Which setup is right for you?

Listeners short on desk space

If you want to listen to high-resolution files through wired headphones without making room for a larger unit, start by looking at a compact USB DAC with the right output. FiiO lists the KA13 at around 56.5 × 22 × 10.5 mm, with 3.5 mm and 4.4 mm outputs.

Hi-Res file collectors

If playing your specific PCM or DSD files matters to you, the file format, playback software and DAC all need to work together. A high maximum sample rate alone doesn’t tell you whether the entire playback chain supports your files.

Listeners with a dedicated headphone setup

If you want volume and connections within easy reach on your desk, or need to connect other audio equipment, a desktop DAC could be a good fit – as long as you can make room for it and, where necessary, a separate power supply. FiiO says the K11 requires a DC power supply, while the iFi ZEN DAC 3 can also be powered via USB, according to its manual.

What should you look for when buying?

USB dongle

A good fit if: every centimetre of desk space counts and a USB connection plus a suitable headphone output are all you need.

The trade-off: it takes up very little space, but connections and controls vary by model. FiiO lists different power output figures for the KA13 depending on the output and whether Desktop Mode is enabled.

Compact desktop DAC

A good fit if: an easy-to-reach volume control, extra outputs or a dedicated connection point matter more than keeping your setup as small as possible.

The trade-off: the unit takes up more space and may need a power connection, depending on the model. FiiO lists the K11 at 147 × 133 × 32.3 mm, including its feet; iFi says the ZEN DAC 3 can also be powered via USB.

Buying priority What to check Who it matters most to
Desk space and cables Unit dimensions, room for USB and headphone cables, and how easy the volume control is to reach. If there’s barely any free space on my desk, I don’t want to have to squeeze in a larger unit. Around 36% of consumers put desk space first.
File formats File bit depth and sample rate, the USB limit of the specific model, and your playback software settings. If I want to play my Hi-Res files as close as possible to their original resolution, I check that the whole playback chain is compatible. Around 29% of consumers prioritise support for their files.
Headphone connection and drive Plug type, plus the power output rating for the output you’ll use, the relevant load and the operating mode. If I want to keep using my current headphones, the connection and amplification need to suit them. Around 21% of consumers prioritise matching their DAC to their headphones.
Extra outputs The analogue outputs you need, fixed or variable volume, and the required power supply. If I might want to connect active speakers or an amplifier later, I check the connections and leave enough room for the cables. Around 14% of consumers prioritise expandability.

Common buying mistakes

  • Choosing a DAC based on its maximum sample rate alone

    Playback also depends on the file format, the input you use and your software settings. A higher maximum sample rate doesn’t, by itself, guarantee an audible benefit.

    Start with the files you actually listen to, then check the DAC’s USB specification and your software’s output options. For Qobuz on PC, the Qobuz Help Centre lists WASAPI exclusive or ASIO as playback modes.

  • Assuming headphone outputs and power ratings are interchangeable

    3.5 mm, 6.35 mm and 4.4 mm connections aren’t interchangeable. The FiiO KA13’s power output figures depend, among other things, on the connection, load and whether Desktop Mode is enabled.

    Check your headphone plug and compare the power output figure for the right load and the output you’ll actually use.

    If the plug doesn’t fit, you may need a suitable adapter or a different unit.

  • Assuming an optional power supply is essential

    According to its manual, the iFi ZEN DAC 3 can be powered via USB. The separate DC power supply isn’t included, and the manufacturer describes it as an optional upgrade.

    Check what’s included with the specific offer. If it suits your setup, you can also consider powering it via USB.

Brands worth considering

FiiO

With the KA13 and K11, FiiO offers different form factors for small desks and dedicated desktop setups.

  • FiiO lists USB-C, 3.5 mm and 4.4 mm outputs for the KA13; its power output figures vary by operating mode and output.
  • According to FiiO, the K11 has a volume control, 6.35 mm and 4.4 mm headphone outputs, and RCA line-out.
  • The K11 measures 147 × 133 × 32.3 mm, including its feet, according to the manufacturer, and needs a DC power supply.

iFi audio

The ZEN DAC 3 is a USB desktop DAC for headphones, with analogue signal output for connecting other audio equipment.

  • According to iFi, it has 6.35 mm and 4.4 mm headphone outputs, switchable gain, and analogue outputs with fixed or variable volume.
  • The manual describes power via USB or a separate DC power supply.
  • The DC power supply isn’t included, according to the manual, and a desktop setup needs space.

AudioQuest

The DragonFly Cobalt is a dongle option for a space-saving USB DAC setup.

  • AudioQuest specifies a maximum resolution of 24-bit/96 kHz and lists a USB-C extension cable as included.
  • Its specified limit isn’t high enough for 192 kHz files if you want to output them to the DAC natively at 192 kHz.

Joybuy products on this topic

This selection includes USB DACs for headphone and desktop setups. Before buying, check that the connections and file formats are compatible with your devices.

Nobsound Q4 USB audio gaming DAC with Bluetooth

Nobsound Q4 USB audio DAC with Bluetooth

For a dedicated desktop setup when you need USB playback, a headphone amplifier and extra audio connections.

  • The product description lists PC USB and playback up to 24-bit/192 kHz.
  • Headphone amplifier for 16–300 Ω.
  • Optical and coaxial S/PDIF inputs, plus RCA outputs.
  • A remote control and tone controls are also listed.
View at Joybuy

Frequently asked questions

Is the Hi-Res rating on a DAC enough for my audio files?

No. Check your files’ format and sample rate, as well as the input you’re actually using. AudioQuest specifies a maximum of 24-bit/96 kHz for the DragonFly Cobalt; FiiO lists up to 32-bit/384 kHz via USB for the K11, but only up to 24-bit/96 kHz via its optical input. If you use Qobuz on PC, you should also check your quality and playback settings.

How do I get started with a new headphone DAC?

Connect the right output and start at a low volume. The iFi ZEN DAC 3 manual specifically warns against switching PowerMatch at high volume, so turn the volume down before changing the gain mode.

Do I need to buy a separate power supply for the iFi ZEN DAC 3?

A separate power supply isn’t essential for the laptop or PC connection described in the manual: iFi specifies power via the USB-A-to-USB-C cable. A separate 5 V DC power supply isn’t included and is recommended by the manufacturer as an optional upgrade.

Which connections should I check against my headphones before buying?

Check that your headphone plug matches the DAC output, and compare the power output rating for the right load and operating mode. For the FiiO KA13, the manufacturer’s figures vary depending on whether you use the 3.5 mm or 4.4 mm output and whether Desktop Mode is enabled; the iFi ZEN DAC 3 has 6.35 mm and 4.4 mm outputs, according to its manual.