Who might need a USB headphone DAC?

Listeners with the wrong audio output selected

If you work across two monitors and sound is coming through your laptop or monitor speakers by mistake, check which audio output is selected first. Microsoft Support points out that you can choose a device when multiple audio outputs are available.

Headphone users short on desk space

If space is tight, weigh up the headphone connection you need, the space available, the cables and the power supply together. FiiO, iFi audio and Pro-Ject Audio Systems offer different desktop designs and connection options.

Listeners who make calls or use speakers

If you want to use an analogue microphone or headset as well as headphones, and perhaps powered speakers too, check the specific inputs and outputs and how the outputs work. Creative and iFi audio describe these features for selected models.

What should you look for when buying?

Buying priority What to check before buying Who is it most important to?
Correct audio output With your headphones connected, check which output device is active. Only then decide whether you need an additional USB audio connection. If I want to stop sound coming from my laptop or monitor even though my headphones are connected, choosing the right device comes first. Around 36% of consumers prioritise the correct audio output.
Headphone connection and amplification Check that the connector matches the specific model’s output; assess power ratings only alongside the output and stated load. For wired headphones, I want a suitable connection and clear volume control. Around 29% of consumers put headphone compatibility first.
Space and power supply Allow room for the device and its cables; check whether the USB connection provides enough power for the specific device or whether it needs a power adapter. If there’s hardly any room for another device on my dual-monitor desk, size and cabling are my main concerns. Around 21% of consumers prioritise desk space and power supply.
Calls and switching to speakers Check specifically for any microphone or headset inputs you need; for powered speakers, find out whether the output is fixed or adjustable. If I want to switch between headphones, calls and speakers at the same workstation, I need the right inputs and outputs for each. Around 14% of consumers prioritise these extra connections and the ability to switch between outputs.

Avoiding common buying mistakes

  • Buying a DAC when the wrong output device is selected

    When several audio devices are available, Windows may use an output other than your connected headphones.

    Before choosing a product, check the current sound output with your headphones connected.

  • Confusing an analogue headphone amplifier with a USB DAC

    The Pro-Ject Head Box S2 Digital has a USB input; the Head Box S2 without “Digital” is a different model and doesn’t connect in the same way.

    Check the full model name and make sure it has a digital USB audio input.

  • Comparing output power without checking the connection and load

    FiiO specifies 1,400 mW for the K11 at 32 Ω through its balanced output. This figure doesn’t apply to other outputs.

    Compare power ratings only for the output you’ll actually use and an appropriate test load, taking your headphones’ requirements into account.

  • Assuming the speaker output is always adjustable

    On the iFi ZEN DAC 3, the “Fixed” setting for the rear output bypasses the volume control.

    Before connecting powered speakers, check the output mode and their own volume controls. Start with the volume low.

Notable brands and models

FiiO

The K11 is a desktop USB DAC with optical and coaxial inputs, plus headphone and RCA outputs.

  • FiiO says the K11 has three gain settings. The 1,400 mW rating applies to 32 Ω through the balanced output.
  • Check the power supply and space needed for the specific version; don’t apply the power rating to other outputs.

iFi audio

The ZEN DAC 3 combines USB-C audio with 6.3 mm and 4.4 mm headphone outputs, plus rear outputs for a desktop setup.

  • The manual describes switchable fixed and variable rear outputs, along with a gain switch.
  • “Fixed” bypasses the volume control for the rear output. Check that the volume controls on your connected speakers are suitable.

Creative

The Sound Blaster X4 is a USB sound card for workstations where you use an analogue microphone or headset and speakers as well as headphones.

  • Creative lists microphone and headset inputs for this model, as well as the ability to switch between speakers and headphones.
  • The model specifications don’t prove an independent, audible improvement in sound quality or compatibility with every headset. Check your device’s connections.

Pro-Ject Audio Systems

The Head Box S2 Digital is a desktop DAC with USB-B, optical and coaxial inputs, a 6.3 mm headphone socket and an RCA output.

  • According to the model manual, the rear output is muted when headphones are connected.
  • The Head Box S2 without “Digital” isn’t the same as this USB DAC. Also take note of the USB power requirements.

TOPPING

The DX3 Pro+ is a desktop DAC for multiple digital sources, with a USB input, a 3.5 mm headphone socket and an RCA line output.

  • The manual distinguishes between headphone, line and combined output modes for the DX3 Pro+.
  • These details apply to the DX3 Pro+ and not automatically to other TOPPING models.

Joybuy products for your desk

These product options include a desktop USB DAC with a headphone amplifier and a compact USB audio adapter for 3.5 mm headphones or headsets.

Nobsound Q4 USB DAC with headphone amplifier

Nobsound Q4 USB DAC with headphone amplifier

For adding a USB audio connection to your desk when you want to connect headphones and powered speakers.

Listed features include USB, optical and coaxial inputs, Bluetooth, a remote control and RCA outputs.

The stated headphone impedance range is 16–300 Ω. An external DC power supply is required; use a suitable power supply.

Joybuy
HOCO UPA32D USB audio adapter to 3.5 mm

HOCO UPA32D USB audio adapter to 3.5 mm

For a computer with USB-A and wired headphones or a headset with a 3.5 mm connection.

The description lists support for headsets with or without a microphone, a 15 cm cable and a weight of 9.5 g.

Joybuy

Frequently asked questions

Do I need to buy a DAC straight away to stop sound coming from my laptop or monitor speakers?

No, not necessarily. If you already have a suitable headphone socket, first check which audio output device is selected. Microsoft Support recommends this when several output devices are available; a DAC is an additional hardware option.

How do I set up a USB DAC in Windows if sound is still coming from the wrong speaker?

Once the device is connected, select your preferred sound output in Windows. If you still can’t hear sound through your headphones, check that the right audio device is selected. You’ll find model-specific driver advice in the relevant manual.

What should I bear in mind when switching to powered speakers?

Before connecting them, check whether the line output is fixed or adjustable and whether it stays active when headphones are plugged in. On the iFi ZEN DAC 3, “Fixed” bypasses the rear volume control; on the Pro-Ject Head Box S2 Digital, the rear output is muted when headphones are connected. Start with the volume low when switching outputs.

Who is responsible for your statutory rights if an online purchase in Germany is faulty?

For purchases from a business seller, European Union consumer information sets out a minimum legal guarantee of two years from receipt of the goods. If something is faulty, contact the seller. An additional manufacturer’s warranty doesn’t replace these rights.

What does the CE marking on an audio device tell you?

According to information from the European Union, the manufacturer uses the CE marking to declare that a product meets the applicable harmonised EU product requirements. CE marking is only required for products covered by the relevant rules. It isn’t a comparison of sound quality or proof that a particular listing meets every requirement.