Which microphone setups suit different recording needs?

Solo host in a reverberant room

If you’re recording the introduction on your own and can position the microphone close to you, its direction and how much room sound it picks up are important considerations. Audio-Technica notes that close-miking is relevant for dynamic USB microphones.

Host with an in-person guest

If you might also record the conversation, consider whether you’d like to share one microphone or give each person their own. An additional input may be useful; with the Shure MV7i, you’ll still need a second microphone.

Host with a changing setup

If you plan to start recording directly via USB but might use different recording equipment later, check the connections on the specific model. According to the manufacturers, the RØDE PodMic USB and Audio-Technica ATR2100x-USB both offer USB and XLR connections.

What should you look for when choosing a microphone?

Close-miked directional microphone

A good fit if: you’re recording the introduction on your own and can position the microphone close to your mouth.

The trade-off: You’ll need to get the positioning right, and the microphone may be visible in shot.

Microphone with a wider pickup area

A good fit if: you can’t position the microphone close to one person or want to capture several people from a single position.

The trade-off: A wider pickup area may capture more sound from an untreated room. The CHERRY UM 6.0 ADVANCED’s omnidirectional setting picks up sound from all directions.

Separate microphones or inputs

A good fit if: you want to record both voices in the conversation as well as the introduction, using microphones positioned close to each speaker.

The trade-off: You’ll need an additional microphone; the Shure MV7i also adds another input.

For a solo recording, first check whether you can position the microphone correctly and listen to a test recording through headphones. If you’re recording a guest too, decide before buying whether one shared microphone or separate microphone positions will work best for your conversation.

What you need What to check before buying Who this matters most to
Clear solo voice recording Directional pickup and a suitable close position; headphone socket for listening to a test recording. If I’m speaking alone in an untreated room, I want to record my voice up close and check how much room sound is picked up before the actual take. Around 42% of consumers put room reverberation first.
Easy USB setup A compatible USB connection and cable; direct headphone monitoring if you want to check the recording. If I want to record directly to my computer without a separate audio interface, I look for a straightforward connection and easy monitoring. Around 25% of consumers prioritise getting started via USB.
Recording two people Check whether one shared microphone will do or whether you’ll need a second microphone and an additional input. If I want to record my guest too, I want to work out in advance whether we can both speak close to one microphone or need separate microphones. Around 17% of consumers put recording two voices first.
Room to expand later Check whether the specific model has USB and XLR connections, and whether a cable and stand are included. If I want to change my recording setup later, extra connection options matter more to me than features I don’t need for my first introduction. Around 16% of consumers prioritise expandability.

Avoiding buying and setup mistakes

  • Assuming a high sample rate means less room reverberation

    The sample rate doesn’t tell you how much reflected sound will reach the microphone at your speaking distance.

    Start by checking the distance and direction, then record a short passage and listen back. Compare technical resolution specifications afterwards.

  • Choosing an omnidirectional setting as an automatic solution for two people

    CHERRY says that the UM 6.0 ADVANCED picks up sound from all directions in omnidirectional mode. In an untreated room, this may make more background noise audible in the recording.

    If you want to record both speakers, compare using one shared microphone position with using two microphones positioned close to each person, then listen to a test recording.

  • Assuming similarly named models or kits are identical

    Connections and items included vary between specific models and versions. An XLR output alone doesn’t mean you can record two interview voices separately.

    Check the full model name, inputs and outputs, and the stated contents. Depending on your setup, you may need an extra microphone, stand or cable; according to the product description, the XLR cable isn’t included with the FIFINE K688CT.

Key microphone brands at a glance

RØDE

The dynamic PodMic USB combines USB-C and XLR, making it an option for a close-miked solo introduction.

  • RØDE lists USB monitoring and onboard processing among the model’s features.
  • RØDE recommends a distance of around 5–10 cm for the PodMic USB. This model-specific recommendation doesn’t automatically apply to other microphones; with this model, a greater distance may result in a quiet signal.

