Which audio route is right for you?

PC users with two monitors

If you have several audio outputs to choose from, select the USB audio device you want to use as the playback output on your PC. Microsoft Support treats choosing an audio output and setting up multiple displays as separate settings.

Listeners with existing hi-fi headphones

Check your headphones’ plug and compare their amplification and power requirements with the specific output you’ll be using. A power rating applies to the stated socket and load; it won’t necessarily apply to every output.

Listeners with speakers or a headset

For active speakers, you’ll need a suitable line output. For calls using an analogue microphone or headset, you’ll also need a clearly specified microphone or headset input.

What should you look for when buying?

The number of screens doesn’t determine the audio output. First, check how you want audio to travel from your PC to the device, then choose connections and controls to suit your headphones, speakers or headset.

USB DAC with headphone amplifier

A good fit if: you want to send audio from your PC digitally over USB and connect your headphones directly to the device.

Things to consider: the device takes up desk space and may need its own power supply. You’ll then need to select it as your audio output.

Purely analogue headphone amplifier

A good fit if: you already have a suitable analogue output or DAC.

Things to consider: without an analogue source, there’s no direct digital USB audio route. Check the exact device variant too.

USB sound card with microphone input

A good fit if: you also want to connect an analogue microphone or headset for calls.

Things to consider: call and switching features may be unnecessary if you only listen to music.

DAC with advanced settings

A good fit if: you’re specifically looking for features such as parametric EQ, crossfeed or a separate IEM output.

Things to consider: extra features mean more settings to manage, and they won’t necessarily improve the sound with every pair of headphones.

Criterion What to look for Who it matters most to
Audio connection to the PC Check for a USB audio input, support for your operating system and a suitable power supply. Then select the device as your playback output. If I want a clearly assigned audio output on my dual-monitor PC, USB connectivity is my main consideration. For around 33% of consumers, the PC audio route comes first.
Headphone connection and drive Check the plug and, if needed, the cable, and compare the power specifications for the output you’ll actually use and a comparable load. If you want to keep using your existing hi-fi headphones, you’ll need a compatible connection and clear specifications for that particular output. For around 27% of consumers, headphone compatibility is the top priority.
Connecting active speakers Check for a suitable line output and how its level is controlled. On the iFi ZEN DAC 3, the rear output bypasses the volume control in Fixed mode. If I want to switch between headphones and my existing active speakers, I look at the output and volume control. For around 20% of consumers, being able to switch between them is a priority.
Microphone or headset Check for a dedicated microphone or headset input and the correct connection pinout. If you want to make calls on your PC using an analogue microphone or headset, check the voice input specifically. For around 20% of consumers, this connection is their top priority.

Avoid common buying mistakes

  • Assuming two monitors mean you need two DACs

    Display layout and audio output selection are separate settings. So having a second monitor doesn’t automatically mean you need another DAC.

    First, check which playback device is selected on your PC and whether your existing audio setup is actually causing the problem.

  • Comparing the highest mW rating without considering the socket and load

    The power ratings listed for the FiiO K11 vary by headphone output and relate to a specified load.

    Only compare figures for the output you can use and under comparable test conditions.

  • Buying an analogue amplifier or a DAC-free variant as a USB DAC

    An analogue amplifier doesn’t automatically provide a digital USB audio input. With the Schiit Magni Unity, a direct USB connection depends on choosing the version with the DAC card; the iFi ZEN CAN 3 is a purely analogue amplifier.

    Before buying, check the full variant name and the digital input it provides.

    If your PC doesn’t have a suitable analogue output, you may need an additional DAC or extra cabling to connect it.

  • Assuming a fixed speaker output is volume-controlled

    On the iFi ZEN DAC 3, the rear output bypasses the device’s volume control when set to Fixed.

    Before connecting active speakers, check the output mode and whether the speakers have a suitable volume control of their own.

Key brands at a glance

FiiO

The K11 is a desktop USB DAC with optical and coaxial inputs, as well as several audio outputs.

