Who might benefit from a USB DAC?

Listeners with wired headphones

Before buying, you want to check that the plug, headphone output and volume control are compatible. FiiO and iFi audio’s model specifications show that the available sockets vary from one device to another.

Listeners with a dedicated PC setup

You want to adjust the volume at your desk or connect active speakers. The outputs and power supply of the specific device are key here, as the specifications from FiiO and iFi audio make clear.

Listeners short on desk space

You’re looking for a small USB headphone output rather than a larger desktop device, and want to know whether its sockets and controls will work for your headphones. FiiO and AudioQuest list compact USB models with different connections.

What should you look for when buying?

First, check whether your PC’s existing output is good enough. If you need an additional device, compare its connections, level control, usability and space requirements.

What matters What to check before buying Who is this important to?
Compatible connections PC port and cable required; headphone socket on the exact model, such as 3.5 mm, 4.4 mm or 6.35 mm. If I want to connect my headphones directly, their plug must match the DAC’s socket. For around 36% of consumers, connections are the top priority.
Adjustable listening level Compare gain settings and power specifications for the output you’ll use and your headphones’ impedance; start at a low volume. When listening at my desk, I want to set the level to suit me rather than relying on the maximum power rating alone. Around 29% of consumers prioritise level control.
Controls and additional outputs Check whether it has an easy-to-reach control and a suitable line output; consider the power supply and the space it will take up. If I want to connect other audio equipment or adjust the level directly at my regular PC setup, the outputs and controls are essential. Around 21% of consumers focus primarily on desktop controls.
Small footprint Compare the dimensions, USB power requirements and outputs you need; also consider your PC’s existing output. To keep my listening space tidy, I want to use a small device with only the connections I actually need. Around 14% of consumers put space requirements first.

Common buying misconceptions

  • Choosing based only on maximum sample rate or power

    Maximum figures apply to the individual model and can vary depending on the socket, headphone load and operating mode. By themselves, they don’t prove that you’ll hear an improvement over your PC’s output.

    First, check whether your existing output is suitable. Then compare the connections and power specifications that apply to your headphones and the output you’ll use.

  • Assuming a headphone output supports a microphone

    A headphone output doesn’t automatically mean you can connect a headset microphone too. Creative specifically lists microphone and headset inputs as separate features on the Sound Blaster X4.

    If you want to use your headset’s microphone, check that the exact model has the right input.

    Without a suitable microphone connection, you may need another device or an additional connection for calls.

  • Overlooking the power supply and space required

    Power requirements vary by device: FiiO specifies 12 V/2 A DC for the K11; according to the iFi manual, the ZEN DAC 3 can be powered via USB or 5 V DC. The manual states that a separate DC power supply is not included.

    Before buying, check where the device will sit and what power source the specific version requires.

    A desktop device takes up space; depending on the model, you may also need a suitable power supply.

Key brands at a glance

FiiO

The models featured range from the compact KA13 to the desktop K11, which has additional inputs and outputs.

  • FiiO lists 3.5 mm and 4.4 mm outputs for the KA13; power output depends on desktop mode.
  • According to FiiO, the K11 also has RCA line-out and digital inputs.
  • The K11 requires 12 V DC. These features don’t necessarily apply to the brand’s entire range.

iFi audio

The ZEN DAC 3 is a desktop USB-C option for headphones and, depending on the connection and settings, other audio equipment.

  • The manual lists 6.35 mm and 4.4 mm headphone outputs, as well as additional fixed or variable outputs.
  • The manual describes switchable gain and power via USB or 5 V DC.
  • The manual states that a separate 5 V DC power supply is not included; manufacturers’ claims about sound aren’t independent listening tests.

Creative

The Sound Blaster X4 is better suited to a PC setup where you need microphone or headset connections as well as audio playback.

  • Creative lists a microphone input, a headset input, a volume control and USB-C power for the X4.
  • The additional communication features may not be necessary if you only listen to stereo audio through headphones. The manufacturer’s specifications don’t prove a general improvement in sound.

AudioQuest

The DragonFly Cobalt is a compact USB DAC and headphone amplifier for computers.

  • AudioQuest lists a maximum resolution of 24 Bit/96 kHz and includes a USB-C extension adaptor in the box.
  • The manufacturer’s description of clearer or better sound doesn’t prove an advantage over a particular PC output.

Suitable products at Joybuy

A selection of USB DACs for PC headphone listening, with additional connections for your desk.

Nobsound Q4 USB audio gaming DAC with Bluetooth

Nobsound Q4 USB Audio Gaming DAC with Bluetooth and Optical Input, 24-Bit 192 kHz

For a dedicated PC setup if you want additional connections and a remote control as well as a headphone output.

The product description lists a USB input for your PC, a headphone amplifier for headphones with 16–300 Ω impedance, RCA outputs, tone controls, a remote control and an input selector.

According to the product description, an external DC power supply is required.

View at Joybuy

Frequently asked questions

Do I always need to install an additional driver on Windows?

No, not in every case: Microsoft documents a built-in driver for compatible USB Audio 2.0 devices from Windows 10, version 1703 onwards. Whether a particular DAC’s extra features need their own software depends on the model.

How do I connect a DAC to headphones and active speakers?

Connect the appropriate USB audio input to your PC and plug your headphones into the designated socket. Active speakers need a suitable line output; the iFi ZEN DAC 3 manual distinguishes between fixed and variable volume settings. Start at a low volume.

What should I bear in mind during longer listening sessions?

Be mindful of both the volume and how long you listen for. The World Health Organization identifies both as factors affecting exposure to loud sounds; the position of a control or an amplifier’s power rating alone doesn’t tell you the sound level at your ears.

What are my rights if an online purchase in Germany is faulty?

When you buy from a trader, you’re generally entitled to statutory consumer rights for at least two years from the date you receive the goods. Most distance purchases also come with a 14-day cancellation period from delivery; exceptions apply. The European Union’s Your Europe website explains these rights. This is separate from any voluntary manufacturer’s warranty.

How should I dispose of an old USB DAC?

Electrical waste shouldn’t go in your household rubbish. The German Federal Ministry for the Environment lists local collection points and, in certain circumstances, take-back schemes run by retailers as disposal options.