Which recording set-up suits you?

Interviewers recording in a room with a fan

If you’re mainly recording one person sitting down and can position the microphone close to them, its direction and distance are important for capturing their voice above the fan noise. Audio-Technica and Shure describe the polar patterns of their relevant microphones.

Interviewers sitting across a table

If you want to record both your questions and the other person’s answers, consider your seating arrangement and the microphone’s pickup area together. Audio-Technica also describes sharing one microphone in an interview setting.

Anyone studying subtle pronunciation features

If quiet sounds and subtle dialect features matter, listen back to the recording and compare digital noise processing with an unprocessed test. A manufacturer’s claim about noise reduction doesn’t prove that every nuance of speech will be preserved.

What should you consider when choosing?

First decide whether you need to record one voice or two. Then test the microphone position and any processing you’re considering with the fan running.

What matters What to check before buying Who is it especially relevant to?
Voice and fan noise Check the polar pattern and whether you can position the microphone as needed; test it at the intended seating position with the fan running. If I’m recording one person close up, I want to capture their voice clearly despite the fan. Around 36% of consumers put controlling fan noise first.
Both voices in the conversation Plan the seating arrangement; check whether a shared recording mode or separate microphone positions will work best. If we’re sitting opposite each other, I want both questions and answers to be clear without picking up too much of the room. Around 29% of consumers prioritise capturing both voices.
Pronunciation and recording levels Check for a headphone socket and monitoring; compare processed and unprocessed test recordings. If I want to study subtle or quiet dialect sounds, I need to monitor the recording and avoid using processing without checking it first. Around 21% of consumers prioritise monitoring pronunciation and recording levels.
Setting up in different locations Check the USB connection, cable, stand and headphone monitoring for the specific model version. If interviews take place in different locations, an easy set-up matters more to me than extra recording modes. Around 14% of consumers prioritise portability between locations.

Common mistakes when choosing

  • Assuming an omnidirectional pattern is the answer for every interview

    An omnidirectional pattern picks up sound from every direction. This can be useful when there are several people in the conversation, but it may also pick up more of the running fan.

    If one voice is the main focus, start by testing a directional setting. If there are two voices, try both settings at the table where you’ll be recording.

  • Assuming digital noise reduction guarantees accurate dialect recording

    Advertised noise processing doesn’t prove that every sound important to the interview will be preserved unchanged.

    If details of pronunciation matter, listen to short sections with and without processing, then decide which recording to use.

  • Assuming microphones with similar names are the same model

    The Shure MV6 and MV7+ are different models; likewise, the original HyperX QuadCast is not the same as the QuadCast 2. COMPUTER BILD tested the MV6 and the original QuadCast, not the other models in each pair.

    Before buying, check the full model name, connections and what’s included with the specific version.

Microphone brands to consider

Audio-Technica

The dynamic ATR2100x-USB combines USB and XLR connections and offers headphone monitoring.

  • Audio-Technica describes its cardioid pattern as less sensitive to sound from the sides and rear.
  • There’s no evidence that one suitably positioned microphone will capture two voices at a distance from each other evenly.

CHERRY

According to the manufacturer, the UM 6.0 ADVANCED lets you switch between cardioid and omnidirectional patterns.

  • The manufacturer also lists a gain control, headphone socket and desk stand.
  • In omnidirectional mode, sound is picked up from every direction – bear this in mind when recording a test with the fan running.

Shure

The MV7+ is a USB-C/XLR option with a headphone socket and digital signal processing.

  • Shure advertises a real-time denoiser for the MV7+.
  • Test results for the separate MV6 model can’t be applied to the MV7+; advertised noise processing also doesn’t prove that subtle dialect sounds will be preserved.

RØDE

The dynamic PodMic USB and the compact, condenser-based NT-USB Mini are different options.

  • RØDE lists headphone monitoring for both models.
  • Their designs and positioning requirements differ. COMPUTER BILD reported clearly audible popping sounds with the NT-USB Mini it tested.

HyperX

According to the manufacturer, the QuadCast 2 offers four selectable polar patterns, a headphone socket and a desk stand.

  • The different polar patterns may be useful for changing conversation set-ups.
  • A test result for the original QuadCast is not an assessment of the QuadCast 2.

USB microphones at Joybuy

The Joybuy models below are USB microphones for voice recording; several are dynamic, directional options for one main speaker sitting close to the microphone.

FIFINE AM8 dynamic USB/XLR microphone

FIFINE AM8 USB/XLR

This dynamic microphone with a cardioid pattern is an option for one main speaker sitting close to it; headphone monitoring is listed.

According to the description, the gain control and mute button only work in USB mode. A desk stand is included; a microphone arm and XLR cable are not.

View at Joybuy
FIFINE K688CT dynamic USB/XLR microphone set with microphone arm

FIFINE K688CT USB/XLR microphone set

This dynamic microphone with a cardioid pattern and headphone monitoring is described as suitable for one main speaker sitting close to it.

According to the description, the set includes a microphone arm, desk clamp, shock mount and windscreen. The clamp is specified for desk tops under 2 inches thick; an XLR cable is not included.

View at Joybuy
Razer SEIRÉN V3 MINI White USB microphone

Razer SEIRÉN V3 MINI White

This USB condenser microphone is described as having a supercardioid pattern; test its position with the fan running where you intend to use it.

Features listed include USB-C, tap-to-mute, an integrated shock mount and an adjustable tilt stand.

View at Joybuy
Dynamic USB/XLR microphone set with desk stand

Dynamic USB/XLR microphone set

The microphone is described as having a cardioid pattern and headphone socket for monitoring; test its position with the fan running when recording one main speaker close up.

Features listed include a desk stand, mounting thread, gain control and mute button.

View at Joybuy
USB condenser microphone with RGB lighting and Type-C adapter

USB condenser microphone with Type-C adapter

A headphone socket for monitoring and a mute button are listed for voice recording. No specific interview set-up is described, so test the recording with both voices and the fan running.

According to the product name, the set includes a Type-C adapter and consists of seven parts.

View at Joybuy

Frequently asked questions

How should I position the microphone if the fan has to stay on?

If one person is doing most of the talking, point the front of a directional microphone towards them and test its position with the fan running. If air is blowing directly onto the microphone, adjust the set-up too, as moving air can cause unwanted noise in its own right. This won’t guarantee a noise-free recording.

Is one USB microphone enough for the interviewer and interviewee?

It can work if the seating arrangement and pickup area suit the distance between both people. Sharing a microphone or switching to an omnidirectional mode can make it easier to record both people together, but may also pick up more room noise. Check both voices in a test recording.

Do I need an audio interface for a USB microphone?

You don’t need a separate audio interface just to connect the USB models described here for USB recording. If you later want to use the XLR output of a hybrid model, the rest of your recording equipment will need to be compatible.

What happens if a product develops a fault after I buy it in Germany?

When you buy from a business seller, your statutory consumer rights apply; the EU’s Your Europe consumer information gives a two-year period from the date you receive the goods. The seller is responsible for statutory claims. Any additional manufacturer’s guarantee is separate.

Can I record a dialect interview in Germany without the other person knowing?

Section 201 of the German Criminal Code (StGB) prohibits recording another person’s non-public speech without authorisation. So make sure you discuss the recording with everyone involved before you begin. Further processing of personal data also requires an appropriate legal basis under the GDPR; consent is one possible legal basis, but not the only one.