  • For the K11 at 32 Ω, FiiO specifies at least 1,400 mW per channel from the 4.4 mm output and at least 520 mW per channel from the 6.35 mm output. The 4.4 mm output rating applies at THD+N < 1%.
  • This model requires an external 12 V/2 A power supply. These power ratings apply to the specified outputs and conditions; they don’t apply across the board to other FiiO models.

iFi audio

The ZEN DAC 3 combines USB audio and headphone outputs with switchable rear analogue outputs. The ZEN CAN 3, by contrast, is purely analogue.

  • The ZEN DAC 3 manual lists 6.35 mm and 4.4 mm headphone outputs, as well as RCA and 4.4 mm analogue outputs with fixed or variable levels.
  • The device is powered via USB or a separate power supply, which the manual says is not included. In Fixed mode, the rear output bypasses the volume control.

Creative

The Sound Blaster X4 combines USB audio with connections and controls for analogue microphones and headsets.

  • Creative lists a mic-in, headset-in, USB-C for audio and power, a microphone mute switch, and switching between speakers and headphones.
  • These feature specifications for the X4 don’t demonstrate an independent sound-quality advantage for listening to music.

Schiit Audio

The Magni Unity illustrates the difference between an analogue headphone amplifier and a version with a USB DAC card.

  • Schiit Europe describes a version with an integrated DAC card.
  • An order without the DAC card shouldn’t be treated as a DAC that can be used directly over USB. Check the exact configuration carefully.

RME

The ADI-2 DAC FS is aimed at listeners looking for extra settings or a separate output for in-ear monitors.

  • For this model, RME lists USB, optical and coaxial digital inputs, an IEM output, parametric EQ and crossfeed.
  • Whether these features justify the extra time spent adjusting settings depends on whether you’ll actually use them.

Joybuy products for your PC desk

This selection includes a USB DAC with headphone amplifier and an analogue desktop headphone amplifier. The analogue amplifier requires a suitable analogue audio output on your PC.

Nobsound Q4 USB Audio Gaming DAC with Bluetooth headphone amplifier

Nobsound Q4 USB Audio Gaming DAC with Bluetooth headphone amplifier

For a digital USB connection from your PC, with a direct headphone connection and Bluetooth functionality.

Features an optical input, 24-bit/192-kHz specification, treble and bass controls, and a remote control.

View at Joybuy
Douk Audio T4 PRO Mini Valve GE5654 Tube Phono Pre-amplifier

Douk Audio T4 PRO Mini Valve GE5654 Tube Phono Pre-amplifier

For a PC with an analogue 3.5 mm audio output and a headphone connection at your desk; this device doesn’t provide a direct USB DAC audio route.

Requires an external 12 V power supply. Use a suitable power supply.

View at Joybuy

Frequently asked questions

Does the DAC need to be connected to one of the two monitors?

No. For this audio setup, connect a USB DAC to your PC. Then select it as your playback device. Microsoft Support notes that if several audio outputs are available, you need to select the one you want to use. Your display configuration is managed separately.

Can I connect an analogue headset microphone to any headphone DAC?

No. The device must have a suitable microphone or headset input. Creative lists these inputs for the Sound Blaster X4; check your headset’s connection pinout as well.

How do I compare amplifier power for my headphones?

Only compare power ratings for the output you’ll actually use and at the same load. For the K11 at 32 Ω, FiiO gives different figures for the 4.4 mm and 6.35 mm outputs, so the higher figure alone doesn’t tell you whether another socket is suitable.

What should I know about faults or buying online in Germany?

As the Verbraucherzentrale explains, your statutory rights against the seller are separate from any voluntary guarantee. For ordinary goods, § 438 BGB generally sets a two-year limitation period from delivery. Online consumer contracts also usually come with a 14-day right to cancel, although conditions and exceptions may apply in individual cases.

How can I set the volume safely when connecting the device for the first time?

Start at a low volume and adjust the gain carefully. In the ZEN DAC 3 manual, iFi warns against switching PowerMatch at high volume. The World Health Organization notes that both volume and listening time affect the risk to your hearing.