Who needs a UPS for a NAS in a garden office?

NAS owners who need a safe shutdown

If you want to prevent your NAS from losing power abruptly during an outage, check that the UPS is compatible with your specific NAS model and that the desired protective response is configured. The Synology Knowledge Center notes that firmware or hardware changes can affect compatibility.

Garden offices with network connections

If you also want to power your router or other devices needed for access, you’ll need to factor in their combined power consumption. The Synology Knowledge Center recommends considering the total power draw and available runtime when choosing a UPS.

Owners of unheated garden offices

The temperature and humidity at the installation point must remain within the limits for the specific UPS model. These limits vary from model to model.

What to look for when choosing one

First check how the NAS will respond to a power cut, then check runtime under the combined load, followed by the installation location, outlets and battery.

Buying criterion What to look for Who it matters most to
NAS shutdown Check that the NAS and UPS are compatible, and confirm the supported communication interface and settings. If I want my NAS to respond safely during an outage, I check compatibility and the configured protection function. Around 33% of consumers put NAS protection first.
Runtime for all devices Add together the power consumption of the NAS and any essential network devices, then check the wattage limit and runtime for this combined load. If I want the router or other essential network devices to keep running, I add their power draw to the NAS load. Around 27% of consumers prioritise combined backup runtime.
Installation location Compare the temperature and humidity at the location with the operating limits of the exact model. In an unheated garden office, I want to place the UPS somewhere within its operating limits. Around 20% of consumers put a suitable location first.
Connections and battery Tell battery-backed outlets apart from outlets offering surge protection only, and check battery replacement options for the exact model variant. If I need suitable battery-backed outlets and may need to replace the battery later, I check both for the exact variant. Around 20% of consumers prioritise connections and ongoing costs.

Common buying mistakes

  • Confusing VA with watts or runtime

    VA, output power in watts and runtime under a particular load are different factors to consider. The Synology Knowledge Center recommends checking the supported total load and available battery runtime.

    Consider all the devices you plan to connect together, then compare their power consumption with the wattage limit and runtime stated for that load.

  • Assuming a USB port on the UPS confirms NAS compatibility

    A USB port alone doesn’t confirm that your specific NAS will recognise the UPS and respond as required. Synology also notes that firmware or hardware changes can affect compatibility.

    Check compatibility for your NAS and UPS models, then carry out a controlled test of the configured response once everything is set up.

  • Confusing similarly named variants

    The Eaton EL650USBDIN is listed with USB; the German Eaton page for the similarly named EL650DIN doesn’t list a communication interface and marks that model as no longer available. This doesn’t automatically apply to the other variant.

    Compare the full model number and interface with the specific product variant.

  • Assuming every outlet is battery-backed

    According to Eaton, three Schuko outlets on the EL650USBDIN are battery-backed; the fourth provides surge protection only.

    Connect your NAS and essential network devices only to outlets explicitly listed as battery-backed.

UPS brands to consider

CyberPower

The Value Pro range includes the VP700ELCD, a line-interactive UPS with Schuko outlets, USB and a display.

  • CyberPower lists the VP700ELCD as offering 700 VA, 390 W, four Schuko outlets and ten minutes of runtime at half load; its output waveform is simulated sine wave.
  • Runtime at half load doesn’t tell you how long the UPS will run a specific NAS alongside additional network devices. Check NAS compatibility and actual runtime separately.

PowerWalker

The VI-SH/SHL range includes compact line-interactive UPS models. The VI 850 SHL is listed with HID support via USB and a display.

  • BlueWalker lists the VI 850 SHL as offering 850 VA or 480 W, six minutes of runtime at half load and an operating temperature range of 0 to 40 °C.
  • The half-load figure can’t be applied directly to your own combination of devices, and USB support doesn’t confirm compatibility with every NAS.

Eaton

With the Ellipse ECO range, it’s important to check the full model number, as similarly named variants may have different interfaces.

  • Eaton lists the EL650USBDIN as offering 650 VA, 400 W, a replaceable battery, USB and three battery-backed Schuko outlets.
  • According to Eaton, the fourth Schuko outlet on the EL650USBDIN provides surge protection only. The German Eaton page lists the different EL650DIN model as no longer available and without a communication interface; this doesn’t indicate whether the EL650USBDIN is available.

APC

The Back-UPS range includes Schuko models with voltage regulation; the BX950MI-GR is one documented model.

  • Schneider Electric lists the BX950MI-GR as having four battery-backed Schuko outlets and AVR.
  • A Dutch Schneider Electric product page gives 31 December 2026 as the discontinuation date. This doesn’t indicate current availability in Germany, and the product page in question doesn’t confirm USB support for your specific NAS.

Joybuy products

Recommended products coming soon.

Frequently asked questions

Is the VA rating enough to work out how long my NAS will run?

No. Work out the combined power consumption of the connected devices, check the wattage limit and compare the runtime for a similar load. Manufacturers’ figures at half load can’t be applied directly to every combination of NAS and network devices.

How do I set up the automatic response on a Synology NAS?

Synology explains how to enable UPS support in DSM and set the time before the NAS enters safe mode. First check compatibility with your NAS model, then carry out a controlled test of the configured response once setup is complete. Synology notes that firmware or hardware changes can affect compatibility.

What ongoing costs should I budget for?

Check whether the battery is replaceable and which replacement battery is compatible with the full model number. Whether replacement is supported and which components are needed depends on the specific variant.

Can I extend the electrical installation for my garden office myself?

Under § 13 Abs. 2 NAV, work to install, extend or alter the electrical system downstream of the service fuse must generally be carried out by the network operator or an installation company registered in its installer directory. This is different from using an existing socket; you’ll need to get advice on site about whether a particular installation needs to be modified. The official version of the NAV is published on the Laws on the Internet website.

Where can I take a used UPS battery in Germany?

Used batteries must not be put in household waste. According to the German Environment Agency, you can return them to a retailer free of charge.