Audio-Technica

The dynamic ATR2100x-USB has USB and XLR connections, a cardioid pickup pattern and a desktop tripod stand.

  • Audio-Technica lists direct headphone monitoring and included connection cables among the model’s features.
  • The manufacturer notes that close positioning can be important with dynamic microphones, and that this may make them visible in shot.

Shure

The MV7+ is a USB/XLR option with the manufacturer’s own signal processing. The MV7i also has an input for an additional microphone.

  • Shure lists Auto Level, a denoiser and Voice Isolation as features of the MV7+; the MV7i offers separate recording modes for two microphones.
  • These are model-specific features stated by the manufacturer, not a guarantee of recordings free from reverberation. You’ll still need an additional microphone to record a second person with the MV7i.

CHERRY

The UM 6.0 ADVANCED is a USB desktop microphone with switchable cardioid and omnidirectional pickup patterns.

  • CHERRY lists a headphone socket, gain control and included USB cable.
  • In omnidirectional mode, the microphone picks up sound from all directions, according to CHERRY. In an untreated room, this may be a reason to avoid this setting.

USB microphones for a solo introduction

This selection from Joybuy includes USB microphones for voice-led solo recordings, including dynamic models designed for close positioning and other USB microphones with directional pickup options.

FIFINE AM8 USB/XLR Dynamic Microphone

FIFINE AM8 USB/XLR Dynamic Microphone

For a solo introduction when you want to position a dynamic microphone close to you and monitor the recording through headphones.

USB-C and XLR; cardioid pickup pattern; headphone socket and desktop stand. According to the product description, the microphone buttons and RGB features are only active in USB mode.

View at Joybuy
FIFINE K688CT Podcast Microphone Kit USB/XLR

FIFINE K688CT Podcast Microphone Kit USB/XLR

An option for close-miked solo recording if you want to use the included boom arm.

Dynamic microphone with a cardioid pickup pattern, USB-C, headphone socket and gain control. According to the product description, the XLR cable isn’t included; the microphone buttons only work in USB mode.

View at Joybuy
Razer SEIRÉN V3 MINI White USB Microphone

Razer SEIRÉN V3 MINI White

For solo voice recording when you want to position a compact USB microphone on your desk.

USB-C connection, supercardioid pickup pattern, adjustable tilt stand and tap-to-mute function.

View at Joybuy
JBL Quantum Stream Studio USB-C microphone

JBL Quantum Stream Studio USB-C

For a solo introduction when you want directional recording and direct voice monitoring.

USB condenser microphone with several selectable pickup patterns, including cardioid, flexible mounting and a dynamic compressor.

View at Joybuy

Frequently asked questions about recording interviews

Do I need a second microphone to record an introduction on my own?

No, you don’t need a second microphone to record an introduction on your own. An additional input is useful if you also want to record another person using their own microphone; whether one shared microphone will do depends on the distance and the room sound.

How should I position the microphone for a test recording?

Point the active side of the microphone towards your mouth, record a short passage and listen back through headphones. For the PodMic USB, RØDE recommends a model-specific distance of around 5–10 cm; don’t apply this recommendation to other models without checking first.

Are statutory rights and a manufacturer’s guarantee the same thing?

No. When consumers buy goods in the EU, they generally have a minimum two-year legal guarantee against the seller from the date they receive the goods. Your Europe explains that an additional commercial guarantee doesn’t replace this legal guarantee; check separately what a manufacturer offers voluntarily.

Can I record an interview guest’s voice without their knowledge?

Under § 201 StGB, making an unauthorised recording of another person’s non-public spoken words on an audio medium is a criminal offence. If you also want to record a private conversation, make sure you have permission to record it first; this doesn’t settle questions about later publication or data protection.

How should I dispose of an old USB microphone?

Take an old microphone to an appropriate local collection or take-back point instead of putting it in your household rubbish. The German Environment Agency explains that the ElektroG, among other things, regulates the take-back and environmentally sound disposal of electrical and electronic waste.