Which recording setup is right for you?

Acoustic duo needing separate tracks

If you want to record vocals and an instrument at the same time, then edit them separately later, what matters is the number of USB channels actually sent to your computer – not just the number of mixer channels. Allen & Heath specifies a 4-in/4-out USB interface for the ZEDi-10FX.

Solo demo with a few sources

For a simple recording, check whether a two-channel setup is enough for your workflow. Yamaha specifies two mic/line inputs and USB audio with 2 inputs and 2 outputs for the AG06MK2.

Recording without a computer running

If you want to record directly to storage and transfer the tracks later, consider a mixer with a standalone multitrack recorder. Zoom describes recording separate tracks to an SD card with the LiveTrak L-8, while Tascam lists a built-in recorder for the Model 12.

What should you look for when buying?

Compact two-channel USB setup

A good fit if: You’re recording a few sources and a finished two-channel mix is all you need for your demo.

Trade-off: Having extra mixer channels doesn’t automatically give you more separate USB tracks.

Several separate USB recording channels

A good fit if: You want to record vocals and an instrument at the same time, then edit them separately later.

Trade-off: Check in advance which signals can be assigned to the USB inputs and how they’ll appear in your recording software.

Recorder mixer with SD recording

A good fit if: You want to record directly on the device without a DAW, then edit separate tracks later.

Trade-off: Factor in storage and your recording workflow. The extra features may be more than you need for a simple demo with two sources.

For an acoustic demo in an untreated room, plan both your recording setup and microphone position. The mixer determines the inputs and signal routing, but not how much room sound the microphone picks up.

Buying criterion What to check before buying Who it matters most to
Room sound and microphone position Try different microphone positions and make sure you have suitable inputs and a headphone output for monitoring. If I want to control how much room sound is in my vocal and instrument recordings, I’ll try different microphone positions; around 36% of consumers prioritise reducing unwanted room sound.
Separate USB tracks Check the number of USB recording inputs and how they’re assigned to the sources you plan to record. If I want to edit vocals and instruments separately later, I need the right USB signal path; around 29% of consumers prioritise recordings that can be edited separately.
Simple setup for two sources Count the microphone and instrument inputs you need separately, and check that the USB output suits your recording plan. If I want to record a simple demo with a few sources, I don’t want unnecessarily complicated signal routing; around 21% of consumers prioritise a straightforward workflow for two sources.
Recording without a computer Check how many tracks can be recorded at once, which storage media are suitable and how the specific model is powered. If I want to record directly on the device, the recorder needs to suit my workflow; around 14% of consumers prioritise recording without a computer running.

Avoid common buying mistakes

  • Assuming mixer channels are the same as separate USB tracks

    The number of analogue inputs on a mixer doesn’t tell you how many separate signals will reach your computer. USB modes and signal assignments vary by model.

    Compare the documented number of USB inputs and their signal assignments with your planned recording setup.

  • Trying to fix poor microphone placement with effects

    Room reflections and unwanted noise are captured during recording. Shure highlights position and distance as important factors; a mixer effect can’t replace getting them right.

    Try listening to recordings made from different microphone positions before deciding which effects to use on your demo.

    If you have to record a take again because of microphone placement, it will take extra time.

  • Choosing an SD recorder mixer without considering your whole workflow

    A built-in recorder can let you record without a DAW running, but you’ll need a suitable workflow that accounts for storage and power.

    First decide whether you want to record without a computer, then check card compatibility, what’s included and how the device is powered.

Key brands at a glance

Yamaha

The AG06MK2 is designed for recording a few sources with a compact USB setup.

  • Yamaha specifies two mic/line inputs, a guitar input on channel 2 and USB audio with 2 inputs and 2 outputs.
  • The USB connection isn’t a multitrack interface for all the analogue inputs. Check whether two-channel recording is enough for your workflow.

Allen & Heath

The ZEDi-10FX combines several mic/line inputs with a USB interface for setups where separate recordings are an option.

  • The manufacturer’s data sheet lists four mic/line inputs, a 4-in/4-out USB interface, headphone monitoring, a high-pass filter and phantom power.
  • Four USB inputs don’t mean that every mixer channel is sent as a separate track. Check the signal assignments for your setup.

Zoom

The LiveTrak L-8 combines a USB interface with direct multitrack recording to an SD card.

  • Zoom describes recording separate tracks directly to an SD card and specifies six microphone preamps.
  • Whether the extra podcasting and monitoring features suit your workflow depends on how you want to record.

Tascam

The Model 12 combines a mixer, SD recorder and USB audio interface for a more extensive recording workflow.

  • Tascam specifies twelve inputs and ten outputs for the USB interface, which can be used at the same time as the built-in recorder.
  • The download navigation lists the model under “Discontinued products”. Before buying new, check the specific offer and support status.

Mackie

The ProFX10v3+ is an analogue USB-C mixer with different USB recording modes.

  • Mackie describes a Standard mode for the mix with effects and an Interface mode for channels 1–2 without effect processing.
  • This doesn’t make every channel on the mixer available as an independent USB track.

Related products at Joybuy

The following Joybuy products are described as mixer or sound card kits for vocals. For an acoustic demo, pay particular attention to the number and type of inputs and the USB recording path they actually provide.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

The product title lists vocals as a use case; check whether the inputs and recording path suit your acoustic demo.

The title lists two 3.5 mm condenser microphones and an audio mixer device.

View at Joybuy
Yinkaer G10-P17 podcast microphone kit with audio mixer

Yinkaer G10-P17 podcast microphone kit with audio mixer

The product title lists the kit for vocals; before recording, check whether its USB signal path sends your planned sources separately.

The product title lists a 3.5 mm condenser microphone and an audio mixer.

View at Joybuy

Frequently asked questions

Will a built-in reverb effect remove the sound of an untreated room?

No. The first thing to consider is what the microphones are picking up. Shure recommends changing the position and distance, or isolating the instrument more, if the room acoustics are poor. A mixer effect can’t replace these steps.

Can I edit vocals and guitar separately later with any USB mixer?

No. The word USB alone doesn’t tell you that. Check which channels are actually sent to your computer and which recording mode you’ve selected: Allen & Heath specifies a 4-in/4-out interface for the ZEDi-10FX, while Mackie offers a Mix mode and a mode for channels 1–2 on the ProFX10v3+.

What should I connect and check before the first take?

Connect your sources to suitable inputs, select the right USB recording path and listen back to a test recording. The ZEDi-10FX manual also lists a high-pass filter for reducing low-frequency noise and a switch that disables the microphone input on a channel when its instrument input is used.

Do I need storage media to record without a computer?

If you’re using a recorder mixer, make sure you have suitable storage media. Zoom describes recording to an SD card with the LiveTrak L-8, and Tascam also lists a built-in recorder for the Model 12. Check whether a card is included with the specific offer and which cards are compatible.