Who is this selection for?

Anyone comparing recordings at their desk

If you switch between existing recordings, you’ll want to keep playback levels and sound settings consistent.

Listeners by a bright window

You’ll want controls that don’t rely solely on being able to read a display clearly in the light at your spot. Adjustable brightness is no substitute for checking the screen where you plan to use it.

People using wired headphones

Check that the output is suitable and refer to the specifications for the exact connection you’ll use, rather than focusing on a single power rating.

What should you look for when buying?

First, check whether your existing output suits your headphones and how you want to control playback. Then compare the DAC’s connections and consider whether a display, extra inputs or a dedicated volume control would genuinely be useful at your listening spot.

Buying priority What to look for Who is this especially important for?
Consistent playback Check the volume control and gain setting. Match recording levels and keep sound features consistent when comparing. When I compare recordings, I want to keep volume and sound settings consistent. Around 36% of consumers prioritise a repeatable comparison level.
The right headphone connection Check the plug, output and power rating for the relevant headphone load together; start at a low volume. With my existing wired headphones, it’s important that the plug and output are compatible. Around 29% of consumers prioritise the right connection and a usable volume range.
Controls by a bright window If possible, test the device where you plan to use it. Consider reflections, controls and the menus you need; brightness settings alone don’t tell you how easy the display is to read there. By a bright window, I want to adjust the volume without relying on a display that’s difficult to read. Around 21% of consumers focus on how easy the device is to use at their window-side spot.
Connections, space and power Check the inputs and outputs you need, the space available and the power supply for the specific model. For my desk setup, I only want to plan for the connections and cables I actually need. Around 14% of consumers focus mainly on sources, space and power.

Avoid common buying mistakes

  • Mistaking differences in recording volume for differences in DAC sound

    Differences in programme loudness make comparisons harder. Switching sound modes can also affect the result.

    Match the loudness before comparing, and keep gain, EQ and other sound features deliberately consistent. The EBU describes loudness measurement for normalising broadcast programmes; its target levels are not prescribed listening volumes for home use.

  • Choosing the highest power rating without considering the output and load

    For the FiiO KA13, the manufacturer’s specifications vary depending on the socket, load and operating mode.

    First check your headphone plug, then compare the specification for the exact output and load you’ll use. Start at a low volume.

    Depending on your headphone connection, you may need a suitable cable or adapter.

  • Assuming adjustable display brightness means the screen will be easy to read by a window

    Brightness settings describe an adjustment on the device, not how easy the screen is to read under the lighting and reflections at your desk.

    If possible, check the menus and display where you plan to set up the device, and consider having a control you can reach directly.

  • Using a fixed line output like a volume-controlled speaker output

    For the iFi ZEN DAC 3, the manufacturer’s manual states that the Fixed setting bypasses the volume control for the rear output.

    Before connecting active speakers, check the output mode and volume control. Start with the level set low.

Key brands at a glance

FiiO

The KA13 and K11 R2R cater for different setups: a compact USB DAC and a desktop device.

  • For the KA13, FiiO lists buttons and 3.5 mm and 4.4 mm outputs. The K11 R2R has a rotary control, optical and coaxial inputs, and three display brightness levels.
  • Power specifications vary by model, output and operating mode. The brightness settings don’t prove that the display will be easy to read in direct window light.

iFi audio

The ZEN DAC 3 is a desktop USB DAC for wired headphones and, if required, active speakers.

  • The manufacturer’s manual lists a volume control and 6.35 mm and 4.4 mm headphone outputs. The rear output can be set to fixed or variable.
  • Set PowerMatch and XBass+ deliberately and keep them consistent when comparing recordings. According to the manual, the Fixed setting bypasses the volume control for the rear output.

RME

The ADI-2 DAC FS is worth considering for a dedicated listening spot if you need a separate IEM output and additional playback settings.

  • RME describes an IEM output and DSP features such as EQ and crossfeed.
  • These features don’t prove a sound advantage, or indicate how easy the display is to read in window light.

TOPPING

The DX3 Pro+ is a desktop DAC with USB and other inputs, as well as a headphone output.

  • The manufacturer’s manual lists optical, coaxial, USB and Bluetooth inputs, plus line and headphone outputs. It also describes an LED display and how to adjust its brightness.
  • That doesn’t tell you how the display performs in the specific lighting at your window-side spot.

MOTU

The M2 is a USB audio interface rather than a dedicated playback DAC. It may be useful if you also plan to record with a microphone or instrument.

  • MOTU’s specifications list recording inputs, a separate headphone volume control and LCD level meters.
  • The additional recording features may be unnecessary if you only want to compare existing recordings; the LCD’s readability by a window isn’t confirmed either.

Joybuy products for connecting headphones

USB-A to 3.5 mm audio adapter for wired headphones.

HOCO UPA32D Clever USB to 3.5 mm audio converter

HOCO UPA32D Clever USB to 3.5 mm audio converter

An option to consider if your computer has a USB-A port and your wired headphones need a 3.5 mm connection.

View at Joybuy

Frequently asked questions

How can I compare two recordings as fairly as possible with a DAC?

Keep your headphones, playback chain and sound settings consistent, and match differences in recording loudness using a suitable metering or normalisation feature. The EBU describes loudness measurement for normalising broadcast programmes; its broadcast target levels are not prescribed listening volumes for home use.

Does a DAC by a bright window need a display?

No. A control you can reach directly may be enough for simple volume adjustments. Display brightness settings are listed for the FiiO K11 R2R, but they don’t prove that you’ll be able to read the screen clearly in the light at your particular spot.

Can I also make recordings through the headphone output?

A headphone output alone doesn’t mean a device can record. If you want to record with a microphone or instrument, check specifically for suitable inputs; MOTU describes these on the M2 USB audio interface.

What should I know about a fixed line output?

Before connecting active speakers, check whether the line output is set to fixed or variable. For the iFi ZEN DAC 3, the manufacturer’s manual states that the Fixed setting bypasses the volume control for the rear output.