Which option suits you?

Comparing recordings at a fixed desk

If you listen to the same passages repeatedly, look for an easy-to-reach control and keep the volume and sound processing consistent on every listen. Various FiiO and iFi audio models feature a control or switchable sound functions.

Headphones with more demanding connection requirements

First check which socket your cable needs, then check the technical specifications for that specific output and your headphones. FiiO and Focusrite list connection and output specifications for individual models.

Moving between office desks

If you want to take your DAC with you and keep your shared desk free of clutter, a compact USB device or dongle could be a good fit. Check the connection and computer compatibility, too. iFi audio notes that a driver download is required to use the uno with a PC.

What should you look for when buying?

First check whether your existing headphone output is good enough. If it isn’t, the cable connection, controls you want and whether you’ll use the device at a fixed or shared desk will help you decide between a compact DAC, a desktop unit or an audio interface.

What you need What to check before buying Who it matters to most
Consistent comparison conditions Controls, gain and sound functions; use the same source, headphones and settings for each listen. If I compare the same passages repeatedly, I want to be able to control the volume and sound processing. Around 36% of consumers share this main concern.
The right headphone connection Match the socket to the cable; only use output specifications for the socket you’ll actually use and comparable loads. If I want to use my existing headphones without an unsuitable connection, I check the plug and relevant output specifications first. Around 29% of consumers put this compatibility first.
Consideration and careful listening Consider the headphone design and sound leakage at your desk; start at a low volume after changing headphones or gain. If I’m listening in a shared office, I want to be considerate of my colleagues and set the volume carefully. Around 21% of consumers prioritise this.
Space and set-up Check the USB connection, computer compatibility and whether a separate power supply is needed. If I share my workspace or want to take my DAC with me, a small footprint and a suitable power supply matter to me. Around 14% of consumers prioritise a straightforward set-up.

Common buying mistakes

  • Assuming a high sample rate or maximum power means better comparisons

    Power specifications apply to particular outputs and loads. A format specification doesn’t tell you whether you’re comparing recordings at the same volume and with unchanged sound processing.

    First check the headphone connection, then compare technical specifications on a like-for-like basis. Keep the source, volume and sound functions consistent throughout your listening comparisons.

  • Choosing an audio interface just for its headphone output

    An interface such as the fourth-generation Focusrite Scarlett Solo also has inputs for a microphone or instrument. If you’re only listening to audio, you may not use these features. Focusrite lists an output impedance of 50 Ω for this model’s headphone output.

    If you only listen to existing recordings, first check your current output or consider a playback-only DAC. Choose an interface if you’ll actually use its recording inputs.

    An interface can also take up desk space, even if you don’t use its recording inputs in the office.

  • Expecting a USB DAC to block sound from your headphones

    How much sound is blocked depends on the headphones and how you use them, not on the DAC. A DAC won’t stop sound leaking out or replace careful volume control.

    Check which headphone design suits your workspace, and don’t turn the volume up just to drown out office noise.

Key brands at a glance

FiiO

The K11 and KA15 are designed for different uses: a desktop unit for a fixed set-up and a portable USB dongle.

  • According to FiiO, the K11 has a control and a 6.35-mm headphone output. The KA15 has 3.5-mm and 4.4-mm outputs, as well as a ten-band PEQ.
  • FiiO says the K11 needs an external DC 12 V/2 A power supply. For consistent listening comparisons, keep the KA15’s PEQ settings unchanged.

iFi audio

The uno is a compact, USB-powered DAC; the ZEN DAC 3 is designed for a fixed desktop set-up with several headphone connections.

  • The uno manual lists a 3.5-mm output. For the ZEN DAC 3, iFi audio documents 6.35-mm and 4.4-mm outputs, along with switchable gain and XBass+.
  • iFi audio says a driver download is required to use the uno with a PC. Gain and XBass+ change the listening conditions on the ZEN DAC 3; the manual recommends turning the volume down before switching.

Focusrite

The fourth-generation Scarlett Solo is a USB audio interface for anyone planning to record with a microphone or instrument as well as listen to audio.

  • Focusrite documents the inputs and a separate headphone control.
  • Focusrite lists an output impedance of 50 Ω for this model’s headphone output. If you’re only listening to audio, you may not need the recording inputs.

RME

The ADI-2 DAC FS offers several playback settings and a dedicated IEM output.

  • RME lists parametric EQ and Crossfeed, as well as an output designed specifically for in-ear headphones.
  • To keep listening comparisons consistent, make sure any additional sound processing and settings remain unchanged.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I compare recordings without judging the sound modes as well?

Use the same source and headphones, and keep the volume, gain and any EQ or bass function consistent. XBass+ on the iFi ZEN DAC 3 and the PEQ on the FiiO KA15 are additional settings you should leave unchanged for a like-for-like comparison.

Do I need an adapter for headphones with a 3.5-mm plug?

It depends on the DAC output you choose. The iFi uno has a 3.5-mm headphone socket, according to its manual; the FiiO K11 and iFi ZEN DAC 3 are among the models with 6.35-mm sockets. If you use an adapter, check that it’s the right connection, and only use a 4.4-mm output with a compatible headphone cable.

What should I bear in mind during longer listening sessions?

Start at a low volume, especially after changing headphones or gain. The iFi ZEN DAC 3 manual warns against high volume when switching; according to the European Commission, the risk of hearing damage depends on both volume and listening time.

When is an audio interface a better choice than a playback-only DAC?

An audio interface is mainly a good fit if you also want to connect and record a microphone or instrument. If you only listen to existing recordings, you may not use its inputs; first check whether your current headphone output is good enough.

What are my rights if a product is faulty in Germany?

For a faulty purchase, § 437 BGB provides for remedies including repair or replacement, subject to the statutory conditions. For movable goods, claims for defects generally become time-barred two years after delivery under § 438 BGB. A voluntary manufacturer’s guarantee is separate from these rights.