Which DAC is right for you?

For listeners short on desk space

If you use wired headphones with your computer and want to keep your desk as clear as possible, a USB dongle is worth considering. FiiO lists the KA13 at around 56.5 × 22 × 10.5 mm.

For listeners with demanding headphones

If the right headphone connection and precise volume control matter more to you than the smallest possible design, check that the output and amplifier power suit the load you’ll be using.

For listeners with headphones and active speakers

If you want to switch between headphones and active speakers at the same desk, look for suitable analogue outputs and check whether their level can be set to fixed or variable.

What should you look for when buying?

USB dongle

A good fit if: You’re short on desk space and the connections suit your headphones and source.

The trade-off: A dongle may dangle from its cable, and it won’t necessarily have an easy-to-reach volume control or speaker outputs.

USB-powered desktop unit

A good fit if: You want an easy-to-reach volume control or extra analogue outputs.

The trade-off: The unit takes up desk space. The ZEN DAC 3 doesn’t include a separate 5 V power supply; Topping says the DX1 II may need a Y-cable and an external power source if USB power is insufficient.

Desktop unit with extra digital inputs

A good fit if: You want to connect sources via optical or coaxial inputs as well as USB. According to the manufacturer, the FiiO K11 has both.

The trade-off: FiiO says the K11 requires an external 12 V power supply. If you’ll only use it with a computer and headphones, you may not need the extra inputs.

Buying priority What to check Who it matters most to
Space and ease of use Check the design, cable layout and volume control position against the space you have available. If I have very little room left on my desk, I want my DAC to take up as little space as possible. Around 31% of consumers prioritise saving space.
Headphone connection and amplification Check the connector and power for the specific output you plan to use, and make sure they suit the load. If my existing headphones need a particular connection, I want to be sure the output and amplification are a good match. Around 25% of consumers prioritise this compatibility above all else.
Lossless playback chain Check your source, music service and quality settings. For Apple Music, also check what’s needed to play at sample rates above 48 kHz. If I want to listen to lossless music, my source settings need to match the files I’m using. Around 25% of consumers say this playback chain matters most to them.
Connecting active speakers Check the input your speakers need and whether you require a fixed or variable output level. If I want to use active speakers at the same desk later on, I’ll need a suitable analogue output. Around 19% of consumers list this as their main priority.

Common buying mistakes

  • Choosing solely on the basis of the highest advertised sample rate

    Lossless playback also depends on your source settings and the files you use. A file that can be played won’t necessarily be decoded natively at its original resolution.

    First, check your source, the files you want to play and the DAC formats they require. Apple says that an external DAC is needed for certain device set-ups to play Apple Music songs above 48 kHz.

  • Comparing power ratings from different headphone outputs directly

    FiiO’s figures for the KA13 depend on factors including whether you use the 3.5 mm or 4.4 mm output, the load and desktop mode. A single power rating therefore won’t necessarily apply to every connection.

    Only compare figures for the output and load you actually plan to use, and make sure the headphone connector is compatible.

  • Assuming USB power will work equally well with every source

    Whether a desktop DAC gets enough power over USB also depends on the connected source.

    Before buying, check the power available from the source you plan to use and the manufacturer’s guidance.

    If USB power is insufficient, the Topping DX1 II may need a Y-cable and an external power source, neither of which is included.

Key brands at a glance

FiiO

The KA13 and K11 product lines offer different designs and connection options.

  • FiiO lists 3.5 mm and 4.4 mm headphone outputs for the KA13. The K11 also has optical and coaxial inputs, among others.
  • The K11 requires an external 12 V power supply. Power ratings apply only under the specified connection and load conditions; claims about sound are made by the manufacturer.

iFi audio

The ZEN DAC 3 is a USB desktop unit for headphones, with the option to connect active speakers.

  • The manual lists two headphone sockets, as well as RCA and 4.4 mm analogue outputs with fixed or variable levels.
  • A separate 5 V power supply isn’t included. Descriptions of sound effects from additional circuitry are manufacturer claims.

Topping

The DX1 II is a desktop unit that can transfer audio data and power over USB.

  • According to Topping, the USB connection can carry both data and power when there’s enough power available.
  • If the source can’t provide enough power, you may need an extra Y-cable and external power source, neither of which is included.

AudioQuest

The DragonFly Black v1.5 is a USB stick DAC for listening spaces where desk space is limited.

  • AudioQuest lists native decoding up to 24-bit/96 kHz.
  • Being able to play a file doesn’t prove it’s decoded natively above this limit.

Related products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I always need an external DAC for lossless music?

No, not necessarily. Apple says an external DAC is needed for certain device set-ups to play songs at sample rates above 48 kHz. Check your device model, source and quality settings.

How can I avoid a sudden jump in volume when connecting or switching settings?

Turn the volume down before connecting or changing the gain, then raise it carefully. The iFi ZEN DAC 3 manual warns against switching PowerMatch at a high output level.

Does a desktop DAC always need an additional power supply?

No. The Topping DX1 II can draw data and power over USB if there’s enough power available. For a source with a lower power output, Topping recommends an extra Y-cable and an external power source. The FiiO K11, on the other hand, requires an external 12 V power supply.

What should I look out for when it comes to labelling and disposal in Germany?

As part of its market surveillance, the Bundesnetzagentur checks, among other things, whether CE marking is present and correct. This doesn’t confirm that any model mentioned here complies with the requirements. According to stiftung ear, electrical waste from private households must not be put in general household rubbish; it should be taken to an appropriate collection point.