If you only copy footage from your drone’s microSD cards, a compact USB-C reader with a compatible microSD slot should do the job. If you also use SD cards, a dual-slot reader is a better choice. First, check your card format, connection and the import method supported by your device. The SD Association points out that card speed and bus interface speed are not the same. Lexar also says that its reader’s performance depends on the card and system configuration.
Which reader is right for you?
microSD users with limited desk space
If you copy drone footage at a small desk, a compact USB-C reader with a microSD slot can help keep your setup simple. SanDisk describes a USB-C reader for microSD cards, while Apple recommends using a suitable adapter with smaller cards.
Users with large video files
If you regularly import large video files, consider the card, reader and destination device together rather than relying on an advertised peak speed alone. The SD Association explains that the speed you can achieve also depends on the card.
Drone and camera users
If you use SD cards as well as microSD cards, a reader with both slots is a good option. UGREEN lists SD and microSD slots for its 50706 model, and Lexar also describes a USB-C dual-slot reader.
What to look for when buying
| Priority |
What to check |
Who it matters most to |
| Space and access |
Plug-in design or cable; casing shape and clearance around neighbouring ports. |
When space is tight, I want to connect the reader without blocking access to other ports. Around 33% of consumers focus on size and access to connections. |
| Copying speed |
The UHS standard supported by the card and reader; conditions for any quoted maximum speeds. |
With large video files, I want to check the card, reader and destination device together rather than relying on a peak speed alone. Around 27% of consumers prioritise transfer time. |
| SD and microSD |
The card formats you need; the standards supported by each slot. |
If I use an SD card in my camera as well as a drone, I want to be able to read both formats with one reader. Around 20% of consumers prioritise support for both card formats. |
| Mobile importing |
A USB-C data connection and the import method documented for your phone or tablet. |
If I want to transfer footage to a phone or tablet, I want to make sure the card reader is compatible with that specific device. Around 20% of consumers focus on importing files to mobile devices. |
Common buying mistakes
-
Assuming the highest MB/s figure matches your own copying speed
The interfaces on the card and reader, as well as the destination device, affect the speed you can achieve when importing files. Lexar notes that its advertised read speed depends on the card and system configuration.
Before paying more for higher advertised speeds, check the standard supported by your existing card and whether the specific reader supports it. The SD Association also distinguishes between bus interface speed and actual card speed.
-
Not checking the card format before you buy
A reader for microSD cards is not automatically the right choice for full-size SD cards. UGREEN and Lexar list dual-slot models, while SanDisk’s QuickFlow reader is designed for microSD.
Make a list of the card formats you actually use, then choose between a microSD-only and a dual-slot reader.
-
Confusing a product name with a specific model
Card readers with similar names can have different slots and connections.
Before you buy, check the full model name and the details that matter to you on the specific product listing.
Key brands to consider
UGREEN
The documented 50706 model combines SD and microSD slots with USB-C and USB-A connectors.
- UGREEN lists simultaneous use of two cards and UHS-I support for this model.
- These details do not demonstrate UHS-II speeds or the features of every card reader from the brand.
Lexar
The Professional USB-C Dual-Slot Reader is designed for users of SD and microSD cards, including UHS-II cards.
- Lexar lists a built-in USB-C cable and an activity light.
- Lexar says the advertised read speed of up to 312 MB/s with UHS-II depends on the card and system configuration.
SanDisk
The QuickFlow microSD Card Reader with USB-C is a compact option designed for microSD cards.
- SanDisk lists USB-C and support for UHS-I and UHS-II microSD cards.
- If you also read full-size SD cards, check whether you need a separate reader or a suitable adapter.
Anker
The Anker 553 USB-C Hub combines SD and microSD card reading with extra ports for your laptop.
- For this hub model, Anker lists features including HDMI, Ethernet and power pass-through.
- If you only copy drone footage, you may not need these extra ports.
Joybuy products for cards and USB-C devices
The Joybuy products below read SD, TF or microSD cards on USB-C devices. Some also combine a card reader with extra ports or features.
No image available
Acer 7-in-1 USB-C Hub Docking Station, ODK6V0
A good fit if you want to use extra ports on a USB-C hub as well as read memory cards.
Includes an SD/TF card reader, HDMI with 4K@30Hz, 100W PD Charging and 3x USB 3.0 with 5Gbps, according to the product name.
View at Joybuy
No image available
WOZINSKY USB-C Hub Adapter 14-in-1
Worth considering if you want to read SD and TF cards and position the hub a little further from your device’s port using its cable.
The product description lists a 15 cm cable and 14 ports.
View at Joybuy
No image available
HOCO HB45 Spirit 2-in-1 (USB-A/USB-C)
A good fit if you want to read microSD cards and use the same reader with USB-A and USB-C ports.
The product details list microSD support and a metal casing in Metal Grey.
View at Joybuy
No image available
4-in-1 USB-C Card Reader with USB-A
An option if you want to read SD and microSD or TF cards on USB-C or USB-A devices.
The product description lists USB 2.0 at up to 480 Mbit/s. If you want to import large video files as quickly as possible, bear this figure in mind when choosing.
View at Joybuy
No image available
7-in-1 External DVD Drive with SD/TF Card Reader
Worth considering if you need an external DVD drive as well as a card reader.
The product name lists USB 3.0, Type-C and a built-in SD/TF card reader.
View at Joybuy
Frequently asked questions
Do I need a UHS-II reader for every drone?
No. First, check the type of card used by your specific drone. The SD Association distinguishes UHS-I and UHS-II as card interfaces; a higher interface rating does not guarantee the actual copying speed.
How do I copy files on a Mac and then remove the card?
On a Mac, you can drag files from the connected card reader to your chosen location in Finder. Apple recommends ejecting storage media before removing it. Check the copied files before deleting anything from your recording card.
What should I know about claims for faulty products when buying in Germany?
For ordinary movable goods, § 438 BGB generally provides for a two-year limitation period from delivery for the claims relating to defects specified there. Any additional manufacturer’s warranty is separate and subject to its own terms and conditions.
Can I put an old card reader in my household rubbish?
No. The German Environment Agency states that waste electrical equipment must be collected separately and must not be put in unsorted household rubbish.