If your existing headphone output drives your wired headphones properly and without distracting background noise, you don’t necessarily need a new USB DAC to compare recordings. A separate device may be worth considering if you need a different connection, more precise volume control or additional inputs. Match playback levels and keep sound settings consistent so you’re comparing the recordings themselves.
Who could benefit from a USB headphone DAC?
Listeners comparing recordings at their desk
When comparing existing recordings through the same headphones, it helps to match playback levels and keep sound settings consistent. The ITU sets out tightly controlled conditions for assessing small differences in audio systems.
Users of demanding wired headphones
For your headphones, the right plug and the specifications for the specific output and connected load are what matter. For example, FiiO’s specifications for the K11 vary according to the output and load.
Listeners with sensitive in-ear monitors
If you use sensitive in-ear monitors, look for a quiet background and start at a low volume. RME describes the ADI-2 DAC FS as having an especially low-noise IEM output; this is a manufacturer’s claim about that model.
What should you look for when buying?
For comparing recordings at home, a suitable headphone output and consistent playback settings matter more than any single power rating.
| What matters |
What to check before buying |
Who should pay particular attention? |
| Consistent levels and settings |
Check that the volume control is easy to reach and that gain levels are available; match recording levels and keep sound settings consistent while comparing. |
If I want to compare recordings directly, I want matching levels and unchanged sound settings. Around 36 % of consumers put level control first. |
| Compatibility with your headphones |
Compare the plug and the output specifications for the specific socket and headphone load. |
If I want to keep using my wired headphones, the plug and output need to be compatible. Around 29 % of consumers put headphone compatibility first. |
| A quiet background and volume control |
For sensitive in-ear monitors, check for a suitable output and low gain; start at a low volume. |
With sensitive in-ear monitors, I want to hear as little background noise as possible in a quiet room and adjust the volume carefully. Around 21 % of consumers prioritise a quiet background. |
| Inputs and setup |
List your source devices and the connections you need; check the power supply and any recording inputs. |
If I want to connect several sources or record as well, I check the inputs and power supply first. Around 14 % of consumers put connections and setup first. |
Common buying and comparison mistakes
-
Assuming the highest output power rating applies to your headphones
Power ratings can vary depending on the socket and connected load. Check the specifications for the output you actually plan to use, and make sure it matches your headphone plug.
An incompatible cable or device could mean you need to make an additional purchase.
-
Confusing more volume or bass with better recording quality
Different levels or sound settings can affect what you hear. Match the recording levels and leave playback settings unchanged between listens.
-
Treating a fixed-level output as if it had volume control
On the iFi ZEN DAC 3, the ‘Fixed’ mode bypasses the volume control for the rear output. Check the output mode before use, and turn down the volume on any connected active speakers before switching on.
Otherwise, connected equipment could receive an unexpectedly high signal level.
Brands to consider
The following notes relate to the product ranges mentioned and are no substitute for checking compatibility with your headphones and connections.
FiiO
The K11 is a desktop DAC with USB and other digital inputs, designed for a dedicated listening setup.
- The manufacturer lists 6.35 mm and 4.4 mm headphone outputs, as well as gain levels.
- Power ratings vary by output and load; the K11 needs an external 12 V/2 A power supply.
RME
The ADI-2 DAC FS is designed for a dedicated listening setup where a separate IEM output and playback settings are required.
- For this model, RME describes an especially low-noise IEM output, DSP features and an external power supply.
- These manufacturer claims do not establish a general sound quality advantage over other devices.
iFi audio
The ZEN DAC 3 combines USB-C playback with two headphone sockets and rear analogue outputs.
- The manual says you can switch the gain and rear output mode.
- In ‘Fixed’ mode, the volume control is bypassed for the rear output; keep sound settings consistent when comparing recordings.
Creative
The Sound Blaster G8 is an option if you genuinely need two USB sources and the ability to mix them.
- Creative documents two USB-C inputs and audio processing features.
- Extra inputs and sound features aren’t necessarily needed for a straightforward recording comparison.
Focusrite
The fourth-generation Scarlett 2i2 is an audio interface for playback and additional analogue recording.
- The manufacturer’s specifications list recording inputs and a separately controlled headphone output.
- This model is specified with a 50 Ω output impedance; check that it’s suitable for your headphones.
Products at Joybuy to consider
Related products coming soon.
Frequently asked questions
Should I turn off all sound features when comparing recordings?
No. What matters is keeping the output, volume matching and sound settings the same for each recording you compare. The ZEN DAC 3, for example, has a switchable bass feature that could affect your comparison if the setting changes. The ITU describes tightly controlled test conditions for assessing small differences in audio; this doesn’t mean there’s a prescribed process for comparing recordings at home.
What should I bear in mind when connecting it for the first time?
First, check that the plug fits the headphone socket, then start at a low volume. iFi warns against changing the gain on the ZEN DAC 3 without turning the volume down first. The German Environment Agency recommends listening to music through headphones at a moderate volume.
What costs and return rights should I check when buying online?
Check the specific listing for the power supply you need and what’s included; the manufacturer specifies 12 V/2 A for the FiiO K11. The German consumer advice centre says that consumers buying online in Germany generally have a 14-day right to cancel, starting from the conclusion of the contract or receipt of the goods ordered. Tell the seller you’re cancelling, and check the return conditions and exceptions that apply to your situation.
What should I know about CE marking and disposing of an old DAC?
According to EU rules, whether CE marking is required depends on whether the product is covered by harmonised rules that explicitly require it; it isn’t an independent quality mark. The German Federal Environment Ministry advises that electrical and electronic waste must be taken to an authorised collection point and must not be put in household rubbish.