If you play concert recordings on your computer, choose a DAC based first on your headphone connection, then on the controls you want to be able to reach at your standing desk. Depending on the model, a desktop unit may offer extra inputs, gain settings or speaker outputs. These features should only influence your choice if they suit your setup. Compare recordings at a similar perceived volume wherever possible, and start at a low level after changing the gain.
Which setup is right for you?
Comparing recordings
If you listen to several downloaded recordings one after another, an easy-to-reach volume control is useful. The European Broadcasting Union explains that peak normalisation alone does not reliably remove loudness differences between programmes.
Matching your headphones
If you want to keep using your wired headphones, the plug and socket need to be compatible, and you should be able to control the gain. FiiO and iFi audio list different connections and gain settings for different models.
Using multiple sources
If you want to switch between headphones, speakers or several audio sources at the same desk, check whether you need to switch between them or mix sources simultaneously. FiiO, iFi audio and Creative describe different input and output features across their respective models.
What should you look for when buying?
First check the headphone connection and how easily you can reach the volume control, then consider the power supply and space available on your desk. Extra inputs and outputs matter most if you’ll actually use them in your setup.
| What matters |
What to check before buying |
Who should consider it? |
| Volume and ease of use |
Check the position of the control and what happens when you change the gain; compare recordings at a similar perceived volume. |
If I want to compare several recordings directly while standing, I need to be able to adjust the volume easily. Around 36% of consumers who prioritise comparing volume pay particular attention to this. |
| Headphone connection |
Check that the plug format, cable and output are compatible. |
If I want to connect my existing wired headphones, the socket and cable need to match. Around 29% of consumers put headphone compatibility first. |
| Desk setup |
Check the power requirements, available computer connections, what’s included and how much space it needs. |
If I want to set the device up at my standing desk, accessible connections and tidy cable routing are important. Around 21% of consumers prioritise their desk setup. |
| Extra sources and outputs |
Decide whether you want to switch between sources or mix them simultaneously; if you’re using speakers, check how their volume is controlled. |
If I also want to connect speakers or other audio sources, I need the right connections and features. Around 14% of consumers consider extra sources and outputs their top priority. |
Avoid common buying mistakes
-
Assuming the louder recording is automatically better
A louder recording may sound preferable in a direct comparison, even if the volume hasn’t been matched. The European Broadcasting Union points out that peak normalisation alone can leave significant loudness differences.
Where possible, compare the same passage at a similar perceived volume. Broadcast loudness standards do not set a required target level for personal recordings.
-
Assuming every pair of headphones uses a 4.4 mm cable
A socket is only useful if your headphone plug and cable are compatible. FiiO and iFi audio list both 4.4 mm and other types of headphone connection on certain models.
Check the plug and compatible cable wiring before choosing an output.
-
Treating a fixed speaker output as a volume-controlled one
On the iFi ZEN DAC 3, the rear output bypasses the device’s volume control when set to ‘Fixed’.
Before connecting active speakers, check where their volume will be controlled and start at a low level.
-
Assuming the power supply from ‘USB DAC’ alone
Requirements vary by model. FiiO specifies a separate 12-V/2-A power supply for the K11. The iFi ZEN DAC 3 manual describes USB power, as well as an optional 5-V connection.
For the specific model, check the data connection, power connection and what’s included separately.
Key brands at a glance
FiiO
The FiiO K11 is a desktop DAC and headphone amplifier with USB, optical and coaxial inputs.
- FiiO lists a volume control, three gain settings, 6.35 mm and 4.4 mm headphone outputs, and a rear line output for the K11.
- FiiO says the K11 needs a separate 12-V/2-A power supply. These specifications do not automatically apply to other FiiO models.
iFi audio
The ZEN DAC 3 is described as a USB desktop option with headphone and switchable volume-controlled speaker outputs. The ZEN Air DAC is a simpler USB DAC/headphone amplifier option.
- The ZEN DAC 3 manual lists an analogue control, switchable gain, and 6.35 mm and 4.4 mm headphone sockets.
- On the ZEN DAC 3, the rear output bypasses the control when set to ‘Fixed’. The manual says a separate 5-V power supply is not included; these features do not necessarily apply to the ZEN Air DAC.
Creative
The Sound Blaster G8 is designed for a setup where you want to hear two separate USB audio sources at the same time.
- Creative describes the G8 as having two USB-C audio inputs with mixing functionality.
- If a computer is your only source, the dual-source feature isn’t essential to your choice. Manufacturer claims about sound and amplifier power do not prove an advantage for individual concert recordings.
Joybuy products for connecting to your computer
The products shown are for a simple USB-A to 3.5 mm connection between a computer and headphones or a headset. Check whether this connection suits your setup, or whether you need extra controls and inputs.
No image available
HOCO UPA32D Clever Audio Converter USB to 3.5
Designed for a computer with USB-A and headphones or a headset with a 3.5 mm connection.
15 cm cable; weight: 9.5 g.
According to the product description, it supports headphones with or without a microphone.
View at Joybuy
Frequently asked questions
Can I play downloaded recordings directly through the DAC without a computer?
The USB DACs described here need a connected source device. A USB connection alone doesn’t mean the device can store or play files independently. Check for this feature specifically if you want to leave your computer switched off.
How can I compare two recordings with different volume levels?
Where possible, listen to the same passage at a similar perceived volume. The European Broadcasting Union points out that peak normalisation alone can leave significant loudness differences; its broadcast recommendation does not set a target level for personal recordings.
What should I bear in mind when connecting headphones or changing the gain?
Choose a socket that matches your headphone plug and start at a low level. The iFi ZEN DAC 3 manual warns against switching PowerMatch at a high volume. The World Health Organization points out that volume and listening time together affect the risk of hearing damage.
Do I need an extra power supply for the iFi ZEN DAC 3?
According to the manual, the device can be powered via the included USB-A to USB-C connection. A separate 5-V power supply is not included; whether the optional additional power supply suits your setup depends on how you use it.
What rights apply to online purchases in Germany?
The Verbraucherzentrale explains that online contracts generally come with a 14-day right to cancel, and distinguishes the statutory legal guarantee against the seller from a voluntary warranty. Check the terms and conditions of the specific seller.