Choose your microphone to suit the room and speaking distance. In a quiet room, a USB condenser microphone with easily accessible manual level controls may be a good fit. For close, consistent delivery, you could also consider a directional dynamic model. Test both quiet and emphatic passages from your intended position, then listen back to the recording. If you’re speaking over the original audio, also check headphone monitoring and the volume balance.
Which features suit different speakers?
Expressive speakers
If you switch between quiet and emphatic sentences, look for level controls that let you check louder passages without losing sight of the delivery you’re aiming for. The RNIB stresses that your speaking style should suit the source material and that the volume balance should be right.
Speakers in a challenging room
If your room has noticeable echo or isn’t completely quiet, a close, consistent speaking position may be an important factor in your choice. However, manufacturers’ claims about directionality or noise processing are no substitute for a test recording in your own room.
Speakers recording over the original audio
If you also need to hear playback while recording, check whether you can monitor your voice directly and adjust the balance between the microphone signal and computer audio. Sennheiser and RØDE describe monitoring and mix controls on certain models.
What should you look for when buying?
| Buying consideration |
What to check before buying |
Who will find this most important? |
| Levels and expression |
Check whether the exact model has a gain control or level indicator, and test both the quietest and loudest passages you plan to record. |
If I want quiet words to remain clear and emphatic passages to stay under control, easily accessible level controls are important. Around 33 % of consumers prioritise this when choosing. |
| Room acoustics and speaking distance |
Try the microphone in your intended position with typical sources of background noise. Check whether the stand or boom arm allows you to maintain a close, consistent position. |
If you’re recording alone in a reverberant or not-quite-quiet room, you’ll want to know how your voice sounds in the actual recording position. Around 25 % of consumers prioritise room acoustics and close positioning. |
| Monitoring your voice and the original audio |
Look for a headphone socket, direct monitoring and a mix control. Test the balance with the recording software you use. |
If I’m recording over audio that’s playing, I want to hear my voice and the playback at the right levels. Around 25 % of consumers put this ability to monitor both at the same time first. |
| Connection and accessories |
Compare what’s included with the specific variant against your computer’s connections and the space available for a stand or boom arm. |
If you want a simple USB setup with your existing computer, check the connection and included accessories together. Around 17 % of consumers prioritise finding a setup that works as a whole. |
Which assumptions should I avoid?
-
Assuming automatic level control preserves your expression
Automatic control can even out the output level. That doesn’t mean it will preserve the difference between understated and emphatic sentences in the way you want.
If the specific model variant you’ve chosen offers this option, listen to the same short passage with and without it enabled.
-
Assuming a directional or dynamic microphone can make up for an unsuitable room
Microphone direction and speaking distance still matter. The type of microphone alone can’t guarantee echo-free sound or eliminate all background noise.
Record a test in your intended position to check for echo and typical background noise, keeping to the distance you plan to use.
-
Assuming similarly named models and bundles have the same features
The AT2020USB-X and AT2020USB-XP differ in their documented automatic level control. The accessories included with the Sennheiser Profile depend on the bundle you choose.
Check the full model name, connection and contents of the specific variant.
Which brands and product ranges are worth considering?
Sennheiser
The Profile USB is designed for speakers who want to adjust gain, headphone mix and level display directly on the microphone.
- Sennheiser lists a gain control on the Profile USB, with input-level and clipping indicators, as well as a mix control.
- The desktop and streaming sets differ in the included setup, so check the specific version.
Audio-Technica
The AT2020USB-X offers monitoring and a mix control. The AT2020USB-XP is a separate variant with switchable automatic gain control.
- The range offers different ways to control the microphone signal and computer audio.
- Automatic control is listed for the XP model and shouldn’t be assumed to be a feature of the AT2020USB-X.
RØDE
According to the manufacturer, the NT-USB+ combines USB condenser operation with a mix control, headphone output, desktop stand and pop filter.
- The manufacturer documents what’s included with the NT-USB+ and how its monitoring controls work.
- For a computer with USB-A ports only, the instructions specify an additional compatible cable. The older NT-USB is not the same as the NT-USB+.
Shure
The MV7+ offers USB-C/XLR connectivity and digital level features for close-miked voice recordings.
- Auto-Level and Denoiser are manufacturer-listed features to consider when choosing.
- These features don’t guarantee that echo or background noise will disappear. The stand supplied depends on the variant.
Samson
The Q2U is a dynamic USB/XLR alternative with a headphone socket.
- Samson lists a desktop stand, windscreen and cables among the items included.
- The manufacturer’s claim about use in untreated rooms is no substitute for a listening test with your own voice at your intended speaking distance.
USB microphones for voice recording
The following Joybuy products include USB and USB/XLR models for voice recording, as well as a wireless USB-C lavalier kit. Compare the microphone type, speaking position, connection and accessories with your recording setup.
No image available
FIFINE K688CTW dynamic USB/XLR microphone
A good option if you speak close to the microphone and want to control levels and monitoring.
Includes a boom arm, shock mount and windscreen. A gain control and headphone monitoring are listed. An XLR cable isn’t included; according to the description, the function buttons only work in USB mode.
View at Joybuy
No image available
FIFINE AM8 dynamic USB/XLR microphone
Could suit a fixed-position voice recording setup if you want to use level controls and headphone monitoring.
The description lists a gain control, headphone socket, desktop stand and windscreen. An XLR cable and boom arm aren’t included; RGB lighting and function buttons only work in USB mode.
View at Joybuy
No image available
Dynamic USB/XLR microphone set
Could suit a fixed-position solo voice recording if you want to control gain and monitor directly from the microphone.
The description lists a cardioid pickup pattern, gain control, real-time monitoring and a desktop stand. USB and XLR connections are included in the specifications.
View at Joybuy
No image available
Stream 410 HD USB condenser microphone
Make a test recording in your intended position to see whether the stated omnidirectional pickup pattern suits your room.
The description lists a USB connection, touch mute, pop filter, stand and shock mount.
View at Joybuy
No image available
Moman M1CXT wireless lavalier microphone system, USB-C, 2TX+1RX
A good option if you need a lavalier kit rather than a fixed desktop microphone, or want to record two voices.
The kit is described as having two transmitters, a USB-C receiver and real-time monitoring. The microphones are omnidirectional, so make a test recording to check whether the pickup pattern suits your room.
View at Joybuy
Frequently asked questions
Should I set the levels using only the quiet passages?
No, test the most emphatic passage you plan to record as well. According to the manufacturer, the LED ring on the Sennheiser Profile USB shows the input level and clipping; the AT2020USB-XP lets you try automatic control. Then listen back to see which setting best preserves the expressive dynamics you want.
How do I connect an RØDE NT-USB+ to a computer with USB-A sockets only?
RØDE specifies a USB-C to USB-A cable for this. You may then need to select the microphone as the audio input in your system and software settings.
What should I do if the microphone is faulty or doesn’t suit me after buying it online?
For consumer purchases in Germany, the statutory warranty from the seller is separate from any voluntary guarantee. Distance sales contracts generally come with a 14-day right to cancel; check the terms of your specific purchase.