.

  • Minimum focusing distance means you’ll have free space in front of the front element

    Minimum focusing distance doesn’t tell you how much room there is between the lens and the subject. Nikon Germany gives an approximate distance of 5 cm between the lens and subject at the closest focusing distance for the NIKKOR Z MC 50 mm.

    Plan your lighting and tripod around the free space in your chosen frame, rather than relying on the minimum focusing distance alone.

    When you’re working at a very short distance, positioning side lighting may take extra effort.

  • Choosing the right brand guarantees the right mount

    Lens mounts can vary even within the same brand. Sigma offers the 105mm F2.8 DG DN MACRO | Art in separate versions for Sony E-mount and L-mount.

    Compare the full lens name and mount version with your camera body; don’t assume an adapter will be compatible.

  • Changing lenses will get rid of reflections and colour casts

    Glaze reflections and colour reproduction also depend on your lighting and white balance.

    First, try adjusting the position of your lights and set the white balance to match the light source. Consider a polarising filter based on whether it preserves the surface appearance you want.

Key brands at a glance

Nikon

For Nikon Z cameras, the NIKKOR Z MC 50 mm 1:2,8 combines a 50 mm focal length with 1:1 magnification, according to Nikon Germany.

  • Nikon gives an approximate distance of 5 cm between the lens and subject at the closest focusing distance.
  • The short distance can leave less room for side lighting, and the lens isn’t automatically compatible with other mounts.

Fujifilm

The FUJINON XF30mmF2.8 R LM WR Macro is designed for compatible Fujifilm X cameras. Fujifilm lists a 30 mm focal length and 1:1 magnification.

  • The shorter focal length can be useful for wider framing when space is tight.
  • Fujifilm describes the subject as being very close to the front element at minimum focus, which can limit the room available for lighting. Whether a whole tile fits in the frame depends on your setup.

Sony

The Sony FE 90 mm F2.8 Macro G OSS (SEL90M28G) is designed for Sony E-mount. Sony lists a 90 mm focal length; according to the manufacturer’s specifications, the model offers 1:1 magnification and optical stabilisation.

  • An option for tight framing, provided there’s enough room on the table for your setup.
  • There’s no evidence that it offers an advantage for capturing an entire tile in a confined space.

Sigma

The Sigma 105mm F2.8 DG DN MACRO | Art offers 1:1 magnification according to Sigma, and is available in separate versions for Sony E-mount and L-mount.

  • The longer focal length is an option for small details if your setup has enough room.
  • Sigma lists a minimum focusing distance of 29,5 cm; this doesn’t mean there will be 29,5 cm of free space in front of the lens. Check the framing on your small table.

Canon

The Canon RF 100mm F2.8L Macro IS USM is designed for compatible EOS R cameras. Canon lists a maximum magnification of 1.4x.

  • Its high maximum magnification could be useful for very small details.
  • It isn’t automatically an advantage for capturing an entire tile; the mount and space requirements still matter.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do I need to photograph the whole tile at 1:1?

No. 1:1 describes a possible high magnification for small parts of a subject. For the whole tile, check whether it fits fully in the frame with your lens from the distance available.

How do I set up repeatable detail shots on a table?

Keep the camera and framing steady with a tripod. If a relief needs greater depth of field, you can stop down. With a stationary subject, a stable setup may also allow you to use a longer exposure. Check the focus on the actual detail.

How can I stop a glazed tile looking like a different colour in photos?

Set the white balance to match your light source and adjust the position of your lights to manage unwanted reflections. A polarising filter can reduce reflections from certain surfaces; try it out to see whether your tile retains the sheen you want.

What are my rights when buying a lens online in Germany?

For a qualifying distance purchase from a trader, you generally have a 14-day right to cancel, starting from delivery of the goods; exceptions may apply. Your Europe, the European Union’s information portal, distinguishes this right to cancel from the statutory guarantee for faulty goods, which lasts for at least two years under EU law. A voluntary manufacturer’s warranty is separate.