Solo speakers recording with the fan running
If you’re recording the audio label on your own and can keep the distance and microphone position consistent, you can direct the mic towards your voice.
For recording a single gallery audio label with the fan running, an adjustable USB microphone with a cardioid pickup pattern and a close, steady speaking position is a sensible place to start. A dynamic model is particularly suitable if you can maintain that position. A USB condenser microphone with easily accessible level and monitoring controls is another option if a test at the recording spot shows little intrusive fan noise. Audacity describes noise reduction for constant sounds such as fan noise, but it cannot make up for a poor recording.
If you’re recording the audio label on your own and can keep the distance and microphone position consistent, you can direct the mic towards your voice.
For short recordings at a computer, easily accessible level controls and headphone monitoring make it easier to check your voice during a test recording.
If you can listen to a test recording and reduce steady fan noise afterwards if needed, the quality of the unedited recording should also factor into your choice.
For a clear gallery audio label, the key considerations are your speaking position, control while recording and a setup that works at your computer.
| Buying criterion | What to check | Who is it important to? |
|---|---|---|
| Clear speech despite fan noise | Check the cardioid pickup pattern, which side of the microphone to speak into, its positioning and a test recording with the fan running. | If you’re recording alone with the fan running, a clear voice matters more to you than correcting the audio afterwards. Around 42% of consumers put speech clarity in the presence of fan noise first. |
| Control over levels and recording | Look for a gain control or level indicator and a headphone output; record a few quiet and more emphatic sentences as a test. | If you want to catch quiet or distorted sections before the final recording, easily accessible controls are useful. Around 25% of consumers prioritise level and monitoring controls. |
| Positioning and USB connection | Check that the USB connection and supplied cable, as well as the desk stand or microphone arm, suit your recording space. | If you need to position the microphone securely at your existing workstation and connect it directly, the right mount is essential. Around 17% of consumers focus primarily on positioning and connecting their device. |
| Reducing fan noise afterwards | Check whether you can record a short section with just the fan noise, then distinguish it from your voice in a test recording. | If you can set aside time for a test and for editing relatively consistent fan noise, post-production may be worth considering. Around 16% of consumers make this their main priority. |
A filter won’t remove fan noise in every situation. Audacity notes that noise reduction can produce disappointing results when the noise is loud or changes over time, or when the voice is too quiet compared with the background.
Test your intended speaking position with the fan running and listen to the unedited recording before relying on a filter.
Allow for extra test recordings and editing time if needed.
The RØDE PodMic and PodMic USB are different models. The accessories included with the Sennheiser Profile USB can also vary from one bundle to another.
Check the full model name, connections and what’s included with the specific version.
RØDE recommends a distance of around 5–10 cm for the PodMic USB; according to the manufacturer, speaking from too far away can result in a quiet signal. This advice applies to this model and isn’t a general rule for other microphones.
Check that you can maintain the recommended position for your chosen model throughout the audio label.
The ATR2100x-USB is a dynamic handheld microphone with a cardioid pickup pattern and both USB and XLR connections, designed for voice recordings.
The Profile USB is a USB-C condenser microphone with a cardioid pickup pattern and easily accessible gain, mix and headphone controls.
The dynamic MV7+ combines USB-C and XLR connections with digital features for voice recording.
The dynamic PodMic USB offers USB-C and XLR connections, as well as direct headphone monitoring for close-mic voice recording.
The products below are mainly dynamic USB microphones for close-mic voice recording. The selection also includes a cardioid USB condenser microphone with direct level control.
No image available
For recording a single voice close to the microphone at your computer; the description lists a boom arm for stable positioning.
USB and XLR connections, gain control, mute button and headphone socket. According to the description, the C-clamp is designed for desks less than 2 inches thick.
No image available
For recording voice at your computer when you want to position the microphone using the supplied arm.
USB and XLR connections, mute button, volume control and headphone socket.
No image available
For a single voice recording over USB when a desk stand suits your setup better than a microphone arm.
USB and XLR connections, headphone socket and monitoring volume control. According to the description, a microphone arm isn’t included.
No image available
For USB voice recording if you prefer a condenser microphone and a scissor arm at your recording spot.
The description lists a cardioid pickup pattern, gain control, mute button, headphone output, shock mount and USB cable.
No image available
For recording voice at your computer using a dynamic microphone and desk stand.
The description lists a cardioid pickup pattern, gain control, mute button, headphone monitoring and a USB-A to USB-C cable.
According to Audacity, noise reduction can help with relatively consistent fan noise. First, record a short section with just the fan running. Results may be disappointing if the noise is loud or changes over time, or if it’s too prominent compared with your voice.
You generally don’t need a separate audio interface when recording through a USB microphone’s USB output. If you want to use the XLR output to record on a computer instead, you’ll need a suitable signal path. Audio-Technica describes USB as a way to transfer an analogue signal to a computer without a separate audio interface.
Point the microphone towards your mouth and, with the fan running, record a quiet section, a more emphatic section and a little fan noise on its own. Then listen back to the recording. RØDE recommends a distance of around 5–10 cm specifically for the PodMic USB, not as a general rule for other models.
For consumer purchases in the EU, you’re generally entitled to a minimum statutory guarantee of two years from the date you receive the goods. The European Union’s Your Europe website explains this minimum protection; if the purchase is made by a gallery or business, you should check the specific contractual terms separately.
There isn’t a straightforward yes-or-no answer. If identifiable people are recorded and their personal data is processed, there must be a relevant legal basis. Consent is one possible legal basis, but it isn’t the only one. The Federal Commissioner for Data Protection and Freedom of Information explains the possible legal bases. If you’re recording a voice-only label, try to avoid inadvertently capturing other people’s voices.